C4485 - Montre-bracelet Candino - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts C4485 Candino als PDF.
Benutzerfragen zu C4485 Candino
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Montre-bracelet kostenlos im PDF-Format! Finden Sie Ihr Handbuch C4485 - Candino und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. C4485 von der Marke Candino.
BEDIENUNGSANLEITUNG C4485 Candino
ICM7004P
USER'S MANUAL
CANDINO
SWISS WATCH
INFORMATION & REFERENCES HAND SETTING PROCEDURE
text_image
23 THU WED TUE MON 60 45 15 30 1 2 3Case case drawings
Dial, date window and day indicator drawings
Hand fitting heights & specifications for hands hand fitting height drawings
1. DAY INDICATOR
[no quick mode is available for the adjustment of the day indicator]
- Prior to the removal of the day indicator working-hand it is important to remember the day, indicated on the movement. (example: TUE = Tuesday).
MON TLE WED THU FRI SAT SUN 1 2 3 4 5 6 7 ◯◯◯◯
• After the dial setting, the day indicator-hand must be set, pointing to same day (example: TUE = Tuesday).
Is is also possible to proceed as follows:
- Prior to the removal of the day indicator working-hand and prior to the placement of the dial, the crown must be turned clockwise (stem position 3) until the day indicator working-hand jumps back into the left position
• After the dial-setting, the day indicator-hand must be set, pointing to MON.
HAND SETTING PROCEDURE
2. HOUR AND MINUTE HAND
- Stem position 2 (quick mode): The date must be set to 02 by turning the crown anti clockwise.
- Stem position 3: Turn the crown clockwise until the date changes from 02 to 03.
- Set the hands to 12.00 h
text_image
23 THU TUE MON 60 45 15 30 1 2 3CALENDAR CHANGING PHASES
Date: 1½ - 2 hours. Day of week: ¾ - 2 hours (after the date change)
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.
natural_image
Pure black background with a white horizontal line at the bottom (no text or symbols)FESTINA-CANDINO WATCH LTD
2501 Bienne Switzerland
a company of the Festina Group
www.candino.com
