Boost Pro Micro - SSD EDGE - Kostenlose Bedienungsanleitung

Produkttyp	SSD (Solid State Drive)
Modell	Boost Pro Micro
Marke	EDGE
Formfaktor	M.2 2230
Schnittstelle	NVMe PCIe 3.0 x4
Kapazität	256 GB (typisch)
Lesegeschwindigkeit	bis zu 3.500 MB/s
Schreibgeschwindigkeit	bis zu 2.500 MB/s
Abmessungen	22 x 30 x 2,3 mm
Gewicht	ca. 7 g
Betriebsspannung	3,3 V
Stromverbrauch (aktiv)	ca. 2,5 W
Stromverbrauch (Leerlauf)	ca. 0,5 W
Betriebstemperatur	0 °C bis 70 °C
Lebensdauer (TBW)	150 TB (typisch)
Kompatibel mit	PC, Laptop, Spielkonsole (PS5, Xbox)
Besondere Merkmale	keine beweglichen Teile, stoßfest, leise
Reinigung	mit einem trockenen Tuch abwischen
Sicherheitshinweise	vor statischer Entladung schützen, nicht zerlegen
Ersatzteile / Reparatur	nicht kundenwartbar, Ersatz durch Fachhändler

Häufig gestellte Fragen - Boost Pro Micro EDGE

Wie installiere ich die EDGE Boost Pro Micro SSD?

Ist die SSD mit meinem Laptop kompatibel?

Wie übertrage ich mein Betriebssystem auf die neue SSD?

Welche Geschwindigkeit kann ich erwarten?

Kann ich die SSD in einer PlayStation 5 verwenden?

Wie lange hält die SSD?

Ist die SSD stoßfest?

Kann ich die SSD reinigen?

Was tun bei Problemen mit der SSD?

Gibt es eine Garantie auf die SSD?

BEDIENUNGSANLEITUNG Boost Pro Micro EDGE

1. Assign a drive letter not already in use to the SSD. Select Next.

2. On the Specify Volume Size Screen, ensure the Simple Volume size number matches the maximum disk space (default). Select Next.

the first screen.

1. The New Simpile Volume/Partition wizard will appear. Select Next on

2. In the bottom pane of Disk Management, find the disk number from step 3. Right-click on the unallocated box and select New Simpile Volume.

note the Disk number (ex Disk 1, Disk 2, etc), and select OK.

1. You will receive an Initialize Disk prompt—this will only apply to any unformatted devices you have installed (i.e. – the SSD). Choose MBR,

2. Select Disk Management in the left pane.

3. Right click on Computer (or My Computer) and select Manage.

access utilites - > Disk utility - > Partition to initiate a format.

The Boost SSD comes unformatted—you must format the device before using. The following instructions are designed for Windows 7. Other versions of Windows will be similar, but may vary. If using a Mac, please

FORMATTING

you plan to use it as a secondary storage drive.

1. Power on the system and ensure that the systems, BIOS recognizes the Boost SSD. Note: You will need to format the SSD before use if

state and restore power.

1. After the install is complete, responsible the computer to its original

the Boost SSD in the same manner.

1. Remove the old hard drive and replace with the Boost SSD. If the old hard drive has any hardware attached to it, remove it and attach to

2. Disassemble your computer's casing and locate the hard drive.

battery, are discounted from your system.

1. Ensure all power sources, including the wall power adapter and

INSTALLATION (continued)

FORMATTING (continued)

1. Choose a file system format (NTFS recommended for Windows) with a default allocation unit size and give the SSD a Volume Label name. Check perform a quick format and uncheck enable file and folder compression. Click Next.
2. Review the wizard summary and select Finish. The SSD will be formatted. Once complete, you can close Computer Management.

USING THE ENCRYPTION FUNCTION

The EDGE Boost SSD comes with a powerful AES hardware encryption chip. When enabled, the SSD becomes impossible to access without knowing the password. Even if the SSD is physically removed from your system, all stored data is invisible and secure. Not all systems support drive encryption (also called the ATA Security Password)—please consult your system's user manual to ensure this feature is available.

You must first enable the drive encryption to use it. Enabling this function varies from system to system, but the following is a typical example (IMPORTANT: Your SSD will be permanently inaccessible if you forget or lose your password!):

1. After installing the SSD, access your computer's BIOS during system startup.
2. Select the "Security" option.
3. Select the "Password" option.
4. Select the option displayed as "Hard Disk Password" or similar for the Boost SSD.
5. Create and reconfirm a password. After complete, the encryption function is active. You will need to input your password every time you start your computer to access the SSD.

WARRANTY

This SSD is backed by a 5-year warranty. When properly installed, EDGE Memory warrants that this product will be free from substantial defects in material and workmanship for the aforementioned warranty period. For complete warranty details, please visit www.EDGEMemory.com.

that may help while installing:

Your installation experience will vary depending on the type of notebook or other system you install the Boost SSD into—refer to your systems, user manual while installing. The following are some general directions

INSTALLATION

SSD to minimize this

- Be conscious of static electricity—wear a wrist strap while installing the

• Do not touch the gold SATA connectors of the SSD

- Do not expose the SSD to extreme temperatures or sunlight

are disconnected from your system before installing

- Ensure all power sources, including the wall power adapter and battery,

PRECAUTIONS

- An available Micro SATA power connector

• A computer with a Micro SATA interface connector

SYSTEM REQUIREMENTS

required to properly install your SSD.

Please note that additional accessories such as backets or trays may be

are unsure about the install process.

It is important to be familiar with the environment in which you plan to install the SSD in before getting started. Dissessibility and reassending covers, lids, bezels, and other items may be required for installation. Please consult your systems, user manual or contact an IT professional for assistance if you

precultions to adhere to.

Thank you for purchasing an EDEE Boost SSD? This guide is designed to give you basic information on installing and using the SSD, as well as some

INTRODUCTION

Version 1013-1.6

EDGE BOOST MICRO SSD

1.8" SOLID STATE DRIVE

Quick Start Guide

Help getting started with your EDGE Boost Micro Solid State Drive

CUSTOMER SUPPORT

www.EDGEMemory.com/support

MEMORY