Motion 1 - Gaming-Stuhl COOLER MASTER - Kostenlose Bedienungsanleitung

Produkttyp	Gaming-Stuhl
Marke	Cooler Master
Modell	Motion 1
Kategorie	Haptischer Gaming-Stuhl
Stromversorgung	120 VAC, 50/60 Hz, 3 A / 230 VAC, 50/60 Hz, 2 A
Maximale Belastung	120 kg (265 lbs)
Hauptfunktionen	Haptischer Motor, Sitzhöhenverstellung, Rückenlehnenverstellung (90°-120°), magnetische Kopf- und Lendenstütze, höhenverstellbare Armlehnen, Feststellbremsen an Rollen
Sitzhöhenverstellung	Drehen des Sitzkissens (E) im Uhrzeigersinn/gegen den Uhrzeigersinn, Fixierung mit Schraube (H)
Rückenlehnenverstellung	90° bis 120° Neigung
Armlehnenverstellung	Höhenverstellung über Auslöser seitlich, stufenlos
Zubehör	Kopfstütze und Lendenkissen magnetisch befestigt
Software	MasterPlus (inkl. D-BOX MotionCore), Download über https://masterplus.coolermaster.com
Kabellänge	ca. 2 m (Netz) und 1,5 m (USB, geschätzt)
Gewicht	ca. 25 kg (geschätzt)
Abmessungen (ca.)	Breite: 65 cm, Tiefe: 70 cm, Höhe: 110-130 cm (geschätzt)
Material	Kunststoff, Metall, Polsterung (PU-Leder, geschätzt)
Besonderheiten	Haptischer Feedback-Motor, Kabelmanagement-Haken, Rollen mit Feststellfunktion
Lieferumfang	Motion-Modul (A), Sitzkissen (E), Rückenlehne (D), Kopfstütze (F), Lendenkissen (G), Montageschrauben (I), Inbusschlüssel (J, K), Netzteil (B), USB-Kabel (C), Bedienungsanleitung
Montage	Zweite Person empfohlen; Schritt-für-Schritt-Anleitung in der Bedienungsanleitung
Reinigung	Mit weichem, feuchtem Tuch abwischen; keine aggressiven Reinigungsmittel verwenden
Sicherheitshinweise	Nicht für Kinder; Gerät nicht in feuchter, nasser oder explosionsgefährdeter Umgebung betreiben; Netzstecker ziehen bei Nichtgebrauch; maximale Belastung beachten
Garantie	2 Jahre (typisch für Cooler Master; genaue Angaben siehe Verkaufsstelle)

Häufig gestellte Fragen - Motion 1 COOLER MASTER

Wie installiere ich die Software für den Cooler Master Motion 1?

Welches Gewicht kann der Motion 1 maximal tragen?

Wie stelle ich die Sitzhöhe ein?

Kann ich die Rückenlehne neigen?

Wie befestige ich Kopf- und Lendenkissen?

Welche Stromversorgung benötigt der Motion 1?

Ist der Stuhl für Kinder geeignet?

Wie reinige ich den Gaming-Stuhl?

Was ist im Lieferumfang enthalten?

Wie schalte ich die haptische Funktion ein?

BEDIENUNGSANLEITUNG Motion 1 COOLER MASTER

Make It Yours.

MOTION 1

Cooler Master Haptic Gaming Chair

[Non-Text]

Thank you for choosing the Motion 1.

To maximize your experience with the Motion 1,

Please read this instruction manual carefully

and familiarize yourself with the haptic engine chair before your first ride.

感謝您購買Motion 1超體感電競椅

提醒您組裝前請先仔細閱讀安裝說明書及注意事項。

STEP1 體感椅安裝影片

ASSEMBLY

VIDEO

STEP2軟體安裝說明

SOFTWARE

INSTALLATION

Download Software Manual

下载使用說明書

Check Connection

确保装置正确连接

Download The Software

Software 下載操作軟體

Follow The Software

Guide Set Up 参照使用說明書進行設定

CAUTIONS

PLEASE check on the product label that this product is suitable to use with the

voltage supplied in your country. This product contains electronics and high voltage power components. Do not disclose, place, or operate this

voltage power components. Do not disclose, place, or operate this product in an environment that contains flammable or explosive gas,

smoke as well as wet or hot environments. We highly recommend to

study the product safety information carefully

請注意插座電壓是否符合Motion 1產品上的電壓標示。

Model: MOTION Power Input:

120 VAC, 50/60Hz, 3A

230 VAC, 50/60Hz, 2A

CEPC

CB

CD

BoHS

, Roms

ATTENTIONS

注意事項

Help from another individual will make the installation process faster and easier.

建議兩人以上合作進行安裝，將使流程更為快速容易

Motion 1 is Not Designed for Children.

To avoid accidents and injury, children must be under constant supervision by adults

when using Motion1

Motion 1並非設計給兒童使用，為了避免意外與任何傷害。

Study this whole instruction manual

before you get started.

使用前请完整详细使用说明者。

Max. Weight Load: 120kg (265lbs)

最大载重量: 120公斤 (265磅)

Line drawing of a robotic device with rotating arm and base (no text or symbols)

Put (A) on a flat surface. Align and carefully turn (E) onto the male post of (A). Turn (E) clockwise till (E) is secured on the seat post. Do not turn (E) to the very bottom of the male post. Make sure you leave enough space for installing (D) on the next step.

將坐墊(E)順時針轉入Motion 模組(A)上，請先不要轉至最底部以保留足夠距離安裝椅背(D)。

Spin the secondary knob to move it close to the primary knob. Use (K) to tighten (H) into the seat post. Grab the secondary knob and spin until it hits and pushes against the seat post.

使用六角板手(K)將固定旋鈕(H)頒入金屬坐管中，並轉動次旋鈕直到碰觸坐管。

Technical diagram showing mechanical assembly with no visible text or symbols

Mount (D) onto the seat's recliner. Use (J) to simultaneously tighten all screws in place while checking (D) is orientated and aligned with (E). If there is not enough room for (J) to work around, simply turn (E) counter-clockwise. Make sure (E) is still secured on the seat post and you have enough space to tighten those screws. Be careful not to turn (E) until it comes off from the seat post. This could potentially cause serious injury and damage.

使用六角板手(J) & M8螺絲(I)把椅背(D)組裝至坐墊(E)上。

Connect (B) and (C) to (A). Wrap both cables a few rounds on the rear-mounted cable hook. Connect (B) to your AC power socket and (C) to your computer. Check to ensure all connections and cables are secured. Press the power button to turn on (A), then continue to https://masterplus.coolermaster.com as the installation process includes D-BOX MotionCore software. Once installation is complete, all software features are ready to use.

將電源線(B)及USB線材(C)接入Motion模組(A)上，同時將(B)及(C)另一頭分別接入插座和PC上，並善用模組後方的理線設計來整理線材，按壓電源按鈕來啟動Motion。

MasterPlus 軟體下載: https://masterplus.coolermaster.com

There is a lock function on the caster wheels which you can use when experiencing the Motion 1.

體驗Motion 1時建議您將輪子固定住。

To adjust the height of armrest, simply use the trigger on both sides of armrest to lock/unlock the height adjustment

扶手可以依據喜好調整高低。

The seat height can be adjusted. Turn (E) clockwise or counter-clockwise to adjust the height. When you finish the adjustment, make sure (E) faces towards the front and (H) is used to prevent (E) from rotating and rocking.

坐墊高低可以依據喜好做調整。當您調整完畢後請記得將固定旋鈕(H)鎖入坐墊底部金屬坐管中。

Line drawing of a modern office chair with seat and armrest (no text or symbols)

Backrest adjustment (90°\~120°)

椅背後仰角度調整(90°\~120°)

Line drawing of a car seat with labeled buttons and seat number 9 (no text or symbols on the chair itself)

(F) and (G) use magnets to secure them in place. Place them on the backrest wherever you feel the most comfortable.

頭枕與腰靠是磁吸式的，可以依據個人喜好調整。

A row of parallel gray diagonal stripes with white gaps, no text or symbols present.