Classic - Shower head Mora - Free user manual and instructions

Product Type	Shower head
Brand	Mora
Model	Classic
Category	Shower head
Material	Chrome-plated brass and ABS plastic
Dimensions	Approx. 21 x 21 x 10 cm (head diameter and depth)
Weight	Approx. 0.5 kg (with mounting accessories)
Installation Type	Wall-mounted slide rail
Water Flow	Standard flow rate (approx. 10-12 L/min)
Spray Modes	Single spray pattern (rain)
Swivel Joint	Adjustable angle for flexible positioning
Mounting Accessories	Slide rail, mounting bases, threaded collars, anchors
Drill Bit Size	8 mm for pilot holes
Cleaning Instructions	Wipe dry after use; use only soap-based cleaners
Prohibited Cleaners	Abrasive powders, alcohol, nitric acid, phosphoric acid, disinfectants
Limescale Prevention	Dry surface after each use to prevent mineral deposits
Safety Notes	Avoid aggressive cleaning agents; do not use abrasive sponges
Repairability	Slide rail assembly and mounting parts user-replaceable
Spare Parts Availability	Mounting bases, threaded collars, slide rail
Warranty	2 years (standard manufacturer warranty)
Country of Origin	Sweden (Mora is a Swedish brand)

Frequently Asked Questions - Classic Mora

How do I install the Mora Classic shower head?

Place the template at your desired mounting location. Mark the surface at the fastening points, drill 8 mm pilot holes, and insert the anchors. Secure the mounting bases with the threaded collars, then mount the slide rail and tighten the collars.

Can I adjust the height of the shower head?

Yes, the slide rail allows you to adjust the height of the shower head by moving the holder up or down along the rail.

How do I clean the shower head?

Wipe the surface dry with a towel after each use to prevent limescale. For cleaning, use only soap-based agents. Avoid abrasive powders, alcohol, nitric acid, phosphoric acid, and disinfectants.

What should I do if the water flow reduces?

Reduced flow is often due to limescale buildup. Soak the shower head in a mild descaling solution (e.g., vinegar and water) for 15 minutes, then rinse thoroughly. Ensure the nozzles are not blocked.

Is the shower head compatible with all shower hoses?

The Mora Classic uses a standard 1/2 inch thread connection, making it compatible with most shower hoses available in the market.

Can I replace the slide rail or mounting parts?

Yes, spare parts such as mounting bases, threaded collars, and slide rails are available. You can order them from Mora or authorized dealers.

Does the shower head have multiple spray patterns?

The Mora Classic features a single spray pattern that provides a steady rain-like shower. It is designed for simplicity and ease of use.

How do I prevent limescale spots on the chrome?

Wipe the shower head dry with a soft towel after each use. This prevents water droplets from evaporating and leaving limescale marks.

What is the warranty period for the Mora Classic?

Mora provides a standard 2-year warranty against manufacturing defects. Keep your proof of purchase for warranty claims.

Can I use the shower head with a low-pressure water system?

Yes, the Mora Classic is designed to work with standard water pressure systems. For very low pressure, ensure the water supply line is not restricted.

USER MANUAL Classic Mora

Mounting instruction

1. Place template at desired mounting location and mark mounting surface to correspond with fastening points.

2. Drill pilot holes by using an 8 mm bit and insert anchors.

3. Secure mounting bases with threaded collars to mounting surface. Place the slide rail on mounting bases and thread collars onto slide rail assembly and tighten.

Service instruction

Cleaning: Water contains limescale, to a greater or lesser extent, which is retained on the surface of the product leaving marks after the water droplets have evaporated. You can prevent lime-marks from forming by getting into the habit of always wiping the product dry with a towel, immediately after use.

Caution: When cleaning the product, use only soap-based agents. Never use abrasive or scouring powders, cleaning agents containing alcohol, nitric acid or phosphoric acid, or disinfectants.

Русский