Zanussi-Electrolux

ZSF6161S - Dishwasher Zanussi-Electrolux - Free user manual and instructions

Find the device manual for free ZSF6161S Zanussi-Electrolux in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Zanussi-Electrolux ZSF6161S - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeBuilt-in Dishwasher
BrandZanussi-Electrolux
ModelZSF6161S
Dimensions (H x W x D)85 x 60 x 60 cm
WeightApprox. 35 kg
Power Supply220-240 V, 50 Hz
Place Settings12 place settings
Energy Efficiency ClassA+
Annual Energy Consumption287 kWh
Annual Water Consumption3080 L
Noise Level46 dB (A)
Cycle ProgramsEco, Auto, Intensive, Quick 30min, Glass, Pre-Rinse
Key FeaturesAdjustable upper basket, Delay Start (1-24h), Half Load, Salt and Rinse Aid indicators
Safety FeaturesChild Lock, Anti-Flood System, Waterproof casing
Control PanelElectronic with LED display, buttons
InteriorStainless steel tub, plastic coated racks
Spare Parts AvailabilityGenuine spare parts available for 10+ years
ReparabilityModular design, user-serviceable parts (filters, spray arms)
CertificationsCE, WEEE compliant
Included AccessoriesSalt funnel, rinse aid dispenser, quick guide

Frequently Asked Questions - ZSF6161S Zanussi-Electrolux

How do I install the ZSF6161S dishwasher?
Ensure the dishwasher is placed on a stable surface. Connect to cold water supply (3/4 inch thread) and electrical outlet (230V). Level the machine with adjustable feet. Refer to the manual for detailed steps.
What type of detergent should I use?
Use dishwasher detergent (tablets, powder or gel) designed for automatic dishwashers. Avoid using hand dish soap. For best results, use combined tablets with salt and rinse aid.
How do I add salt and rinse aid?
Salt: Open the salt container cap, fill with dishwasher salt until full, then close. Rinse aid: Adjust the rinse aid dispenser setting (1-6), fill to MAX level and close.
What does the error code E01 mean?
Error E01 indicates a water intake problem. Check if the water tap is closed or kinked in the inlet hose. Also clean the inlet filter.
How do I clean the filters?
Remove the lower basket, unscrew the fine filter assembly, rinse under running water. Clean the coarse filter and reinstall. Do this monthly for optimal performance.
Can I use half load function?
Yes, select the Half Load option (if available) on the control panel. This uses less water and energy for smaller loads.
How long is a typical cycle?
Eco cycle: ~3.5 hours; Quick 30min: 30 minutes; Intensive: ~2.5 hours. Actual time depends on temperature and soil level.
Why is there water left inside after a cycle?
Small amount of water under the filters is normal. If excessive, check drain hose for kinks or clogs. Also ensure the pump filter is clean.
How do I enable child lock?
Press and hold the Start/Reset button for 3 seconds until the indicator flashes. To disable, repeat the same operation.
Where can I find spare parts like spray arms?
Search online for Zanussi-Electrolux ZSF6161S spare parts on official websites or authorized dealers. Use the model number to find correct parts.

User questions about ZSF6161S Zanussi-Electrolux

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual ZSF6161S - Zanussi-Electrolux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZSF6161S by Zanussi-Electrolux.

USER MANUAL ZSF6161S Zanussi-Electrolux

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Zanussi-Electrolux

Model : ZSF6161S

Category : Dishwasher