BAT-100 - Ladegerät Amprobe - Kostenlose Bedienungsanleitung

Produkttyp	Batterietester
Marke	Amprobe
Modell	BAT-100
Testbare Batterietypen	D, C, AA, AAA, 6F22 (9V-Block), 1,5V-Knopfzellen
Anzeige	Farbcodierte Skala mit „Good“, „Low“ und „Replace/Recharge“
Stromversorgung	Keine Batterie erforderlich, wird durch die zu testende Batterie aktiviert
Kompatibilität	Standard- und wiederaufladbare Batterien
Sicherheitshinweise	Nicht in explosionsgefährdeten Bereichen verwenden; Testzeit kurz halten
Lieferumfang	BAT-100 Batterietester, Bedienungsanleitung
Garantie	1 Jahr
Zertifizierungen	CE, entspricht australischen Normen
Entsorgung	Nicht als unsortierten Hausmüll entsorgen, an einen qualifizierten Recycler wenden
Reinigung	Mit einem trockenen Tuch reinigen

Häufig gestellte Fragen - BAT-100 Amprobe

Welche Batterietypen kann ich mit dem Amprobe BAT-100 testen?

Benötigt der BAT-100 eine eigene Batterie?

Was bedeuten die Farben auf der Anzeige?

Kann ich wiederaufladbare Batterien testen?

Wie lange sollte der Test dauern?

Was ist im Lieferumfang enthalten?

Wie reinige ich den BAT-100?

Gilt eine Garantie für den BAT-100?

Wie entsorge ich den BAT-100?

Wo finde ich die Bedienungsanleitung?

BEDIENUNGSANLEITUNG BAT-100 Amprobe

AMPROBE®

BAT-100

Battery Tester

1) Battery condition meter

2) Battery terminal contactor caliper

3) 9V battery terminal contactor

SYMBOLS

	Caution ! Refer to the explanation in this Manual
	Conforms to relevant Australian standards
CE	Complies with European Directives
	Do not dispose of this product as unsorted municipal waste. Contact a qualified recycler for disposal.

⚠ WARNING and PRECAUTIONS

• Do not operate this instrument in the presence of gasoline, natural gas, propane, or in other combustible atmospheres.
• The battery tester is activated by the battery being checked. Keep test time as short as possible, to avoid unnecessary battery drain.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 BAT-100 Battery Tester

1 Users Manual

If any of the items are damaged or missing, return the complete package to the place of purchase for an exchange.

INTRODUCTION

Check the batteries! Battery failure is often the common cause for the sensor or instrument failure. Simple to use! Portable universal battery tester for the standard and rechargeable types batteries.

Features

• No battery required.
• Tests D, C, AA, AAA, 6F22 batteries and 1.5V button cells.
• Easy-to-read color-coded display with "Good", "Low" and "Replace/Recharge" indicators
• Works with standard and rechargeable Batteries

OPERATION

Refer to the following pictures for operation

9V Battery

1.5V Battery

1.5V button cells

Limited Warranty and Limitation of Liability Your Amprobe product will be free from defects in material and workmanship for 1 year from the date of purchase. This warranty does not cover disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Amprobe's warranty obligation is limited, at Amprobe's option, to refund of the purchase price, free of charge repair, or replacement of a defective product. To obtain service during the warranty period, return the product with proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe dealer or distributor. This warranty is your only remedy. All other warranties - whether express, implied or statutory - including implied warranties of fitness for a particular purpose or merchantability, are hereby excluded. Neither Amprobe nor its parent company or affiliates shall be liable for any special, indirect, incidental or consequential damages or losses, arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should be accompanied by the following: your name, company's name, address, telephone number, and proof of purchase. Additionally, please include a brief description of the problem or the service requested and include the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the form of a check, a money order, credit card with expiration date, or a purchase order made payable to Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During the warranty period any defective test tool can be returned to your Amprobe® Test Tools distributor for an exchange for the same or like product. Please check the "Where to Buy" section on www.amprobe.com for a list

of distributors near you. Additionally, in the United States and Canada In-Warranty repair and replacement units can also be sent to a Amprobe® Test Tools Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for current repair and replacement rates.

In USA

Amprobe Test Tools

Everett, WA 98203

Tel: 877-AMPROBE (267-7623)

In Canada

Amprobe Test Tools

Mississauga, ON L4Z 1X9

Tel: [phone]

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe® Test Tools distributor for a nominal charge. Please check the "Where to Buy" section on www.amprobe.com for a list of distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe In den Engematten 14

79286 Glottertal, Germany

Tel.: [phone] - 0

*(Correspondence only – no repair or replacement available from this address. European customers please contact your distributor.)