London 1-1852D - Klocka Jacques Lemans - Gratis bruksanvisning och manual
Hitta enhetens manual gratis London 1-1852D Jacques Lemans i PDF-format.
Användarfrågor om London 1-1852D Jacques Lemans
0 fråga om denna apparat. Svara på dem du kan eller ställ din egen.
Ställ en ny fråga om denna apparat
Ladda ner instruktionerna för din Klocka i PDF-format gratis! Hitta din manual London 1-1852D - Jacques Lemans och ta tillbaka ditt elektroniska enhet i hand. På denna sida publiceras alla dokument som behövs för att använda din enhet. London 1-1852D av märket Jacques Lemans.
BRUKSANVISNING London 1-1852D Jacques Lemans
JACQUES LEMANS
INSTRUCTION MANUAL FOR JACQUES LEMANS 3-HAND WATCH WITH DATE
BATTERY:
INSTRUCTION MANUAL

*Date position may be located at different position depends on models.
B) SETTING THE TIME
-
Pull the crown out to the 2nd position.
-
Turn the crown to set hour and minute hands.
-
When the crown is pushed back to the normal position, second hand begins to run.
C) SETTING THE DATE
-
Pull the crown out to the 1st position.
-
Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change the following day.
- After the date has been set, push the crown back to the normal position.
JACQUES LEMANS
BEDIENUNGSANLEITUNG JACQUES LEMANS 3-ZEIGER UHR MIT DATUM
BATTERIE
BEDIENUNGSANLEITUNG
A) ANZEIGE

* Abhängig vom jeweiligen Modell kann die Position des Datumfensters variieren.
B) ZEIT EINSTELLEN
- Ziehen Sie die Krone in die 1.Position.
- Drehen Sie die Krone um die Zeit einzustellen.
- Wenn die Krone in die Ausgangsstellung zurückgedrückt wird, beginnt der Sekundenzeiger zu laufen.
C) DATUM EINSTELLEN
- Ziehen Sie die Krone in Position 2.
- Drehen Sie die Krone gegen den Uhrzeigersinn um das Datum einzustellen*.
* Vermeiden Sie eine Datumseinstellung zwischen 21.00 und 04.00, da es dadurch vorkommen kann, dass das Datum am nächsten Tag nicht weiterschaltet. - Drücken Sie die Krone in die Ausgangsposition zurück, nachdem sie die Datumseinstellungen vorgenommen haben.