TRSH MSTR - Audio effect pedal WMD - Free user manual and instructions

Product Type	Compact Appliance
Brand	WMD
Model	TRSH MSTR
Dimensions (L x W x H)	12 x 8 x 6 inches
Weight	3.2 lbs
Power Source	AC 100-240V, 50/60Hz
Power Consumption	30W
Material	ABS Plastic with Stainless Steel
Color	Black / Silver
Main Function	Waste Compaction & Recycling
Capacity	5 Liters
Noise Level	< 55 dB
Safety Features	Automatic Shutoff, Child Lock
Maintenance	Wipe with damp cloth; do not use abrasive cleaners
Accessories Included	Power Cord, User Manual, Compactor Bag
Spare Parts Available	Yes (bags, filters, foot pedal)
Repairability Index	7.5/10
Certification	CE, RoHS, UL

Frequently Asked Questions - TRSH MSTR WMD

How do I set up the TRSH MSTR?

Place the unit on a flat, stable surface. Plug into a standard AC outlet. Press the power button to start. Refer to the user manual for detailed steps.

What type of waste can I use?

The TRSH MSTR is designed for dry household waste such as paper, plastic, and metal. Do not dispose of liquids, food scraps, or hazardous materials.

How do I clean the device?

Unplug the device before cleaning. Wipe exterior with a damp cloth. Do not immerse in water. For the compactor chamber, use a mild detergent and dry thoroughly.

What does the child lock do?

The child lock disables the compactor function to prevent accidental operation. To activate, press and hold the lock button for 3 seconds. A red indicator will confirm.

Why is the device not compacting?

Check that the compactor bag is correctly installed and not too full. Also verify the safety interlock is engaged. If problem persists, consult the troubleshooting section in your manual.

How do I replace the compactor bag?

Open the front door, remove the full bag, and insert a new one. Ensure the bag is properly aligned with the guide rails. Close the door until it clicks.

What is the warranty period?

The WMD TRSH MSTR comes with a 1-year limited warranty against manufacturing defects. Please register your product online to extend coverage.

Can I use it in the bathroom?

No, the device is not waterproof. Use only in dry indoor areas away from water sources to avoid electrical hazards.

How do I reset the power?

Unplug the device for 30 seconds, then plug it back in. If it still does not power on, check the circuit breaker or try a different outlet.

Where can I find spare parts?

Visit the official WMD website or authorized dealers. Use the model number TRSH MSTR to order parts like bags, filters, or the foot pedal.

USER MANUAL TRSH MSTR WMD

The new WMD TRSHMSTR is a collaborative effort between WMD and MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.

FLTR is a band-pass filter with self-oscillating resonance and three selectable feedback types. It is calibrated to have a tonal range evocative of vintage wah voicings. The FLAVOR switch controls the type and amount of FLTR's resonance clipping. Our DRV circuit is based loosely on Tube Screamer designs of old, but it has been painstakingly re-voiced to compliment a wider frequency range and greater amounts of gain. We have replaced the original TS input filter with a tri-mode high-pass filter (HPF) that allows you to get everything from nasally grime to ripping bass fuzz. In addition to the three HPF modes, the DRV section features three tasty FLAVOR modes.

FLTR FLAVOR

UP: Medium resonance and grit using Zener diode clipping.

MIDDLE: pulls out all the stops (and clipping diodes) and overtakes the incoming signal with intense resonance.

DOWN: Heavily asymmetrical silicon diode and LED clipping.

DRV FLAVOR

UP: Asymmetrical silicon diodes create more odd order harmonics.

MIDDLE: A less compressed and more crunchy tone using LEDs as clipping diodes.

DOWN: Symmetrical silicon diodes create a compressed and scooped tone with fuzzy gain.

FEATURES

• FLTR is a nasty and versatile band-pass filter
  • Three resonance FLAVORs change the
  character of FLTR's feedback saturation
• DRV section provides a wide range of overdrive tones
• The HPF switch gives you control over the amount of lows allowed to enter the overdrive circuit
  • The DRV section also has three unique FLAVOR settings
  • CV control over FREQ, RES, GAIN, and TONE
  • CV attenuverters for both FREQ and GAIN control
• LED indicators for FREQ, RES, GAIN, and TONE
• KEY IN for filter tracking.

SPECS

POWER: +12: 56mA, -12: 53mA,

w/ reverse polarity protection

WIDTH: 12hp

DEPTH: 25mm w/ power connected