ITAC-10KSA - Air conditioner Impecca - Free user manual and instructions

Product Type	Portable Air Conditioner
Model	ITAC-10KSA
Brand	Impecca
Cooling Capacity (BTU)	10,000 BTU (ASHRAE) / 6,500 BTU (DOE)
Heating Capacity (BTU)	8,500 BTU (heat pump mode)
Coverage Area	Up to 400 sq. ft.
Energy Efficiency Ratio (EER)	10.5
Power Supply	115 V / 60 Hz / 10.5 A
Power Consumption (Cooling)	950 W
Refrigerant Type	R-410A
Dimensions (W x D x H)	18.5 x 14.2 x 28.3 inches
Weight	68 lb
Noise Level (Low/High)	47 dB / 53 dB
Airflow (CFM)	220 CFM
Modes	Cool, Heat, Fan, Dehumidify
Fan Speeds	3 (Low, Medium, High)
Thermostat Control	Digital, remote included
Timer	24-hour programmable timer
Remote Control	Yes, included
Filter Type	Washable, reusable mesh filter
Filter Maintenance	Clean every 2 weeks; replace if damaged
Drainage	Self-evaporating (continuous drain optional)
Window Kit Included	Yes, adjustable for vertical/horizontal windows
Safety Features	Auto shut-off, tip-over protection, overheat protection
Warranty	1 year limited

Frequently Asked Questions - ITAC-10KSA Impecca

How often should I clean the air filter?

Clean the washable mesh filter every two weeks during heavy use. A clogged filter reduces efficiency and can cause the unit to freeze up.

My remote control is not working. What should I do?

First, check if batteries are installed correctly or replace them with new ones. Ensure there is no obstruction between the remote and the unit. If still not working, try resetting the unit by unplugging for 10 minutes.

What does the error code E1 mean?

Error code E1 indicates a room temperature sensor failure. Please contact Impecca customer service for assistance.

Can I use an extension cord with this air conditioner?

It is not recommended. Plug the unit directly into a grounded 3-prong outlet. Using an extension cord may cause voltage drop or overheating.

How do I install the window kit?

The window kit includes an adjustable panel and seal. Extend the panel to fit your window width, install the seal, and lock it in place. Refer to the manual for specific steps.

Does this unit have a heating function?

Yes, the ITAC-10KSA is a heat pump model that provides both cooling and heating. It can heat effectively down to 50°F (10°C) outdoor temperature.

How do I set the timer?

Press the Timer button on the remote or control panel. Use +/- to select the desired hours (1-24). The unit will turn off (or on if already off) after the set time.

Why is water leaking from the back?

In high humidity, the unit may produce excess condensation. Use the continuous drain option: attach a garden hose (not included) to the drain port. Ensure the unit is slightly tilted backward.

What are the dimensions and weight of this unit?

Dimensions: 18.5 x 14.2 x 28.3 inches (WxDxH). Weight: 68 lb. Measure your space before purchasing.

How do I switch between cooling and heating?

Press the Mode button until you see the sun icon for heat or the snowflake icon for cool. The unit will change modes, but allow a few minutes for the compressor to adjust.

USER MANUAL ITAC-10KSA Impecca

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©

©