VS218PZD - El-tavle HAGER - Gratis brugsanvisning og manual
Find enhedens vejledning gratis VS218PZD HAGER i PDF-format.
Brugerspørgsmål om VS218PZD HAGER
0 spørgsmål om dette apparat. Besvar dem du kender, eller stil dit eget.
Stil et nyt spørgsmål om dette apparat
Download vejledningen til din El-tavle i PDF-format gratis! Find din vejledning VS218PZD - HAGER og tag din elektroniske enhed tilbage i hånden. På denne side er alle dokumenter nødvendige for brugen af din enhed offentliggjort. VS218PZD af mærket HAGER.
BRUGSANVISNING VS218PZD HAGER

natural_image
Exterior view of a white open electrical enclosure with ventilation grilles (no text or symbols visible)VS218PZD
Small distributor,golf,surface,MM,2row,36M,white door,slotted
Technical characteristics
Architecture
Fixing mode surface-mounting
Functions
With a pipe-in lead Yes
Configuration
Number of modules 36
Dimensions
Depth of wall niche 72 mm
Depth of installed product 99 mm
Internal depth 99 mm
Height of installed product 377 mm
Width of installed product 390 mm
Width in division units 18
Thickness of sidewall material
3 mm
Cover, door
| Type of door closing | Latch | |
| Identification od protection index | 40 | |
| Interlockable | No | |
| Number of keylock of the door | 0 | |
| Cover type | With Notch | |
| Door locking | without | |
| Door leave | single | |
| Cover type | Door | |
| Transparent cover or door | No |
Materials
| Colour | pure white |
| Colour | white |
| RAL colour | RAL 9010 - Pure white |
| Material | plastic |
| Type of surface treatment | untreated |
Installation, mounting
Suitable for outdoor use No
Settings
Enclosure type Distributor empty cabinet
Equipment
| Number of units 18 |
| Number of rows 2 |
| Quantity of rails 2 |
| Can be accessorized Yes |
| Number of openings for flange plates 0 |
| Extension possible Yes |
| Earthing terminal block No |
| Neutral terminal block No |
| Signal passing door Yes |
Standards
| GWT Glow wire test | 650 °C |
| European directive WEEE | not concerned |
Safety
| IK protection code against mechanical impacts | IK07 |