HEP-480-48 - Niekategoryzowane Mean Well - Bezpłatna instrukcja obsługi
Znajdź bezpłatnie instrukcję urządzenia HEP-480-48 Mean Well w formacie PDF.
| Typ produktu | Zasilacz LED (przetwornica AC/DC) |
| Model | HEP-480-48 |
| Marka | Mean Well |
| Napięcie wejściowe | 90–264 VAC (przełącznik uniwersalny) |
| Napięcie wyjściowe | 48 VDC |
| Prąd wyjściowy | 10 A (maks.) |
| Moc wyjściowa | 480 W |
| Sprawność | Do 93% (przy pełnym obciążeniu) |
| Zabezpieczenia | Przed przeciążeniem, zwarciem, przepięciem, przegrzaniem |
| Temperatura pracy | Od –30°C do +70°C (obniżenie mocy powyżej 50°C) |
| Chłodzenie | Bezwentylatorowe (konwekcja naturalna) |
| Stopień ochrony | IP67 (pyłoszczelny i wodoodporny) |
| Obudowa | Aluminiowa, montaż naścienny lub na szynie DIN (opcjonalnie) |
| Wymiary (dł. x szer. x wys.) | 261 x 125 x 43,5 mm |
| Waga netto | Ok. 1,2 kg |
| Certyfikaty | CE, UL, RoHS, IP67 |
| Gwarancja | 5 lat |
| Zastosowanie | Oświetlenie LED, systemy automatyki, urządzenia przemysłowe |
| Funkcja PFC | Aktywna korekcja współczynnika mocy (PF >0,95) |
| Współczynnik mocy (PF) | >0,95 przy pełnym obciążeniu |
| Prąd upływu | <0,75 mA przy 277 VAC |
Często zadawane pytania - HEP-480-48 Mean Well
Pytania użytkowników dotyczące HEP-480-48 Mean Well
0 pytanie dotyczące tego urządzenia. Odpowiedz na te, które znasz, lub zadaj własne.
Zadaj nowe pytanie dotyczące tego urządzenia
Pobierz instrukcję dla swojego Niekategoryzowane w formacie PDF za darmo! Znajdź swoją instrukcję HEP-480-48 - Mean Well i weź swoje urządzenie elektroniczne z powrotem w ręce. Na tej stronie opublikowane są wszystkie dokumenty niezbędne do korzystania z urządzenia. HEP-480-48 marki Mean Well.
INSTRUKCJA OBSŁUGI HEP-480-48 Mean Well
● Type : Enclosed Type Switching Power Supply
(Families: G3, NE, LRS, SE, PFC, HSP, SPV, USP, RST, G5, MSP)
- Introduction
Enclosed type switching power supplies possess a metal or plastic case for covering their internal PCB and will be installed inside the case of the end system. Mean Well's enclosed type power supplies include 2 different groups of power supplies, with built-in fan and without built-in fan, depending on their rated power or design concept.
- Installation
(1) Before any installation or maintenance work, please disconnect your system from the utility. Ensure that it can't be re-connected inadvertently!
(2) Keep enough insulation distance between mounting screws and internal components of power supplies. Please refer to case drawing on specifications to receive the maximum length of mounting screw.
(3) Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current. Please refer to the specification sheets to receive the optimum mounting position and information about the de-rating curve.
(4) Fans and ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.
( 5 ) Input and Output terminal
| Series\Terminal Screw | Screw Size | Suggested Torque |
| RSP-750 / 1000 / 1500 / 2000 / 2400 / 3000SE-450 / 1000 / 1500HEP-600 , HRP-300 , HRPG-300 , MSP-300SP-480 , SP-750 , SPV-1500 , USP-500 , RST-10000 | M4 | 10-12kgf-cm |
| HRP-075 / 100 / 150 / 200 , HRPG-150 / 200LRS-035 / 050 / 075 / 100 / 150 / 150F / 200 / 350MSP-100 / 200NED-035 / 050 / 075 / 100 , NET-035 / 050 / 075NES-025 / 035 / 050 / 075 / 100 / 150 / 200 / 350QP-200 / 320 / 375RD-050 / 065 / 085 / 125 , RID-050 / 065 / 085 / 125RS-035 / 050 / 075 / 100 / 150RSP-075 / 100 / 150 / 200 / 320SP-075 / 100 / 150 / 200 / 240 / 320 , SPV-150/300SE-100 / 200 / 350 , HSP-250 , PSP-600 | M3.5 | 8-10 kgf-cm |
| RSP-1600RD-035 , RT-050 / 065 / 085 / 125RQ-050 / 065 / 085 / 125TP-075 / 100 / 150 , QP-100 / 150RS-015 / 025NES-015 , USP-150 | M3 | 6-8 kgf-cm |
| ERP-350HDP-190 / 240NEL-200 / 300 | #6 | 8-10 kgf-cm |
Installation Manual
| Series\Terminal Screw | Input | Output | ||
| Screw Size | Suggested Torque | Screw Size | Suggested Torque | |
| HRP-450 / 600HRPG-450 / 600MSP-450 / 600SE-600 | M3 | 6-8kgf-cm | M4 | 10-12kgf-cm |
| HSP-150 / 200 /300HSN-200 / 300 | M3 | 6-8kgf-cm | M3.5 | 8-10kgf-cm |
| RSP-500 | M3.5 | 8-10kgf-cm | ||
| RST-5000 | M4 | 10-12kgf-cm M8 10-12kgf-cm | ||
| NEL-400 | #6 | 8-10kgf-cm | ||
(6) Recommended wires are shown as below.
| AWG | 18 | 16 | 14 | 12 | ||
| Rated Current of Equipment (Amp) | 6A | 6-10A | 10-16A | 16-25A | 25-32A | 32-40A |
| Cross-section of Lead( mm^2 ) | 0.75 | 1.00 | 1.5 | 2.5 | 4 | 6 |
| Note: Current each wire carries should be de-rated to 80% of the current suggested above when using 5 or more wires connected to the unit. | ||||||
10
Make sure that all strands of each stranded wire enter the terminal connection and the screw terminals are securely fixed to prevent poor contact.
(7) For other information about the products, please refer to www.meanwell.com for details.
● Warning / Caution !!
(1) Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not remove the case of the power supply by yourself!
(2) Please do not install power supplies in places with high moisture or near the water.
(3) Please do not install power supplies in places with high ambient temperature or near fire source. The maximum ambient temperature please refer to their specifications.
(4) Output current and output wattage must not exceed the rated values on specifications.
(5) The ground(FG) must be connected to earth ground.
(6) All MW's PSUs are designed in accordance with EMC regulations and the related test reports are available by request. Since they are belong to component power supplies and will be installed inside system enclosure, when they are integrated into a system, the EMC characteristics of the end system must be re-verified again.
Manufacturer :
MEAN WELL ENTERPRISES Co., LTD.
No.28, Wuquan 3rd Rd., Wugu Dist.,
New Taipei City 24891, Taiwan
Tel: +886-2-2299-6100
Web: www.meanwell.com
Branch Office :
China
MEAN WELL (GUANGZHOU)
ENTERPRISES Co., LTD.
2F, A Building, Yuean Industry Park,
Huangcun, Dongpu Yown, Tianhe
District, Gungzhou, China
Post Code:510660
Tel: +86-20-2887-1200
Web: www.meanwell.com.cn
U.S.A.
MEAN WELL USA, INC.
44030 Fremont Blvd., Fremont,
CA 94538, U.S.A.
Tel: +1-510-683-8886
Web: www.meanwellusa.com
Europe
MEAN WELL EUROPE B.V.
Langs de Werf 8, 1185XT
Amstelveen, The Netherlands
Tel: +31-20-758-6000
Web: www.meanwell.eu
Declaration of China RoHS Conformity
In order to reduce the impacts on the environment and take the more responsibility for protecting the earth, MEAN WELL is confirming and announcing the conformity to China RoHS, an Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.
Environment Friendly Use Period Label
 | Observing SJT 11364-2014, Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products |
| Observing SJ/Z 11388-2009, General Guidelines of Environment-friendly Use Period of Electronic Information Products Appendix B, adopting table look-up to verify the Environment Friendly Use Period |
Names and Contents of Hazardous Substances Lists
| Part Name | Hazardous Substances | |||||
| Lead(Pb) | Mercury(Hg) | Cadmium(Cd) | Hexavalent chromium( Cr^6+ ) | Polybrominated biphenyls(PBB) | Polybrominated diphenyl ethers(PBDE) | |
| PCB and its components | X | O | X | O | O | O |
| Metal structure parts | X | O | O | O | O | O |
| Plastic structure parts | O | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
| Cables | X | O | O | O | O | O |
| O: The concentration of the hazardous substances within the homogeneous material of that product is less than the concentration limits set by GB/T 26572-2011.X: The concentration of the hazardous substances within the homogeneous material of that product is over the concentration limits set by GB/T 26572-2011; however, it follows the standard advised by 2011/65/EU. | ||||||