Q: How do I activate the Super Freeze function on my Thermador T24IR905SP refrigerator?

To activate the Super Freeze function on your Thermador T24IR905SP refrigerator, you need to use the touch controls: Press the temperature adjustment button to open the menu Press the Super Freeze button (marked with a snowflake symbol) Confirm your selection Important Information Automatic shut-off: The function automatically stops after about 6 hours of continuous operation Increased noise: The appliance may operate more loudly during this intensive mode Recommended use: Activate it before storing large quantities of fresh food or to quickly cool beverages

Q: How to access the Basic Settings function (c1 and 0) of the THERMADOR CIT304KB cooktop?

The issue you are encountering is likely due to the critical access delay : you only have 10 seconds after turning on to press PANEL LOCK and access c1 and 0. Correct procedure to access Basic Settings: Ensure that the cooktop is completely off and the timer is inactive Turn on the cooktop with the main switch Immediately (within 10 seconds), press and hold the PANEL LOCK button continuously until you hear a beep sound The display should then show " c 1 " at the top left and " 0 " at the top right Key points if it does not work: The 10-second timing is strict - do not hesitate before pressing PANEL LOCK Keep PANEL LOCK pressed without releasing until the beep sound Make sure you are using the PANEL LOCK button (and not another key) If the beep does not occur after 10 seconds, the cooktop returns to normal mode - start over from the beginning Once in Basic Settings mode, you can navigate with PANEL LOCK between c1, c2, c6, c7, c9, c0, and modify the values with the numeric keys. Hold PANEL LOCK for 4 seconds to validate each change.

Question 1

How do I activate the Super Freeze function on my Thermador T24IR905SP refrigerator?

Accepted Answer

To activate the Super Freeze function on your Thermador T24IR905SP refrigerator, you need to use the touch controls:

Press the temperature adjustment button to open the menu
Press the Super Freeze button (marked with a snowflake symbol)
Confirm your selection

Important Information

Automatic shut-off: The function automatically stops after about 6 hours of continuous operation
Increased noise: The appliance may operate more loudly during this intensive mode
Recommended use: Activate it before storing large quantities of fresh food or to quickly cool beverages

Question 2

How to access the Basic Settings function (c1 and 0) of the THERMADOR CIT304KB cooktop?

Accepted Answer

The issue you are encountering is likely due to the critical access delay: you only have 10 seconds after turning on to press PANEL LOCK and access c1 and 0.

Correct procedure to access Basic Settings:

Ensure that the cooktop is completely off and the timer is inactive
Turn on the cooktop with the main switch
Immediately (within 10 seconds), press and hold the PANEL LOCK button continuously until you hear a beep sound
The display should then show "c 1" at the top left and "0" at the top right

Key points if it does not work:

The 10-second timing is strict - do not hesitate before pressing PANEL LOCK
Keep PANEL LOCK pressed without releasing until the beep sound
Make sure you are using the PANEL LOCK button (and not another key)
If the beep does not occur after 10 seconds, the cooktop returns to normal mode - start over from the beginning

Once in Basic Settings mode, you can navigate with PANEL LOCK between c1, c2, c6, c7, c9, c0, and modify the values with the numeric keys. Hold PANEL LOCK for 4 seconds to validate each change.

Question 3

Water hammer noise during operation of the water dispenser

Accepted Answer

The water hammer noise that you hear from the water dispenser of your Thermador T18ID900LP freezer is generally caused by a rapid closure of the dispenser's solenoid valve, which creates a pressure shock in the piping. This phenomenon is generally safe for your appliance, but it can be reduced by performing a few simple checks.

Check the water pressure: According to the technical manual for the T18ID900LP, your appliance requires a water pressure between 0.2 and 0.8 MPa, or 2 to 8 bars (29 to 116 psi). Excessive pressure amplifies the water hammer. If your pressure exceeds 0.8 MPa, you need to install a pressure regulator (or reducer) on the main water supply line before connecting to the appliance. Consult a plumber if you are unsure how to check your water pressure.

Replace the water filter: The manual specifies that the filter should be changed every 6 months at most. A clogged filter increases resistance to flow and can intensify the water hammer. To replace the filter: 1) Turn the cartridge valve to the left (counterclockwise), 2) Remove the old filter, 3) Insert the new filter by pushing it until it stops, then turn it to the right until it clicks, 4) Pour the first 5 glasses of water into the sink to purge the air from the system.

Check the piping and connections: Ensure that all water pipes are securely fastened and do not vibrate against walls or other elements. Poorly secured pipes amplify the noise. Also check that all connections are tight, that there are no visible leaks, and that the supply line is neither bent nor crushed.

Reduce the water flow at the source: If water enters your home too quickly, it creates more energy during rapid closures. You can partially close the main water shut-off valve to slightly reduce the flow. This solution is useful while waiting for professional intervention.

If the noise persists despite these checks, the valve of the dispenser itself may need cleaning or replacement. Contact Thermador customer service at 1-800-735-4328 (toll-free number) or a certified appliance technician who can diagnose the problem and intervene if necessary.

User manual THERMADOR : user manuals and guides in PDF

Models THERMADOR most viewed

Browse manuals THERMADOR by appliance type

Recent questions about devices THERMADOR