4Knob Rain - Oprogramowanie audio STEINBERG - Bezpłatna instrukcja obsługi
Znajdź bezpłatnie instrukcję urządzenia 4Knob Rain STEINBERG w formacie PDF.
Pytania użytkowników dotyczące 4Knob Rain STEINBERG
0 pytanie dotyczące tego urządzenia. Odpowiedz na te, które znasz, lub zadaj własne.
Zadaj nowe pytanie dotyczące tego urządzenia
Pobierz instrukcję dla swojego Oprogramowanie audio w formacie PDF za darmo! Znajdź swoją instrukcję 4Knob Rain - STEINBERG i weź swoje urządzenie elektroniczne z powrotem w ręce. Na tej stronie opublikowane są wszystkie dokumenty niezbędne do korzystania z urządzenia. 4Knob Rain marki STEINBERG.
INSTRUKCJA OBSŁUGI 4Knob Rain STEINBERG
4Knob Rain Manual
The 4Knob Rain is the third release of SampleTekk's new and approved approach to sampled pianos. Its four sounds and 88 presets provide you with a fast way of getting the sound you want for your production. The four sounds and all presets in 4Knob Rain are produced by SampleTekk's Grammy winner and several times Grammy nominee, Niklas Flyckt. During production several exclusive, vintage and very sought-after hardware was used, such as:
- Fairman TMEQ
- RCA BA-25A
- MXR Doubler
- Roland Dimension D
For the Reverb channel HALion's built in REVerence is used, but with SampleTekk's custom made impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some of the impulses consists of a combination of several reverb types.
The Interface
text_image
SAMPLETEKK 4KNOB Rain DIRECT ATTITUDE MODULATION REVERB EXTENDED M S M S M S M SThe four main controls are where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don't use a particular sound, rather than just pulling down the volume to zero, press the mute-button.
• Direct - The original piano signal
- Attitude
- Modulation
- Reverb
This is what you will see if you click the "Extended" button in the upper right corner of the control panel:
text_image
SAMPLETEKK 4KNOB Rain Extra HB VOL PEDAL VOL SENSITIVITY Space PRE DELAY SIZE TIME AMBIENCE Extended RFrom left to right:
- HB Volume – sets the volume of the hammerback sound (this is when the mechanics on the piano return after releasing a key)
- Pedal Volume – sets the volume of the sustain pedal being pressed and released
- Sensitivity – turn clockwise to emphasises the higher velocities, counterclockwise for a more mellow playing. This control is neutral when in 12 o'clock position
• Pre Delay — sets the pre delay of the reverb channel
• Size — sets the size of the reverb
• Time – sets the time of the reverb
• Ambience — sets the amount of room acoustic - R — Turn on or off the Repedaling function. With this on, you can repeat sustain notes by pressing down the sustain pedal directly after you have released it. In some occasions, you might want to turn this off for a tighter sound
