BEKO DPU8360X - Sèche-linge

DPU8360X - Sèche-linge BEKO - Notice d'utilisation et mode d'emploi gratuit

Retrouvez gratuitement la notice de l'appareil DPU8360X BEKO au format PDF.

📄 56 pages Français FR Télécharger 💬 Question IA 9 questions ⚙️ Specs
Notice BEKO DPU8360X - page 1
Voir la notice : Français FR English EN Nederlands NL
Choisissez votre langue et indiquez votre email : nous vous enverrons une version traduite specifiquement.
Intitulé Valeur / Description
Type de produit Sèche-linge à condensation
Capacité de chargement 8 kg
Classe énergétique B
Dimensions approximatives 84,6 x 59,7 x 65,4 cm
Poids 37 kg
Alimentation électrique 220-240 V
Puissance 2 500 W
Fonctions principales Programmes variés, départ différé, séchage intelligent
Entretien et nettoyage Filtre à peluches à nettoyer régulièrement, réservoir d'eau à vider
Pièces détachées et réparabilité Disponibilité de pièces détachées, facilité d'accès pour réparations
Sécurité Système de sécurité contre la surchauffe, verrouillage enfant
Compatibilités Compatible avec des accessoires de séchage spécifiques BEKO
Informations générales Garantie de 2 ans, service après-vente disponible

FOIRE AUX QUESTIONS - DPU8360X BEKO

Que faire si mon sèche-linge BEKO DPU8360X ne démarre pas ?
Vérifiez que l'appareil est bien branché à une prise électrique fonctionnelle. Assurez-vous également que la porte est correctement fermée et que le bouton de démarrage est enfoncé.
Pourquoi mon sèche-linge BEKO DPU8360X ne chauffe-t-il pas ?
Cela peut être dû à un filtre à peluches obstrué ou à un réservoir d'eau plein. Nettoyez le filtre et videz le réservoir, puis réessayez.
Comment nettoyer le filtre à peluches de mon sèche-linge ?
Ouvrez la porte du sèche-linge et retirez le filtre à peluches. Nettoyez-le sous l'eau courante pour enlever les peluches, puis laissez-le sécher avant de le remettre en place.
Mon sèche-linge BEKO DPU8360X fait du bruit pendant le fonctionnement, que faire ?
Vérifiez si des objets étrangers se trouvent à l'intérieur du tambour. Assurez-vous également que l'appareil est de niveau et que les pieds sont correctement ajustés.
Comment régler les programmes de séchage sur mon BEKO DPU8360X ?
Utilisez le bouton de sélection des programmes pour choisir le cycle souhaité. Consultez le manuel d'utilisation pour connaître les programmes spécifiques et leurs durées.
Que faire si le réservoir d'eau est plein mais que le voyant ne s'allume pas ?
Vérifiez que le réservoir est correctement installé. Si le problème persiste, il peut y avoir une obstruction dans le système de drainage. Contactez un service après-vente pour assistance.
Puis-je utiliser mon sèche-linge BEKO DPU8360X sans ventilation externe ?
Oui, le BEKO DPU8360X est un modèle à condensation et ne nécessite pas de ventilation externe. Assurez-vous simplement que le réservoir d'eau est vidé régulièrement.
Comment puis-je économiser de l'énergie avec mon sèche-linge ?
Utilisez les programmes appropriés pour le type de tissu et la charge. Évitez de surcharger le tambour et nettoyez régulièrement le filtre à peluches.
Y a-t-il un mode d'arrêt automatique sur le BEKO DPU8360X ?
Oui, le sèche-linge est équipé d'une fonction d'arrêt automatique qui s'active lorsque le cycle de séchage est terminé.

Questions des utilisateurs sur DPU8360X BEKO

0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.

Poser une nouvelle question sur cet appareil

L'email reste privé : il sert seulement à vous prévenir si quelqu'un répond à votre question.

Aucune question pour l'instant. Soyez le premier à en poser une.

Téléchargez la notice de votre Sèche-linge au format PDF gratuitement ! Retrouvez votre notice DPU8360X - BEKO et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil DPU8360X de la marque BEKO.

MODE D'EMPLOI DPU8360X BEKO

Beko

Gelieve deze gebruikershandleiding eerst te lezen!

Geachte klant,

Wij hapen dat u de Beste resultaten verkrijgt met dit product dat in ultramoderne fabrieken is vervaardigd en dat een strikte kwaliteit'scontrolleprocedure heeft doorstaan.

Lees waarom deze volledige gebruikershandleiding aandachtig door voor het product in gebruik te nemen en houdt deze als naslagwerk voor de toekomst. Indien u het product aan een ander persoon overdraagt, dient u ook de handleiding mee te gehen.

De gebruikershandleiding zal u helpen uw product op een snelle en veilige wijze gebruiken.

  • Lees de gebruikershandleiding voor u het product installeert en in gebruik neemt.
  • Volg altijd de veiligheidsinstrcties op.
  • Bewaar deze gebruikershandleiding binnen handbereik voor toekomstig gebruik.
  • Lees ook de andere bij het product geleverde documenten.

Vergeet zich dat deze gebruikershandleiding van toepassing kan zijn op verschillende andere modellen. De verschillen:tussen de modellen worden geidentificierd in de handleiding.

Verklaring van de symbolen

In deze gebruikershandleiding worden de volgende symbolen gebruikt:

BEKO DPU8360X - Verklaring van de symbolen - 1

Lees de instructies.

BEKO DPU8360X - Verklaring van de symbolen - 2

Belangrijke informatatie of nuttige tips over het gebruik.

BEKO DPU8360X - Verklaring van de symbolen - 3

Waarschuwing voor gevaarlijke situatuies met betrekking tot leven en eigendom.

BEKO DPU8360X - Verklaring van de symbolen - 4

Waarschuwing voor elektrische schok.

BEKO DPU8360X - Verklaring van de symbolen - 5

Waarschuwing voor brandgevaar.

BEKO DPU8360X - Verklaring van de symbolen - 6

Waarschuwing voor hete oppervlakken.

BEKO DPU8360X - Verklaring van de symbolen - 7

BEKO DPU8360X - Verklaring van de symbolen - 8

Dit apparaat draagt het symbol voor gescheden inzameling van afgedankte elektrische en elektronische apparatuur. Het valt hierdoor onder de bepalingen van richtlijn 2002/96/EG die voorschrift dat het gerecycled dan wel ontmanteld要去 worden teneinde het milieu te sparen U kunt u voor nadere inlichtingen wenden tot uw gemeente.

Elektronische producten die nied gescheiden worden ingezameld vormen een potentieel gevaar voor het milieu en de volksgezondheid wegens de gevaarlijke stoffen die.Deze apparatur bevat.

Belangrijke veiligheidsinstructies

Deze sectie bevat veiligheidsinformatie die zal helpen om de risico's op persoonlijk letsel of materièle schade te beperken. Indien deze instructies Niet worden opgevolgd, vervalt de garantie.

Algemene veiligheid

  • Plaats het product nooit op een vloer die met tapijt is bekleed. Anders zal het gebrek aan luchtstroom onder de machine oververhitting van de elektrische onderdelen veroorzaken. Dit veroorzaakt problemen met uw product.
  • Gebruik de machine nicht indien de stroomkabel / stekker is beschadigd. Bel het Erkende Servicebedrijf.
    Maak geen aanpassingen aan de stekker die bij het product is geleverd. Als deze Niet compatibel is met het stopcontact, maar dan een bevoegde elektricien het stopcontact verrangen door een die geschikt is.
  • Raak de stekker nooit aan met natte handen! Trek nooit aan de kabel, maar trek aan de stekker om deze uit het stopcontact te verwijdersen.
  • Sluit het product aan op een geaard stopcontact, beveiligd door een zekering met voldoende capaciteit, zoals vermeld in de technische specificaties.
  • Het netsnoer van dit product is uitgerust met een geleider en een aardstekker waarmee het product kan worden geaard. Deze stekker要去 in een stopcontact worden gestoken dat geinstallerd en geaard is in overeenstemming met deplaatselijke wetgeving en voorschriften. De aardleiding verkleint de kans op elektrische schokken door een pad met lage waarstand voor de elektriciteitstroom te openen in het geval van een storing of defect. Zorg ervoor de installmentie van de aardleiding door een erkende elektricien worden uitgevoerd. Als u twijfels hebft over de aardaansluiting, LAST deze dan nakijken door een gekwalificeerde elektricien of het Erkende Servicebedrijf. Ons bedrijf is Niet aansprakelijk voor schades die

zijn ontstaan door het gebruik van het product zichonder aarding volgens de lokale voorschriften.

  • De stekker van het product mag tijdens de installmentie, het onderhoud, de reiniging en het reparatiewerk Niet in het stopcontact zitten.
  • Laat de installatione en reparatiehandelingen algid uitvoeren door het Erkende Servicebedrijf. De fabrikant kan Niet aansprakelijk worden gesteld voor schade die voortkomt uit handelingen die zich uitgevoerd door onbevoegde Personen.
  • Gebruik geen elektrische toestellen in het product.
  • Sluit de luchtaflaat van het product Niet aan op de rookkanalen die worden gebruikt voor de uitlaatgassen van apparaten die met gas of andere brandstoffen werken.
    Zorg voor voldoende ventilatie om te voorkomen dat de gassen die afkomstig zijn van apparaten die met andere brandstoffen werken, waaronder de open vlam, zich in de kamer ophopen vanwege naontstekingeffect.
  • Let op dat de luchtinlaatopeningen nicht geblokkeerd zijn
  • Items die,zijn gereinigd of gewassen met stookolie,chemische oplosmiddelen of ontvlambare of explosieve stoffen en items die,zijn bevlekt of verontreinigd met dergelijkke materialenlogeniet in het product worden gereinigd,aangezien ze ontvlambare of explosieve dampen afgeven.
  • Droog geen was in de wasdroger die is gereinigd met industrièle chemicalien.
  • Ondergoed met metalen verstevigers mag nicht in de wasdroger worden gedroogd. Indien deutsche metalen verstevigers losraken en afbreken tijdens het drogen kan de wasdroger beschadigd rakepen.
    Probeer nooit om het apparaat zich te repareren. Voer geen herstelling- of verwangingshandelingenuit op het product, ook al bent u in staat om deze

uit te voeren, tenzij dit duidelijk in de bedieningsinstrumenties of de handleiding staat aangegeven. Anders kut u uw leven en dat van anderen in gevaar brengen.

  • Als storingen, na het toepassen van de handelingen in de veiligheidsinstrumenties, Niet te verhelpen zijn, dient u het productuit te zetten, de stekkeruit te trekken en het Erkende Servicebedrijf te bellen.
  • Niet in de machine reiken wanner detrommel draait.
  • Gebruik geen verlengsnoeren,meerwegstekkers of adapters om de wasdroger aan te sluiten, om de kans op brand en elektrische schokken te verkleinen.
  • Reinig het product nooit door er water over te verdelen of er water over te gieten! U kunt een elektrische schok krijgen!

De LASTE fase van de droogprogramma, de afkoelfase, vindt plaats zonder toegevoegde但它 om ervoor te zorgen dat de items op een temperatuur blijven waar bij ze Niet beschadigd raken. Als u de vuldeur opent voordat de afkoelfase is voltooid, komt er hete damp out demachine.

Stop de wasdroger nooit voordat het programme voltooid is. Indien dit moodzakelijk is, dient u al het wasgoed snel te verwijderen en dit uit te leggen op een geschikteplaats om de hitte eruit te lately.

  • Reinig de plurisfilter altijd na elke lading. Bedien de wasdroger nooit als de plurisfilter nicht is geinstalleerd.
  • Reinig regelmatig de binnenkant en afvoerpijp van het product Laat verzels, stof en vuil Niet ophopen rondom de afvoer en omliggende gebieden.
  • Het netsnoer要去 goed bereikbaar zich na de installmentie.
  • Droog geen vuile voorwerpen in de wasdroger.
  • Items die zijn verruild door kookolie, aceton, alcohol, stookolie, ontvlekker, terpentijn, paraffine en paraffineverwijderaar要去en in heet water worden gewassen met een extra hoeveelheid wasmiddel voordat ze in de wasdroger worden

gedroogd.

  • Kleding of kussens gemuld met schuimrubber (latexschuim), douchekapjes, waterproof textiel, materiaal met rubberen versterking en rubberen schuimkussentjes mogen nicht in de wasdroger worden gedroogd.
  • Gebruik geen wasverzachters of antistatische producten, tenzij ze zijn aanbevolen door de fabrikant van de wasverzachter van het relevante product.
  • Gebruik wasverzachters, antistatische producten enz. in overeenstemming met de instructies van hun fabrikanten.
  • Installee het product Niet acheer een deur met een slot, een schuifdeur of een scharnierende deur die gegen het product kan slaan.
  • Installer of当场 de wasdroger Niet opplaatsen waar deze worden blootgesteld aan de buitenluchtomstandigheden.
    Uw product kan werken bij temperaturen tussen +5^ en +35^ . Indien de werkomstandigheden buiten dit bereik vallen, za de werking van het product ongunstig beinvloed worden en kan daardoor beschadigd raken.
  • Ontregel de bedieningsknuppen nicht.
  • Verwijder de stekkeruit het stopcontact wanner het product Niet in gebruik is.
  • Verwijder de vuldeur van het droogcompartment voor u het product uit bedrijf neemt of wegwerpt.
  • Controller voor het laden alle kledingstukken om er zeker van te zijn dat er zich geen aanstekers, Munten, metalen deeltjes, naalden enz. in de zakken bevinden of op deze zijn bevestigd.
  • Verzeker u ervan dat huisdieren nicht in het product kruipen. Controller er trommel van het product voordat u het in gebruik neemt.
  • Verzeker u ervan dat erijdens onderhoudswerk originele reserveonderdelen en accessoires gelebruikt worden.
    Leun Niet op de vuldeur als deze open staat. Het product kan omvallen.
  • Wonneer uw machine Niet in gebruik is of

wanner u het wasgoed na de voltooien van het droogproces uithaalt, draait u de machine uit met de Aan/Uit-knop. Als de Aan/Uit-knop op Aan staat (terwijl de machine in werkig is) houdt u de vuldeur gesloten.

Bedoeld gebruik

  • Dit product is ontworpen voor huishoudelijk gebruik. Het mag Niet voor andere doeleinden worden gebruikt.
  • Het product mag enkel worden gebruikt om textiel dat hiervoor gemarkeerd is te drogen.
  • Droog alleen de artikelen in uw product die in deze handleiding+zijn vermeld.
  • Dit product is nicht bedoeld om te worden gebruikt door Personen met lichamelijke, geestelijkke of zintuiglijke handicaps of door onervaren Personen (inclusief kinderen), tenzij ze onder toezicht staan van een persoon die verantwoordelijk is voor hun verilgheid of die hun instructies geeft over het gebruik van het product.

Veiligheid van kinderen

  • Elektrische producten zijn gevaarlijk voor kinderen. Houd de kinderen van het product wegijdens de werkking. Laat huniet met het product spelen.
  • Laat kinderen nicht in het product zitten/ klimmen.
  • Vergeet nicht de vuldeur te sluiten wanner u de kamer verlaat waar het product zich bevind.
  • Verpakkingsmaterial is gevaarlijk voor kinderen. Houd het verpakkingsmaterial buiten het bereik van kinderen of gooiet het weg volgens de afvalrichtlijnen.

2

Installatie

Neem contact op met uw dichtstbijzijnde Erkend Servicebedrijf voor installmentie van het product. Om het product gereed te makesen voor gebruik dient u zich ervan te verzekerendat de elektriciteit en het waterafvoersystemejuist+zijn voor het Erkende Servicebedrijf te bellen. Indien dit Niet het geval is, bel een erkende monteur en loodgieter om de nodige werkzaamheden te latelyuitvoeren.

i De Voorbereiding van de productlocatie, als ook de elektrische en afvoerwaterinstallaties, is de verantwoordelijkheid van de klant.
De installmentie en elektrische aansluitingen van het product dient uitgevoerd te worden door het Erkende Servicebedrijf. De fabrikant kan nicht aansprakelijk worden gesteld voor schade die voortkomt uithandelingen die zich uitgevoerd door onbevoegde Personen.
! Controller voor de installmentie visueel of het product defecten heeft. Laat het in dat geval Niet installereren. Beschadigde producten können uw verilgheid in gevaar brengen.
Laat de wasdroger 12 eer rusten voor u deze wee in gebruik neemt.

Geschikte installmentieplaats

  • Installee het product op een stabel en vlak oppervlak.
  • De wasdroger is zwaar. Verplaats hem zichniet.
  • Laat product werken in een goed geventileerde, stofvrijne omgeving.
  • Blokker de luchtafvoer vooraan en onderaan het apparaat Niet met materialen zoals tapijten met lange haren en houten blokken en strips.
  • Installee het product Niet acheer een deur met een slot, een schuifdeur of een scharnierende deur die gegen het product kan slaan.
  • Als het product eenmaal is geinstalleerd,要去 het op bezelfde plaat blijven als waar de aansluitingen zijn gemakt. Bij het installereren van het product要去 u

zich ervan verzekeren dat+zijn achechterwand niets aanraakt (kraan, contactdoos, enz.). Let er ook op dat u een installmentelocatie kiest die u Niet naderhand moet veranderen.

  • Plaats het product minstens 1,5 cm afstand van de rand van ander meubilair.
    Plaats het product Niet op de stroomkabel.

Verwijdersen van de transportbeveiliging

Voordat u het product voor de eerste koer gebruikt moet u de transportbeveiliging verwijderen.

  1. Open de vuldeur.
  2. Binnenin de trommel bevindt zich een nylon zak met een stuk piepschuim. Neem deze vast aan het deel gemarkeerd met XX XX.
  3. Trek de nylon maar u toe en verwijder de transportbeveiliging.

BEKO DPU8360X - Verwijdersen van de transportbeveiliging - 1

! Verzeker u ervan dat er geen delen van de transportbeveiliging in de trommel hinterblijven.

Installatie onder het werkblad

  • Dit product kan onder een aanrecht geinstalleerd worden als de hoogte van het aanrecht voldoende is.
    U mag de inbouwdroger nooit gebruiken zonder het inbouw installmentonderdeel.
Diepte droogautomaat60 cm54 cm
Stocknummer van installationeonderdeel onder aanrecht29797001002973600100
  • Laat, bij installmentie onder een aanrecht of in een kast, minstens een ruimte van 3 cm:tussen de zijwanden en hinterwand van het product.

Montage bovenop een wasmachine

Er moet een bevestigingsstuk worden gebruikt:tussen de twee machines wanneer de wasdroger boven een wasmachine worden geinstalleerd. Het bevestigingsstuk (2977200100 wit/2977200400 grijs ) dient geinstalleerd te worden door het Erkende Servicebedrijf.
- Het totale gewicht van de volledig gezulde en bovenop elkaar geplaatste wasmachine en de wasdroger is ongeveer 180 kilo. Plaats de producten om een vaste vloer met voldoende draagkracht!

De afvoer aansluiten

In producten, die zijn uitgerust met een condensator, worden tijdens de droogcyclus het water ophoopt en verzameld in een waterreservoir. U moet het verzamelde water na elke droogcyclus verwijderen.

U kunt het verzamelde water direct afvoeren via de waterafvoerslang die bij het product geleverd worden inplaats van het water dat in het waterreservoir worden verzameld periodiek te verwijderen.

BEKO DPU8360X - De afvoer aansluiten - 1

BEKO DPU8360X - De afvoer aansluiten - 2

Aansluiten van de waterafvoerslang

  1. Trek de slang met de hand in het product om deze los te koppelen vanwaar hij is aangesloten. Gebruik geen gereedschappen om de slang te verwijderen.
  2. Sluit eén eind van de afvoerslang, die afzonderlijk bij het product geleverd is, aan op het aansluitpunt vanwaar u de slang van het product in de vorige stap verwijderd heeft.
  3. Sluit het andere uiteinde van de afvoerslangrechtstreeks op de afvalwaterafvoer of op de wasbak aan.

! De slang dient vastgemaakt te worden in elk type aansluiting. Als de slang loskomt tijdens de afvoer van het water, zal uw huis onder water lopen.

i De waterafvoerslang moet worden bevestigd op een hoogte van maximum 80 cm.
i Verzeker u ervan dat nicht op de waterafvoerslang worden gestapt en dat deze nicht geknikt is:tussen de afvoer en de machine.

Poten afstellen

Om ervoor te zorgen dat het product stiller en zonder trillingen werk, moet deze waterpas en in evenwicht op+zijn poten staan. Zet de machine in evenwicht door de poten aan te passen.

Draai de voetenaar links of rechts tot demachine waterpas en stevig staat.

BEKO DPU8360X - Poten afstellen - 1

i Verwijder de verstelbare voetjes nooit uithun behuizing.

Elektrische verbinding

Sluit het product aan op een geaard stopcontact, beveiligd door een zekering met de waarden zoals aangegeven in de tabel met technische specificaties. Ons bedrijf is Niet aansprakelijk voor schades die zich ontstaan door het gebruik van het product zonder aarding volgens de lokale voorschriften.

  • De aansluiting moet voldoen aan de nationale reglementering.
  • Het netsnoer要去 goed bereikbaar zich na de installmentie.
  • De spanning en de toegestane zekerings-of stroomonderbrekerbescherming zich gespecifieerd in het deel "Technische specificaties". Als de stroomsterkte van de zekering of stroomonderbreker in het huis lager is dan 10 Amp,的那一enkende elektricien dan een zekering van 10 Amp installeren.
  • De aangegeven spanning要去gelijk zijn aan uw netspanning.
    Maak geen aansluitingen met verlengsnoeren of meerwegstekkers.
  • De hoofdzekering en schakelaars要去en een contactafstand hebben van minimum 3 mm.
    4 Beschadigde stroomkabels dienen verrangen te worden door het Erkende Servicebedrijf.
    Als het product defect is, mag het nicht worden gebruikt tenzij na herstelling! U kunt een elektrische schok krijgen!

Eerste gebruik

Voordat u het product in gebruik neemt diet u zich ervan te verzekeren dat alle voorbereiding gedaan zijn volgens de instructies in hoofdstuk "Belangrijke veiligheidsinstrumenties" en "Installatie".

Verpakkingsmaterialwegwerpen

Verpakkingsmaterial is gevaarlijk voor kinderen. Bewaar alle verpakkingsmaterial op een veiligeplaats buiten het bereik van kinderen.

Het verpakkingsmaterial van het product is vervaardigduitrecyclerbaarmaterial.

Werp het op de juiste manier weg en sorteer in overeenstemming met de instructies voor gerecycleerd afval. Gooi het verpakkingsmaterial Niet weg met normaal huishoudafval.

Vervoer van het product

  1. Trek de stekker uit het stopcontact voordat u het product vervoert.
  2. Verwijder de waterafvoerslang (indien van toepassing) en de pijpaansluitingen.
  3. Laat het water volledig UIT het product lopen.

We raden u aan het product rechtop te vervoeren. Indien het onmogelijk is de machine in rechtstopstaande positie te verplaatsen, moet ze op de, ten opzichte van de voorkant, rechtzerijde worden gekanteld. Nadat het product op+zijn neue plaats gezet is, dient u 12aar te wachten voor het in gebruik te nemen.

Het oude product weggooien

Verwijder uw oude product op een milieuvriendelijk wijze.

Neem contact op met uw dealer of recyclagecentrum voor meer informatie over het verwijderen van de product. Voor de veiligheid van de kinderen snijdt u, voordat u zich van het product ontdoet, de stroomkabel door en sloopt u het sluitmechanisme van de vuldeur, zodat deze onbruikbaar worden.

Waarschuwingen over geluiden

i Het is normal dat uijdens de werkingsoms metaalachtige geluidenuit de compressor waarneemt.

BEKO DPU8360X - Waarschuwingen over geluiden - 1

i Het tijdens de werkking opgevangen water wordt maar de watertank gepomp. Het is normalaal dat u tijdens dit proces pompgeluiden waarneemt.

BEKO DPU8360X - Waarschuwingen over geluiden - 2

Technische specificaties

FL

Hoogte (aanpasbaar)84,6 cm
Breedte59,5 cm
Diepte59,8 cm
Capaciteit (max.)8 kg
Gewicht (netto)49 kg
VoltageZie typeplaatje
Aangeduid gezruikt vermogen
Modelcode

Typeplaatje bevindt zich ache ter de vuldeur.

3 Voorbereidingen voor het drogen

Dingen die u=kunt doen om energia te besparen

De volgende informatie zal u helpen het product op een ecologische en energiezuinige manier te gebruiken.

  • Laat het product werken op een geschikt vermogen voor het door u gekozen programme en let erop dat u Niet teveel laadt.
  • Centrifugeer uw wasgoed op de hoogst möglichke snelheid bij het wassen. Zo worden de centrifugetijd verkort en neemt het energieverbruik af.
  • Droog hetzelfde type wasgoed samen.
  • Volg de instructies in de gebruikershandleiding voor programmaselectie.
  • Laat aan de voor- en+zijkant van de droger voldoende ruimte vrij voor luchtcirculatie. Blokker het ventilatierooster aan de voorkant van het product Niet.
  • Open de deur van de machine Nietijdens het drogen, tenzij hetoodzakelijk is. Als u de deuricht moet openen, houd deze dan Niet langdurig geopend.
    Voegijdens het drogen geen{nieuw (nat) wasgoed toe.
  • De pluizen en verzels die vrijkomen van het wasgoed in de lucht tijdens de droogbeurt, worden verzameld in de pleasifilter. Reinig de pleasiffilter voor of naiedere droogcyclus.
  • Reinig de filterlade regelmatig ofwel als het waarschuwingssymbool "reinig filterlade" verschijnt of na elke 5 droogcycli.
  • Ventileer de ruimte waar de wasdroger staat goed tijdens het drogen.
  • Voor modellen met verlichting dient de door gesloten te blijven als de Aan/Uitknop ingedrukt worden (als de machine in werkung worden gezet) wonneer de machine Niet in gebruik is.

Wasgoed dat in de machine kan worden gedroogd

Volg altijd de instructies in de kledinglabels op. Droog in deze wasdroger enkel wasgoed met een label waarop staat dat het geschikt is om te worden gedroogd in een wasdroger en zorg ervoor dat u het juiste programma selecteert.

BEKO DPU8360X - Wasgoed dat in de machine kan worden gedroogd - 1

Wasgoed dat nicht in dem machine kan worden gedroogd

  • De hieronder aangegeven was en items zichn nicht geschikt om in een wasdroger te drogen:
  • WasgoedItems met metalen delen zoals metalen knopen, metalen verstevigers of riemgespen.
  • Wollen of zichden kledingstukken, nylon kousen, fjne gebordurde stoffen en slaapzakken.
  • Kledingstukken van fijn en waardevolle stoffen.
    Vitrages.
  • Items van hermetisch afgesloten verzels, zoals kussens en dekbedden.
    Hele natte was.
  • Ongewassen, vieze was.
  • Wasgoed dat schuimrubber of rubber bevat.

Items die zich gereinigd, gewassen

of bevlekt met stookolie, chemische oplosmidden, industrielle chemicalien of andere ontvlambare of explosieve stoffen mogen nicht in de wasdroger gedroogd worden.

BEKO DPU8360X - Wasgoed dat nicht in dem machine kan worden gedroogd - 1

Items die zijn verruild door kookolie, aceton, alcohol, stookolie, ontvlekker, terpentijn, paraffine en paraffineverwijderaar要去en in heet water worden gewassen met een extra hoeveelheid wasmiddel voordat ze in de wasdroger worden gedroogd.

Wasgoed op het drogen voorbereiden

  • Controller voor het laden alle kledingstukken om er zeker van te zijn dat er zich geen aanstekers, Munten, metalen deeltjes, naalden enz. in de zakken bevinden of op deze zijn bevestigd.
  • Het wasgoed kan in de knoop zitten na het wassen. Scheid het wasgoed voor u het in de wasdroger plaatst.
    Sorteer het wasgoed volgens het type en de dikte. Droog hetzelfde type wasgoed samen. Dunne theedoeken en tafellakens zijn bijvoorbeeld erder droog dan dikke badhanddoeken.
    Wasgoed dient gecentrifugeerd te worden op de hoogste snelheid die door de wasmachine afhankelijk van het stofype is toegestaan.

BEKO DPU8360X - Wasgoed op het drogen voorbereiden - 1
Correcte laadcapaciteit

Volg de instructies in de "programmakeuzeen verbruikestabel" op. Laad Niet meer dan decapaciteitswaarden zoals vermeld in de tabel.

Het is Niet aanbevolen de wasdroger te laden met meer wasgoed dan het niveau dat in de afbeelding is aangegeven. De droogresultaten zullen verminderen wanner de machine te zwaar geladen is. Bovendien konnen de wasdroger en het wasgoed beschadigen.

De volgende gewichten worden als voorbeeld gegeven.

Huishoudelijk artikelenBenaderende gewichten (g)
Katoenen dekbedovertrekken (dubboil)1500
Katoenen dekbedovertrekken (enkel)1000
Lakens (dubboil)500
Lakens (enkel)350
Grote tafelkleden700
Kleine tafelkleden250
Servetten100
Badhanddoeken700
Handdoeken350
KledingstukkenBenaderende gewichten (g)
Bloezen150
Katoenen hemden300
Hemden200
Katoenen jurken500
Jurken350
Jeans700
Zakdoeken (10 stuks)100
T-shirts125

Het laden van het wasgoed

  1. Open de vuldeur.
  2. Plaats het wasgoed in de machine zonder het samen te drukken.
  3. Duw de vuldeur om te sluiten.

Zorg dat er niets:tussen de deur zit.

BEKO DPU8360X - Het laden van het wasgoed - 1

BEKO DPU8360X - Het laden van het wasgoed - 2

4 Een programma selecteren en uw machine bedieren

BEKO DPU8360X - Een programma selecteren en uw machine bedieren - 1
Bedieningspaneel

  1. Keuzeknop wasmachinecentrifugereersnelheid / Programmatijdschakelaar
  2. Display
  3. Starten/Pauze/Annuleren-knop
  4. Programmakeuzeknop
  5. Aan/Jit-knop
  6. Antikreukknop
  7. Droogniveauknop
  8. Audiowaarschuwing annuleerknop
  9. Knoppen voor startuitstel

BEKO DPU8360X - Een programma selecteren en uw machine bedieren - 2

BBD

BEKO DPU8360X - BBD - 1

Centrifugeersnelheid / Tijdschakelaarprogramma's*

In-bedrijfsymbool

Pauzesymbool

#

Waarschuwingssymbool waterreservoir

Waurschuwingssymbol Filter reinigen

Waarschuwingssymbol Filterlade reinigen

Indicator resterend tijd**

#

Waarschuwingssymbol kinderslot

Modusijdvertraging

Waarschuwingssymbol Vuldeur open

Antikreukmodus

(△))

Niveau Auditief alarm / Auditief alarm annuleren

#

Droogteniveau

Antikreuk geactiveerd

  • De centrifugeersenheitsword gestrukt um de resterendeijd accuater waer te geben. Dit heegt geen invo op de goede werkung van uw machine.
    ** Deijd die op het scherm worden witeregeveen is de resterendeijd tot het einde van het programme en verandert aan gelang het vochtigheidsniveau van het wasgoed.

Voorbereiden van de machine

  1. Steek de stekker van de machine in het stopcontact.
  2. Plaats het wasgoed in de machine.
  3. Druk op de Aan / Uit-knop.

Het drukken op de knop Aan / Uit betekent Nietoodzakelijkwerijze dat het programma gestart is. Druk op de knop Start / Pauze / Annuleren om het programma te starten.

Programmaselectie

  1. Zoek het geschikte programma in de onderstaande tabel die de droogniveaus aangeeft.
  2. Selecteer het gewenste programma met de programmaselectieknop.
Extra droogAlleen het katoenen wasgoed wordt op normale temperatuur gedroogd. Dik wasgoed en wasgoed bestaand uit meertere lagen (handdoeken, linnengoed, jeans, enz.) worden dusdanig gedroogd dat het Niet gestreken hoeft te worden voor het in de kast worden gelegd.
KastdroogNormaal wasgoed (tafelkleden, ondergoed, enz.) worden dusdanig gedroogd dat het wasgoed Niet gestreken hoeft te worden voor het in de kledingkast worden gelegd.
StrijkdroogNormaal wasgoed (hemden, jurken, enz.) worden strijkkaar gedroogd.

Voor meer programmadetails,zie "Programmakeuze- en verbruikstabel".

Hoofdprogramma's

Afhankelijk van het stoftype zijn de volgende hoofdprogramma's beschikbaar:

Katoen

Droog duurzaam wasgoed met dit programme. Droegt bij normale temperatuur. Het is aanbevolen voor gebruik voor uw katoenen items (zoals lakens,dekbedovertrekken, handdoeken, badjassen, enz.).

Synthetisch

Droog minder duurzaam wasgoed met dit programme. Aanbevolen voor synthetische stoffen.

Extraprogramma's

Voor bijzondere gezallen is de machineuitgerust met de volgende extra programma's

i De extra programma's kunnen verschillen afhankelijk van de functies van uw machine.

Xpress

U kurz dit programma gebruiken om katoen te drogen dat gegen hoge snelheid gecentrifugeerd is in de wasmachine. Dit programma droogt 1 kg katoenen wasgoed (3 hemden/3 t-shirts) in 45 Minutes.

Om betere resultaten te krijgen met uw droogmachine要去 het wasgoed gewassen zijn met het geschikte programma en gecentrifugeerd zijn met de aanbevolen snugheid in uw wasmachine.

- Hemden

Dit programma droogt de hemden gevoeliger en kreukt ze minder, waardoor zegemakkelijker gestreken nutzen worden.

Uw hemden konnen aan het einde van hetprogramma enigszins vochtig zich. Het is raadzaam de hemden Niet in de wasdrogerchyter te lately.

- Jeans

U kunt dit programma gebruiken om uw jeans te drogen die gegen hoge snelheid gecentrifugeerd is in de wasmachine.

Gemengd (mix)

Gebruik dit programma om nicht-gekleurde synthetische en katoenen wasgoeditems gezamenlijk te drogen.

- Sportkleding (sport)

Gebruik dit programma om de synthetische en katoenen wasgoedItems gezamenlijk te drogen met de gemengde stoffen wasgoedItems.

- Wolverzorging

U kunt deze functie gebruiken om uw wollen wasgoed, dat in de wasmachine kan worden gewassen, te ventileren en te verzachten.

Gebruik dit programma Niet om uw wasgoed

volledig te drogen. Verwijder uw wasgoed en ventilier het onmiddelijk nadat het programme voltooid is.

- Dagelijks

Dit programma worden gebruikt om dagelijks katoen en synthetisch wasgoed te drogen en het duurt ongeveer 1,5 uu.

BabyProtect

Dit programme worden gelebruikt voor babykleding die in de droogautomaat gedroogd mag worden.

Fijne was (Delicaat)

U kunt uw zeer fjne wasgoed dat kan worden gedroogd of wasgoed dat met de hand moeten worden gewassen, drogen op een lagere temperatuur.

BEKO DPU8360X - Fijne was (Delicaat) - 1

Het is aan te bevelen om een kledingzakte gebruiken om te verhinderen dat fijn wasgoed gekreukt of beschadigd raakt. Neem uw wasgoed onmiddelijk uit de droogautomaat en hang ze op nadat het programme beeindigd is om te vermijden dat ze kreuken.

Verluchten

Er worden enkel gedurende 10 minutengeventileerd zonder warme lucht te blazen. Ukunt de kleding die gedurende langeijd in een gesloten omgeving werk geplaatst, verluchten dankzij dit programma om onaangenamegeuren te ontgeuren.

Tijdschakelaarprogramma's

U kunt een van de timerprogramma's 10 min., 20 min., 30 min., 40 min., 50 min., 60 min., 80 min., 100 min., 120 min., 140 min. en 160 min. selecteren om het gewenste droogteniveau bijlage temperaturen te verkrijgen.

i Met dit programma droogt de machine de gekozen tjidsduur ongeacht het droogniveau.

BEKO DPU8360X - Tijdschakelaarprogramma's - 1

Programmaselectie en verbruikstabel

FL

Programma'sCapaciteit (kg)Centrifugeersnelheid in wasm machine (tpm)Hoeveelheid resterende vochtigheid bij benaderingDroogtijd (minutes)
Katoen/Gekleurde was
Extra droog81000% 60190
Kastdroog81000% 60179
Strijkdroog81000% 60150
BabyProtect31000% 6080
Hemden1.51200%5050
Jeans41200%50120
Dagelijks41200%5090
Mix (Gemengd)41000%60115
Sport (Sportkleding)41000%60105
Expres11200%5045
Fijne was (Delicaat)2600%4055
Wolverzorging1.5600%508
Synthetisch
Kastdroog4800% 4070
Strijkdroog4800% 4055
Waarden energieverbruik
Programma'sCapaciteit (kg)Centrifugeersnelheid in wasm machine (tpm)Hoeveelheid resterende vochtigheid bij benaderingWaarde energieverbruik kWh
Katoen linnen klaar om te dragen*81000% 602.47
Katoen strijkklaar81000% 602.1
Synthetisch kastdroog4800% 400.95

*: Energy Label standaard programma (EN 61121:2005)
Alle waarden in de tabel werden vastgelegd volgens de EN 61121:2005 Standaard. Deze waarden können afwijken van de tabel afhankelijk van het wasgoedtype, centrifugeersnelheid, milieuomstandigheden en voltageschommelingen.

Hulpfuncties Audiowaarschuwing

De machine geeft een audiowaarschuwing wonneer het programma ten einde is.
Indien u Niet wilt dat de machine een audiowaarschuwing geeft, drukt u herhaardelijk op de volumeniveauknop tot "x" op het scherm verschijnt. Gebruikdezelfde knop om het volumeniveau aan te passen.

U kurz deze functie inschakelen voor of nadat het programme start.

BEKO DPU8360X - Hulpfuncties Audiowaarschuwing - 1

Audiowaarschwung annulerten

BEKO DPU8360X - Hulpfuncties Audiowaarschuwing - 2

Audiowaarschwuling niveau 1

BEKO DPU8360X - Hulpfuncties Audiowaarschuwing - 3

owaarschuwing niveau 2

BEKO DPU8360X - Hulpfuncties Audiowaarschuwing - 4

Audiowaarschwiring niveau 3

Droogteniveau

Wordt gebruikt om het gewenste droogteniveau in te stellen. Er wordenmeer gedroogd dan de standaardinstellen gen wanner het "+"-teken verschijnt en er worden minder gedroogd wanner het "-"-teken verschijnt. De programmatijd kan afhankelijk van de selectie veranderen.

U Aunt deze functie slechts inschakelen voor of nadat het programme start.

BEKO DPU8360X - Droogteniveau - 1

BEKO DPU8360X - Droogteniveau - 2

BEKO DPU8360X - Droogteniveau - 3

BEKO DPU8360X - Droogteniveau - 4

Antikreuk

U kunt de antikreukfunctie gelebruiken om te voorkomen dat het wasgoed kreukt indien u het wasgoed Niet meteen na afloop van het programma verwijdert. Dit programma roteert het wasgoed 2aar lang iedere 240 seconden om het kreulen te voorkomen.

Antikreuk worden geactiveerd maar het programme loopt in het eerste voorbeeld. De droogcyclus is voltooid en de antikreukfase is begonnen in de tweede schermafbeelding.

BEKO DPU8360X - Antikreuk - 1

Druk op de antikreukknop om deze functie in te schakelen.

Het contrast wizigen

Wijzig het schermconstraint om de symbolen op het scherm duidelijkker te lately verschijnen. Het kan met name nodig zijn om de contrastinstelling van het display te wijdigen als de wasdroger op een wasmachine is geinstalleerd.

Houd de knop Centrifugeersnelheid/ Tijdschakelaarprogramma gedurende 3 seconden ingedrukt.

Als het contrast veranderd is zullen alle symbolen op het scherm 3 seconden verschijnen om aan te given dat het proces voltooid is.

Voerdezelfde procedureuitom terug te kerenaar de vorige contrastinstselling.

Waarschuwingssymbolen

i Waarschuwingssymbolen kannen verschillen afhankelijk van het model van uw machine.

Pluisfilterreiniging

Wanneer het programme voltood is, verschijnt er een waarschuwingssymbol om u eraan te herinneren dat het filter gereinigd dient te worden.

i Indien het Filterreiningssymbool ononderbroken knippert, raadpleeg het hoofdstuk "Probleemoplossing".

BEKO DPU8360X - Pluisfilterreiniging - 1

Waterreservoir

Wanner het programma voltooid is, verschijnt er een waarschuwingssymbol om u eraan te herinneren dat het waterreservoir geleegd dient te worden.

Indien het waterreservoire vol raakt tijdens het draaien van het programma za het waarschuwingssymbol beginnen te knipperen en de machine pauzeren. Leeg het water uit het waterreservoir en druk de knop Start / Pauze / Annuleren om het programma te hervatten. Het waarschuwingssymbol verdwijnt en het programma hervat.

BEKO DPU8360X - Waterreservoir - 1

Het reiningen van de filterlade

Waarschuwingssymbolen knipperen met een zekere interval om u eraan te herinneren dat de filtercade gereinigdClient te worden.

BEKO DPU8360X - Het reiningen van de filterlade - 1

Vuldeur open

Dit waarschuwingssymbol verschijnt wanner de laaddeur van de wasdroger open staat.

BEKO DPU8360X - Vuldeur open - 1

Startuitstel

De startuitstelfunctie stelt u in staat het in werkig treden van het programme uit te stellen tot maximaal 24 uur.

  1. Open de vuldeur en voeg wasgoed toe.
  2. Stel het droogprogramma, de centrifugeersnelheid in en indien vereist, selecteer de hulpfuncties.
  3. Druk op de knoppen Startuitstel + en - om de gewensteijd in te stellen. Het startuitstelsymbol knippert.
  4. Druk op de Starten/Pauze/Annuleren-knop. De startuitstel begint af te tellen. Het startuitstelsymbol gaat branden. Startsymbool verschijnt. De “:” in het midden van de weergegeven startuitstel stopt met knipperen.
    Tijdens de startuitstelteriode kan meer was worden geladen of verwijderd. Aan het einde van het startuitstel-aftelproces, verdwijnt het startuitstelsymbol, begint de droogcyclus en wordt de programmaduur weergegeven. Deijd op het display is het toaal van de normale droogtijd en de startuitstel.

BEKO DPU8360X - Startuitstel - 1

Startuitstelwordt ingeschakeld door de

Start / Pauze / Annuleren-knop in de hierbovenstaante afbeelding.

De uiststeltijd wijzigen

Indien u tijdens het aftellen de hijd wilt wijzigen:

  1. Druk de knop Starten/Pauze/Annuleren gedurende 3 seconden in om hetprogramma te annuleren. Herhaal deuitsteltijdprocedure voor de gewenstearend.
  2. Stel de gewenste uitseltijd in met Uitseltijd + en - knuppen. Het startuitstelsymbol knippert.
  3. Druk op de Starten/Pauze/Annuleren-knop. De startuitstel begint af te tellen. Het startuitstelsymbool gaat branden. Het pauzesymbool verdwijnt. Startsymbool verschijnt.
  4. De “:” in het midden van de weergegeven startuitstel stopt met knipperen.

Het annuleren van de startupstel

Indien u het aftellen van de startuitstel wilt annuleren en het programma onmiddelijk wilt starten:

  1. Druk de knop Starten/Pauze/Annuleren gedurende 3 seconden in om het programme te annuleren.
  2. Druk op de knop Start / Pauze / Annuleren om het programme te startendat u eerder heeft gekozen.

Hetprogramma starten

Druk op de knop Start / Pauze / Annuleren om het programme te starten.

Het symbol Start / Pauze gaat branden om aan te Geven dat het programma is gestart en het pictogram : :tussen de resterende tijd blijft knipperen.

Programmaverloop

BEKO DPU8360X - Programmaverloop - 1

De voortgang van een draaiend programme wordt op het scherm aangegeven door een aantal symbolen.

Aan het begin van elke programmafase, za

het relevante symboluiet een reeks symbolen branden en aan het einde van het programma zullen bijgevolg alle symbolen branden. Het uittersrechtse symbol op het scherm geegt deuitvoerende fase wee.

Drogen

Drogingssymbolen gaan branden in alle programma's behave in ventilation.

Strijkdroog

Begint op te lichten wanner het droogteniveau de Strijkdroogfase heeft bereikt.

Kastdroog

Begint op te lichten wanner het droogteniveau de Kastdroogfase heeft bereikt.

Extra kastdroog

Begint op te lichten wanner het droogteniveau de Extra kastdroogfase heeft bereikt.

Verluchten

Het ventilationsymbol Licht op wanner het programme voltooid is.

i Het antikreuklampje gaat aan het einde van het programma branden als de antikreukfunctie is geactiveerd.

Kinderslot

De machine is uitgerust met een Kinderslot dat voorkomt dat het huidige programma gehinder wordt door het drukken op een knop. Alle knappen behalte de aan/uit-toets op het paneel zijn gedeactiveerd als het Kinderslot ingeschakeld is. Druk de knappen "audiowaarschuwing" en "antikreuk" geleiktijdig en gedurende 3 seconden in om het kinderslot te activeren. Om een/Newu programme te starten nadat het huidige programme beeingidg is of om het programme te onderbreken, moet het kinderslot worden gedeactiveerd. Druk gedurende 3 seconden opdezelfde knopper om het kinderslot te deactiveren.

Het vergrendelsymbol verschijnt op het scherm als het kinderslot is geactiveerd.

BEKO DPU8360X - Kinderslot - 1

i Het kinderslot is gedeactiveerd wanner

de machine uitgezet worden door op de aan/uit-knop te drukken.

Wanner het kinderslot geactiveerd is:

  • De scherempictogrammen zullen nicht veranderen, zichs als de positie van de programmaknop gewijzigid is verwijl de machine al dan nicht werkig is.
  • Als het kinderslot gedeactiveerd is de positie van de programmakeuzeknop te wijzigen terwijl de machine in werkig is, stopt de machine en worden de neue programme-informatie weergegeven.

Verander hetprogramma nadat het werk gestart

Na het starten van de machine kut u het gekozen programma veranderen en kut u uw wasgoed met een ander programma drogen.

  1. Indien u Extra droogprogramma wilt selectoren in plaats van strijkdroog drukt u gedurende 3 seconden op Start / Pauze / Annuleren om het programme te annuleren.
  2. Kies het Extra droog-programma door de Programmakeuzeknop te draaien.
  3. Druk op de knop Start / Pauze / Annuleren om het programme te starten.
    U kunt ook een neue programmika kiezen door de Programmakeuzeknop te draaien tijdens het draaien van de machine. In dit geval wordt het huidige programmagestaatk en verschijnt de neueprogrammainformatie op het scherm.

BEKO DPU8360X - Verander hetprogramma nadat het werk gestart - 1

Wasgoed toevoegen/verwijderen in de pauzemodus

Om wasgoed toe te voegen of te verwijderen na het opstarten van het droogprogramma:

  1. Druk op de knop Starten/Pauze/ Annuleren om de machine over te schakelen op de pauzestand. Het droogproces zal stoppen.
  2. Tijdens de Pauzemodus opent u de

vuldeur, voegt u wasgoed toe of neemt u wasgoed uit en sluit u de vuldeur.

  1. Druk op de knop Start / Pauze / Annuleren om het programme te starten.

Alle wasgoed dat toegevoegd werk na het starten van het droogproces, kan de reeds droge kleding in de machine doen vermengen met de natte kleding. Het resultaat za, na beeindiging van het droogproces, nat wasgoed zich.
U kunt dit proces van wasgoed toevoegen of uithalenijdens het drogen zo vaak herhalen als u wilt. Dit proces zar echter de programmaduur en het energieverbruik verhogen, odomat het droogproces herhaardelijk worden onderbroken. Het is waarom aanbevolen wasgoed toe te voegen voor het droogprogramma worden gestart.
i Indien u een neueu programma selecetert door de programmaknop te draaienterwijl uw machine in Pauzemodus staat, wordt het huidige programma afgebrozen en de neue programme-informatie weergegeven.
Raak de binnenkant van de trommel Niet aan wonneer u wasgoed toevoegt of uithaaltijdens het draaien van hetprogramma. Het oppervlak van de trommel is heet.

Annuleren van hetprogramma

Indien u om welke reden ook het drogen wilt stopzetten en het programma wilt annuleren nadat de machine begonnen is met draaien, drukt u de knop Start / Pauze / Annuleren gedurende 3 seconden in. De waarschuwingssymbolen "Pluizenfilter reinigen" en "Waterreservoir" gaan branden en het label "Einde" verschijnt op het scherm als herinnering aan het einde van dezeperiode.

BEKO DPU8360X - Annuleren van hetprogramma - 1

! Gezien de binnenkant van de machine zeer heet zal zich wonneer u een programma annuleertijdens de werking van de machine, moet u het ventilatieprogramma activeren ter afkoeling.
i De machine zal stoppen als u de programmakeuzeknop draaitijdens het draaien. In dit geval worden het huidige programmagestaatk en verschijnt de neue programme mainformatie op het scherm.

Programma-einde

De waarschuwingssymbolen Pluisfilterreiniging en Waterreservoir gaan branden in de programmeverloopindicator en Einde-label verschijnt in het scherm wonneer het programme beeindigt. De vuldeur kan worden geopend en de machine is maar voor een tweede cyclus. Druk Aan / Uit-knop om de machine uit te schakelen.

BEKO DPU8360X - Programma-einde - 1

Indien de antikreukfunctie insgeschakeld is en het wasgoed aan het eind van het programme Niet uit de machine is verwijderd, worden de 2-uur antikreukfunctie insgeschakeld.
Reinig het plusifilter na elke droogcylclus. (Zie "Plusifilter / Binnenkant vuldeur")
Leeg het waterreservoir na elke droogcylclus. (Zie "Legen van het waterreservoir")

5 Onderhoud en reiniging

Levensduur van het product worden verlangd en veelvoorkomende problemen worden verminderd indien reiniging regelmatig plaatsvindt.

4 Dit product dient van de stroom afgekoppeld te worden tijden onderhouds- en reinigingswerkzaamheden (bedieningspaneel, centrale deel, enz.).

Pluisfilter / Binnenkant vuldeur

De pluizen en verzels die vrijkomen van het wasgoed in de lucht tijdens de droogbeurt, worden verzameld in de pleasfilter.

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 1

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 2

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 3

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 4

Zulke pluizen en verzels worden meestal gezormdijdens het dragen en wassen.
Reinig het pluisfilter en de binnenkant van de vuldeur.altijd na ieder droogproces.
U kunt het filter en filterbehuizing reinigen met een stofzuiger.

Om de plusfilter te reinigen:

  1. Open de vuldeur.
  2. Verwijder de pleasifilter door deze omhoog te trekken en de pleasifilter te openen.
  3. Reinig de vezels, pluizen en katoenrafels met de hand of met een zachte doek.
  4. Sluit de pluisfilter en plaats deze terug in zich behuizing.
    Op de pleasiflterporieen kan, na de machine enige tijd te gebruiken, een laag ontstaan dat een verstopping van het pleasiflter kanveroorzaken. Was het pleasiflter met warm water om de opgebouwde laag op het oppervlak van het pleasiflter te verwijderen. Droog het pleasiflter volledig voordat u het terugplaatst.

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 5

Reinig de volledige binnenkant van de vuldeur en de vuldeurpakking.

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 6

BEKO DPU8360X - Pluisfilter / Binnenkant vuldeur - 7

Het reinigen van de sensoren

BEKO DPU8360X - Het reinigen van de sensoren - 1

Er bevinden zich vochtigheidssensoren in de machine die detecteren wanneer het wasgoed droog is of Niet.

Het reinigen van de sensoren:

  1. Open de vuldeur van de machine.
  2. Laat de machine afkoelen indienzsche nog steeds heet is door het droogproces.
  3. Veeg de metalen oppervlakken van de sensoren met een zachtde doek, bevochtigld met azijn, af en droog ze af.

Reinig de metalen oppervlakken van de sensoren 4 maal peraar.
i Gebruik geen metalen gereedschap bij het reinigen van de metalen oppervlakken van de sensoren.
! Gebruik nooit oplosmiddelen, reinigingsmiddelen en gelijkaardige middelen voor het reinigen, waar dat deze materialen brand en een explosie kannenveroorzaken!

Legen van het waterreservoir

De vochtigkeit van het wasgoed worden verwijderd en gecondenseerdrijk den het droogproces en het ontstane water verzameld zich in het waterreservoir. Leeg het waterreservoir na elkde droogcyclus.

! Gecondenseerd water is nicht drinkbaar! ! Verwijder nooit het waterreservoir zolang het programma loopt!

Indien u vergeet om het waterreservoir leeg te make, zal de machine stoppentijdens de volgende droogcycli wanner het reservoir vol is en het waarschuwingslampje "Waterreservoir" begint te knipperen. Als dit het geval is, druk dan op de knop Starten / Pauze / Annuleren om het drogen te hervatten nadat u het reservoir hebt leeggemaakt. Afwateren van het waterreservoir:

  1. Trek de lade open en verwijder het waterreservoir voorzichtig

BEKO DPU8360X - Legen van het waterreservoir - 1

  1. Maak het waterreservoir leeg.

BEKO DPU8360X - Legen van het waterreservoir - 2

  1. Indien er pluizen zitten in de trechter van het waterreservoir, spoel dit dan weg onder stromen water.
  2. Plaats het waterreservoir terug in zijn behuizing.

Het reiningen van de filterlade

Pluizen en verzels die nicht door het pluizenfilter werden opgevangen zijn geblokkeerd in de filterade anschter de beschemingsplaat. Het waarschuwingssymbol Filteradereiniging gaat om u eraan te helpen herinneren maximaal elke 5 droogcycli branden. Er bevindt zich een tweefasefilter in de filterade. De eerste fase is de filteradespons en de tweede fase is het filterdoek. Om de filterade te reinigen:

  1. Druk op de beschermplaatknop om de beschermplaat te openen.

BEKO DPU8360X - Het reiningen van de filterlade - 1

  1. Verwijder de filteradedeksen door deze in de richting van de pijl te draaien.

BEKO DPU8360X - Het reiningen van de filterlade - 2

  1. Trek de filterlade UIT.

BEKO DPU8360X - Het reiningen van de filterlade - 3

  1. Open de filterlade door op de rode knopte drukken.

BEKO DPU8360X - Het reiningen van de filterlade - 4

  1. Verwijder de sponsuit de filterlade.

BEKO DPU8360X - Het reiningen van de filterlade - 5

  1. Reinig de verzels, pluizen en katoenrafels op het filterdoek met de hand of met een zachte doeck.

BEKO DPU8360X - Het reiningen van de filterlade - 6

i Indien u een laag waarneemt, die möglichk het filterdoek, verstopt dient u de laag te reinigen met warm water. Laat het

filterdoek grondig drogen voordat udez terugplaatst in de filterlade.

  1. Was de spons van de filterlade omdez te ontdoen van haar en pluizen,1, Kneed de spons met de hand uit om overmatig water te verwijderen.

i Het is nicht nodig de sponsors te reinigen als de pleas- en gezelophoping nicht noemenswaardig is.

  1. Plaats de spons terug op+zijn plaats.

BEKO DPU8360X - Het reiningen van de filterlade - 7

  1. Sluit de filterlade door de rode knop te vergrendelen.

BEKO DPU8360X - Het reiningen van de filterlade - 8

  1. Plaats de filterlade terug op+zijn plaats, draai de filterladedeksel met de klok mee en verzeker u ervan dat deze goed gesloten is.

BEKO DPU8360X - Het reiningen van de filterlade - 9

  1. Plaats de beschermplaat terug.

BEKO DPU8360X - Het reiningen van de filterlade - 10

i Het drogen zonder de geplaatste filterladespons zar uw machine beschadigen!
Een vuil prisifilter en filterlade zullen langere droogduur en hoger energieverbruikveroorzaken.
Op dePLUSfilterporieën kan,na uw machine enige tijd te gebruiken,een laag ontstaan dat een verstopping van hetPLUSfilter kanveroorzaken. Was hetPLUSfilter met warm water om de opgebouwde laag op het oppervlak van hetPLUSfilter te verwijderen. Droog hetPLUSfilter volledig voordat u het terugplaatst.

Het reinigen van de verdamper

Reinig de op de verdamperflappen verzamelde pluizen, die zich anschter de filterlade bevinden, met een stofzuiger.

BEKO DPU8360X - Het reinigen van de verdamper - 1

Indien u beschermende handschoenen draagt kurz u ook met de hand reinigen. Probeer nicht te reinigen met blote handen.

6 Probleemoplossing

Het droogproces duurt te lang.
• Pluisfilterporieën zijn verstopt. >>> Was het pluisfilter met warm water. • Filterlade is verstopt. >>> Reinig de spons en het filterdoek in de filterlade. • Ventilatierooesters aan de voorkant van de machine+zijn geblokkeerd. >>> Verwijder de (evt.) voorwerpen die de ventilatie voor de ventilatierooesters blokkeren. • Ventilatie is Niet voldoende omdat de ruimte waar de machine geinstalleerd is heel Klein is. >>> Open de deur en het raam van de ruimte om te voorkomen dat de kamertemperatuur te hoog worden. • Er heeft zich kalkaanslag op de vochtigkeitssensor gezormd. >>> Reinig de vochtigkeitssensor. • Er is veel te veel wasgoed geladen. >>> Plaatiet Niet teveel wasgoed in de wasdroger. • Het wasgoed is Niet voldoende gecentrifugeerd. >>> Centrifugeer uw wasgoed op een hogere snelheid in uw wasmachine.
Het wasgoed is nat aan het einde van de droogbeurt.
i Na het drogen voelt het hare wasgoed vochtiger dan het daadwerkelijkke vochtighidesniveau. • Het gekoenprogramma is waarschijnlijk Niet geschikt voor het type wasgoed.>>> Checking the care labels on clothes, select appropriate programme for the laundry type or use timer programmes in addition. • Pluisfilterporieën zijn verstopt. >>> Was het pluisfilter met warm water. • Filterlade is verstopt. >>> Reinig de spons en het filterdoek in de filterlade. • Er is veel te veel wasgoed geladen. >>> Plaatiet Niet teveel wasgoed in de wasdroger. • Het wasgoed is Niet voldoende gecentrifugeerd. >>> Centrifugeer uw wasgoed op een hogere snelheid in uw wasmachine.
De wasdroger gaat Niet aan of het programma start Niet. De wasdroger start Niet na het instellen.
• De stekker zit Niet in het stopcontact. >>> Kijk of de stekker in het stopcontact zit. • De vuldeur staat op een kier. >>> Zorg ervoor dat de vuldeur juist gesloten is. • Er is geen programma gekozen of de knop Start / Pauze / Annuleer is Niet ingedrukt. >>> Zorg ervoor dat het programma is ingesteld en dat de machine Niet in de pauzemodus staat. • Kinderslot is ingeschakeld. >>> Inactiveer het kinderslot.
Het programme werk zonder enige oorzaak onderbroken.
• De vuldeur staat op een kier. >>> Zorg ervoor dat de vuldeur juist gesloten is. • Er een stroomonderbreking was. >>> Druk op de knop Start / Pauze / Annuleren om het programme te starten. • Waterreservoir is vol. >>> Legen van het waterreservoir
Het wasgoed is gekrompen, verwilt of beschadigd.
• Er is geen geschikt programme gekrukt voor het woort wasgoed. >>> Controller het kledinglabel en kies een geschikt programme voor de stofsoort.
De trommelverlichting brandt nicht. (Alleen bij modellen met verlichting)
• De wasdroger is Niet aangezet met een Aan / Uit-knop. >>> Zorg ervoor dat de wasdroger ingeschakeld is. • Lampje is defect. >>> Bel het Erkende Servicebedrijf om de lamp te latentervangen.
Het symbool "Einde/Antikreuk" brandt.
• Het antikreukprogramma is ingeschakeld om te voorkomen dat het achtergebleven wasgoed in de machine kreukt. >>> Schakel de wasdroger uit en verwijder het wasgoed.
Eind-symbool brandt.
• Het programme is afgelopen. Schakel de wasdroger uit en verwijder het wasgoed.
Het symbool "Reinigen van plurisfilter" brandt.
• Pluisfilter is Niet schoongemaakt. >>> Reinig het plurisfilter.
Het symbool "Reinigen van plurisfilter" knippert.
• Filterbehuzing is verstopt met pluizen. >>> Reinig de plurisfilterbehuzing. • Er heeft zich een laag op de plurisfilterporieën gezormd dat verstopping kan veroorzaken. >>> Was het plurisfilter met warm water. • Filterlade is verstopt. >>> Reinig de spons en het filterdoek in de filterlade.
Er komt water uit de vuldeur
• Er hebben zich pluizen opgehoopt op de binnenkant van de vuldeur en op de oppervlakken van de vuldeurpakking. >>> Reinig de binnenkant van de vuldeur en de oppervlakken van de vuldeurpakking.
Vuldeur opent spontaan.
• De vuldeur staat op een kier. >>> Duw de vuldeur)dicht tot u een sluitend geluid hoort.
Het waarschuwingssymbol "Waterreservoir" brandt/knippert.
• Waterreservoir is vol. >>> Legen van het waterreservoir • Waterafvoerslang is gebogen. >>> Indien het product direct maar een afvalwaterpijp is verbonden, checkt u de waterafvoerpijp.
Het waarschuwingssymbol Filterladereiniging knippert.
• Filterlade is Niet schoongemaakt. >>> Reinig de spons en het filterdoek in de filterlade.

BEKO DPU8360X - Probleemoplossing - 1

Indien u het probleem Niet Aunt oplossen na het opvolgen van de instructies in dit hoofdstuk, dient u uw dealer of het Erkende Servicebedrijf te raadplegen. Probeer geen nicht-functioneel product zelf te repareren.

Please read this user manual first!

Dear Customer,

We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure.

Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.

The user manual will help you use your product in a fast and safe way.

  • Read the user manual before installing and starting your product.
  • Always follow the safety instructions.
  • Keep this user manual within easy reach for future reference.
  • Read also the other documents supplied with the product.

Remember that this user manual is also applicable for several other models.

Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

BEKO DPU8360X - Explanation of symbols - 1

Read the instructions.

BEKO DPU8360X - Explanation of symbols - 2

Important information or useful hints about usage.

BEKO DPU8360X - Explanation of symbols - 3

Warning for hazardous situations with regard to life and property.

BEKO DPU8360X - Explanation of symbols - 4

Warning for electric shock.

BEKO DPU8360X - Explanation of symbols - 5

Warning for fire hazard.

BEKO DPU8360X - Explanation of symbols - 6

Warning for hot surfaces.

BEKO DPU8360X - Explanation of symbols - 7

This appliance's packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

1 Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

  • Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
  • Do not operate the product if the power cable / plug is damaged. Call the Authorized Service Agent.
  • Do not make any changes on the plug supplied with the product. If it is not compatible with the socket, have a qualified electrician change the socket with a suitable one.
  • Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
  • Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table.
  • Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product. This plug must be inserted into a socket which is installed and grounded in accordance with the local laws and regulations. Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure. Do not neglect to have the grounding installation made by a qualified electrician. If you have any suspect about the grounding installation, have it

checked by a qualified electrician or the Authorized Service Agent. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

  • The product should not be plugged in during installation, maintenance, cleaning and repair works.
    Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
  • Do not use electrical devices in the product.
  • Do not connect the air exit of the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel.
  • You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.
  • Pay attention that the air inlet openings are unobstructed
  • Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.
  • Do not dry the laundry cleaned with industrial chemicals in the dryer.
    Underwear that contains metal reinforcements should not be dried in

the dryer. Dryer can get damaged if metal reinforcements come loose and break off during drying.

  • Never attempt to repair the product yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others' lives in danger.
  • For failures that you cannot remedy by applying the procedures in safety instructions, turn off and unplug the product and call the Authorized Service Agent.
  • Do not reach into the machine when the drum is spinning.
  • Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock.
  • Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

The final step of the drying programme, namely the cool-down step is performed without applying heat to ensure that the laundry items are kept at a temperature that will not damage them. If you open the loading door before the cool-down step completes, hot vapour will come out.
! Never stop the dryer before the programme completes. If you must do this, remove all laundry quickly and lay them out to a suitable place to dissipate the heat.
Always clean the lint filter before or after each loading. Never operate the

dryer without the lint filter installed.

  • Clean inside and exhaust duct of the product regularly. Do not allow fibre, dust and dirt accumulation around the exhaust exit and at adjacent areas.
  • Power cable plug must be within easy reach after installation.
  • Do not dry unwashed items in the dryer.
  • Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
  • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.
  • Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the relevant product.
  • Use softeners, anti-static products and etc. in accordance with the instructions of their manufacturers.
  • Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.
  • Do not install or leave the dryer in places where it will be exposed to outdoor conditions.
  • Your product can be operated at temperatures between +5^ and +35^ . If the operating conditions fall outside of this range, operation of the product will be adversely affected and it can get damaged.
  • Do not tamper with the controls.
    Unplug the product when it is not in

use.

  • Remove the loading door of the drying compartment before decommissioning or disposing of the product.
  • Check all garments before loading and make sure that there is no any lighters, coins, metal pieces, needles, and etc. in their pockets or on them.
  • Make sure that the pets do not enter into the product. Check the drum of the product before using it.
  • Make sure that original spare parts and accessories are used during maintenance works.
  • Do not lean on the loading door when it is open. The product may tip over.
  • When your machine is not in use or when you unload the laundry after completion of drying process, turn the machine off with the On/Off button. In cases where the On/Off button is in On position (while the machine is energized), keep the loading door closed.

Intended use

  • This product has been designed for domestic use. It should not be used for other purposes.
  • Product must only be used for drying of textiles that are marked accordingly.
  • Dry only those articles in your product that are stated in this manual.
  • This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Children's safety

  • Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the product.
  • Do not allow children sit/climb on or enter in the product.
  • Do not forget to close the loading door when leaving the room where the product is located.
  • Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.

2 Installation

Refer to the nearest Authorized Service Agent for installation of the product. To make the product ready for use, make sure that the electricity and water drainage system are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

Preparation of the product's location as well as the electrical and waste water installations is under customer's responsibility.
Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
Let your dryer wait for 12 hours before starting to use it.

Appropriate installation location

Install the product on a stable and level surface.
- Dryer is heavy. Do not move it by yourself.
- Operate your product in a well ventilated, dust-free environment.
- Do not block the air ducts in front of and under the product with materials such as long pile rugs, wooden blocks and bands.
- Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.
- Once the product is installed, it

should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does not touch anywhere (tap, socket, etc.). Also pay attention to select an installation location which you will not be required to change afterwards.

  • Place the product at least 1.5 cm away from the edges of other furniture.
    Do not place the product on the power cable.

Removing the transportation safety assembly

Remove the transportation safety assembly before using the product for the first time.

  1. Open the loading door.
  2. There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX XX.
  3. Pull the nylon towards yourself and remove the transportation safety assembly.

BEKO DPU8360X - Removing the transportation safety assembly - 1

Make sure that no part of the transportation safety assembly remains inside the drum.

Under counter installation

  • This product can be installed under a counter if the height of the counter is sufficient.
    While using undercounter dryer, it

should never be operated without undercover installation part.

Dryer Depth60 cm54 cm
Stock number of under-bench installation part29797001002973600100
  • Leave at least 3 cm of space around the sides and the rear wall of the product when installing it under a counter or in a cupboard.

Mounting over a washing machine

  • A fixing device should be used between the two machines when installing the dryer above a washing machine. The fixing device (2977200100 white/2977200400 grey) must be installed by the Authorized Service Agent.
  • Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!

Connecting to the drain

In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle.

You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.

BEKO DPU8360X - Connecting to the drain - 1

BEKO DPU8360X - Connecting to the drain - 2

Connecting the water drain hose

  1. Pull hose in the product by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.
  2. Connect one end of the drain hose supplied separately with the product to the connection point from where you removed the hose of the product in previous step.
  3. Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.

Hose must be fixed in every type of connection. Your house will be flooded if the hose comes loose during water discharge.
Water drain hose should be attached to a height of maximum 80 cm.
Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.

Adjusting the feet

In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.

Turn the feet to left or right until the

machine stands level and firmly.

BEKO DPU8360X - Adjusting the feet - 1

i Never remove the adjustable feet from their housings.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

  • Connection must comply with national regulations.
  • Power cable plug must be within easy reach after installation.
  • The voltage and allowed fuse or breaker protection are specified in the "Technical specifications" section. If the current value of the fuse or breaker in the house is less than 10 Amps, have a qualified electrician install a 10 Amp fuse.
  • The specified voltage must be equal to your mains voltage.
  • Do not make connections via extension cables or multi-plugs.
  • The main fuse and switches must have a contact distance of minimum 3 mm.
    Damaged power cable must be replaced by the Authorized Service Agent.
    If the product is faulty, it must not be operated unless it is repaired! There is the risk of electric shock!

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

Disposing of packaging material

Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.

Transportation of the product

  1. Unplug the product before transporting it.
  2. Remove the water drain (if any) and chimney connections.
  3. Drain the water in the product completely.

We recommend carrying the product in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying it by tilting towards the right side when looked from the front. After the product is moved to its new place, you should wait for 12 hours before starting it.

Disposing of the old product

Dispose of the old product in an environmentally friendly manner.

Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product.

For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product.

Warnings about sounds

It is normal to hear metallic noise from the compressor sometimes during operation.

BEKO DPU8360X - Warnings about sounds - 1

Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process.

BEKO DPU8360X - Warnings about sounds - 2

Technical specifications

EN

Height (adjustable)84,6 cm
Width59,5 cm
Depth59,8 cm
Capacity (max.)8 kg
Weight (net)49 kg
VoltageSee type label
Rated power input
Model code

Type label is located behind the loading door.

3

Things to be done for energy saving

Following information will help you use the product in an ecological and energy-efficient manner.

  • Operate the product at a capacity suitable for the program you have selected and pay attention not to overload.
  • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced.
  • Dry the same type of laundry together.
  • Follow the instructions in the user manual for programme selection.
  • Leave sufficient clearance at the front and rear side of the dryer for air circulation. Do not block the ventilation grills at the front side of the product.
  • Do not open the loading door of the machine during drying unless necessary. If you must certainly open the loading door, do not to keep it open for a long time.
  • Do not add new (wet) laundry during drying.
  • Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter. Clean the lint filter before or after each drying cycle.
  • Clean the filter drawer regularly either when the Filter Drawer Cleaning warning symbol appears or after every 5 drying cycles
  • Ventilate the room, where the dryer is located, well during drying.
  • For models with lamp, keep the door closed if the On/Off button is pressed (if the machine is energized) when

machine is not in use.

Laundry suitable for drying in the machine

Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.

BEKO DPU8360X - Laundry suitable for drying in the machine - 1

Laundry unsuitable for drying in the machine

  • Laundry and items stated below are not suitable for drying in a dryer:
  • Laundry items with metal attachments such as metal buttons, metal reinforcements or belt buckles.
  • Woolen or silk garments, nylon stockings, delicate embroidered fabrics and sleeping bags.
  • Garments made of delicate and valuable fabrics.
    Tulle curtains.
  • Items made of hermetic fibres such as pillows and quilts.
  • Very wet laundry items.
    Unwashed dirty laundry items.
  • Laundry items containing rubber foam or rubber.

Items cleaned, washed or spotted with gasoil/fuel oil, dry-laundry solvents, industrial chemicals or other combustible or explosive materials should not be dried in the dryer.
Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

Preparing laundry for drying

  • Check all garments before loading and make sure that there is no any lighters, coins, metal pieces, needles, and etc. in their pockets or on them.
  • Laundry may be tangled after washing. Separate the laundry items before placing them into the dryer.
  • Sort the laundry according to their types and thicknesses. Dry the same type of laundry together. For instance, thin kitchen towel and table cloths get dry earlier than the thick bath towels.

i Laundry must be spun at the highest spin speed that the washing machine allows on basis of the fabric type.

Correct load capacity

BEKO DPU8360X - Correct load capacity - 1

Follow the instructions in the "Programme selection and consumption table". Do not

load more than the capacity values stated in the table.

It is not recommended to load the dryer with laundry exceeding the level indicated in the figure. Drying performance will degrade when the machine is overloaded. Furthermore, dryer and the laundry can get damaged.

Following weights are given as examples.

Home articlesApproximate weights (g)
Cotton quit covers (double)1500
Cotton quit covers (single)1000
Bed sheets (double)500
Bed sheets (single)350
Large tablecloths700
Small tablecloths250
Tea napkins100
Bath towels700
Hand towels350
GarmentsApproximate weights (g)
Blouses150
Cotton shirts300
Shirts200
Cotton dresses500
Dresses350
Jeans700
Handkerchiefs (10 pieces)100
T-Shirts125

Loading the laundry

  1. Open the loading door.
  2. Place the laundry in the machine without compressing.
  3. Push the loading door to close.

Ensure that no items are caught in the door.

BEKO DPU8360X - Loading the laundry - 1

BEKO DPU8360X - Loading the laundry - 2

4 Selecting a Programme and Operating Your Machine

BEKO DPU8360X - Selecting a Programme and Operating Your Machine - 1
Control panel

  1. Washing Machine Spin Speed / Timer Programme Selection button
  2. Display
  3. Start / Pause / Cancel button
  4. Programme Selection knob
  5. On / Off button
  6. Anti-creasing button
  7. Dryness Level button
  8. Cancel Audio Warning button
  9. Time Delay buttons

BEKO DPU8360X - Selecting a Programme and Operating Your Machine - 2

BEKO DPU8360X - Selecting a Programme and Operating Your Machine - 3

  • Spin speed is used to show the remaining time more accurately. It does not affect the performance of your machine.
    ** Time that appears on display indicates the remaining time until the end of the programme and changes according to the dampness level of the laundry.

Preparing the machine

  1. Plug in the machine.
  2. Place the laundry in the machine.
  3. Press the On / Off button.

i Pressing the On / Off button does not necessarily mean that the programme has started. Press Start / Pause / Cancel button to start the programme.

Programme selection

  1. Decide the appropriate programme from the table below which includes drying levels.
  2. Select the desired programme with the Programme Selection knob.
Extra DryOnly the cotton laundry is dried at normal temperature. Thick and multi layered laundry (towels, linens, jeans and etc.) are dried in a way that they do not require ironing before being placed in the wardrobe.
Cupboard dryNormal laundry (tablecloths, underwear and etc.) are dried in a way that they do not require ironing before being placed in the wardrobe.
Iron DryNormal laundry (shirts, dresses and etc.) are dried ready to be ironed.

For further programme details, see "Programme selection and consumption table".

Main programmes

Depending on the fabric type, the following main programmes are available:

Cottons

Dry durable laundry with this programme. Dries at normal temperature. It is recommended to use for your cotton items (bed sheets, quilt covers, towels,

bathrobes, etc.).

Synthetics

Dry less durable laundry with this programme. Recommended for synthetics.

Additional programmes

For special cases, following additional programmes are available in the machine.

Additional programs may differ according to the features of your machine.

Express

You can use this program to dry your cotton laundry that you have spun at high speeds in your washing machine. This program dries 1 kg cotton laundry (3 Shirts/3T-shirts) in 45 minutes.

To obtain better results from your dryer, your laundry must be washed at suitable programs and spun at the recommended speed in the washing machine.

- Shirt

This programme dries the shirts more sensitively and creases them less and thus, helps to iron them more easily.

There may be a little moisture on the shirts at the end of the programme. We recommend you not to leave the shirts in the dryer.

- Jeans

Use this programme to dry your jeans that are spun at high speeds in the washing machine.

- Mixed

Use this programme to dry non-pigmenting synthetic and cotton laundry items together.

- Sport

Use this programme to dry together the synthetic and cotton laundry items and the laundry items made of mixed fabrics.

- Wool Refresh

You can use this program to ventilate

and soften your woolen laundry that can be washed in the washing machine. Do not use this program to dry your laundry completely. Take out your laundry and ventilate them immediately after the program is over.

Daily

This program is used to dry cottons and synthetics daily, and lasts for 1.5 hour.

BabyProtect

This program is used for baby clothes that bear machine dryable approval on its label.

Delicates

You can dry your highly delicate laundry that are suitable for drying or laundry which is advised to be hand-washed at a lower temperature.

It is recommended to use a cloth bag to prevent certain delicate laundry from getting creased or damaged. Take your laundry immediately out of the dryer and hang them after the program is over in order to prevent them from getting creased.

- Ventilation

Only ventilation is performed for 10 minutes without blowing hot air. You can air the clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme.

- Timer programmes

You can select one of the 10 min., 20 min., 30 min., 40 min., 50 min., 60 min., 80 min., 100 min., 120 min., 140 min. and 160 min. timer programmes to achieve the desired final drying level at low temperatures.

With this programme, the machine dries for the time selected regardless of the dryness level.

BEKO DPU8360X - - Timer programmes - 1

Programme selection and consumption table

EN

ProgramsCapacity (kg)Spin speed in washing machine (rpm)Approximate amount of remaining humidityDrying time (minutes)
Cottons / Coloreds
Extra dry81000% 60190
Cupboard dry81000% 60179
Iron dry81000% 60150
BabyProtect31000% 6080
Shirt1.51200%5050
Jeans41200%50120
Daily41200%5090
Mixed41000%60115
Sport41000%60105
Express11200%5045
Delicates2600%4055
Wool Refresh1.5600%508
Synthetics
Cupboard dry4800% 4070
Iron dry4800% 4055
Energy consumption values
ProgramsCapacity (kg)Spin speed in washing machine (rpm)Approximate amount of remaining humidityEnergy consumption value kWh
Cupboard dry for cottons*81000% 602.47
Iron dry for cottons81000% 602.1
Cupboard dry for synthetics4800% 400.95

*: Energy Label standard programme (EN 61121:2005)
All values given in the table have been fixed according to EN 61121:2005 Standard. These values may deviate from the values in the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.

Auxiliary functions Audio Warning

The machine will give an audio warning when the programme comes to an end. If you do not want the machine give an audio warning, press the Volume Level button repeatedly until "x" appears on the display. Use the same button to adjust the volume level.
You can activate this function either before or after the programme starts.

BEKO DPU8360X - Auxiliary functions Audio Warning - 1

Cancel audio warning

BEKO DPU8360X - Auxiliary functions Audio Warning - 2
Audio warning level 1

BEKO DPU8360X - Auxiliary functions Audio Warning - 3
Audio warning level 2

BEKO DPU8360X - Auxiliary functions Audio Warning - 4
Audio warning level 3

Dryness level

Used to adjust the required dryness level. More drying is performed compared to the default settings when "+" sign appears and less drying is performed when "- sign appears. Programmeduration can change depending on the selection.

You can activate this function only before the programme has started.

BEKO DPU8360X - Dryness level - 1

BEKO DPU8360X - Dryness level - 2

BEKO DPU8360X - Dryness level - 3

BEKO DPU8360X - Dryness level - 4

Anti-creasing

You can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end. This program rotates the laundry in every 240 second for 2 hours to prevent creasing. Anti-creasing is activated but the programme is still running in the first display image below. Drying cycle is completed and the Anti-creasing step has started in the second display image.

BEKO DPU8360X - Anti-creasing - 1

BEKO DPU8360X - Anti-creasing - 2

Press Anti-creasing button to activate this function.

Changing the contrast

Adjust the display contrast in order to make the symbols on the display appear clearer. It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine.

Press and hold the Spin Speed / Timer Programme button for 3 seconds.

When the contrast is changed, all symbols on the display will appear for 3 seconds in order to indicate that the process is complete.

Perform the same procedure to revert back to the previous contrast setting.

Warning symbols

Warning symbols may differ according to the model of your machine.

Lint filter cleaning

When the programme is completed, a warning symbol will appear to remind that the filter needs to be cleaned.

If the Filter Cleaning symbol flashes continuously, refer to "Troubleshooting" section.

BEKO DPU8360X - Lint filter cleaning - 1

Water tank

When the programme is completed, a warning symbol will appear to remind that the water tank needs to be drained. If the water tank becomes full while the programme is running, the warning

symbol will start to flash and machine will pause. Drain the water in the water tank and press Start / Pause / Cancel button to resume the programme. The warning symbol turns off and the programme resumes operating.

BEKO DPU8360X - Water tank - 1

Cleaning of filter drawer

Warning symbol flashes with certain intervals to remind that the filter drawer needs to be cleaned.

BEKO DPU8360X - Cleaning of filter drawer - 1

Loading door open

This warning symbol appears when the loading door of the dryer is open.

BEKO DPU8360X - Loading door open - 1

Time Delay

Time Delay function allows you to delay the startup of the programme up to 24 hours.

  1. Open the loading door and put the laundry in.
  2. Select the drying programme, spin speed and, if required, the auxiliary functions.
  3. Press Time Delay buttons + and - to set the desired time delay. The Time Delay symbol will flash.
  4. Press Start / Pause / Cancel button. The Time Delay starts to count down. The Time Delay symbol lights up. Start symbol appears. The “:” in the middle of the displayed delay time will start flashing.
    Additional laundry may be loaded / taken out during the Time Delay

period. At the end of the Time Delay countdown process, Time Delay symbol disappears, drying process starts and the programme duration is displayed. The time on the display is the total of normal drying time and delay time.

BEKO DPU8360X - Time Delay - 1

Time Delay is activated by pressing the Start / Pause / Cancel button in the above display image.

Changing the delay time

If you want to change the time during countdown:

  1. Press Start / Pause / Cancel button for 3 seconds to cancel the programme. Repeat the Time Delay procedure for the desired time.
  2. Set the desired delay time with Time Delay + and - buttons. The Time Delay symbol will flash.
  3. Press Start / Pause / Cancel button. The Time Delay starts to count down. The Time Delay symbol lights up. Pause symbol disappears. Start symbol appears.
  4. The “:” in the middle of the displayed delay time will start flashing.

Cancelling the Time Delay

If you want to cancel the Time Delay countdown and start the programme immediately:

  1. Press Start / Pause / Cancel button for 3 seconds to cancel the programme.
  2. Press Start / Pause / Cancel button to start the programme you have previously selected.

Starting the programme

Press Start / Pause / Cancel button to start the programme.
Start / Pause symbol will light up to indicate that the programme has started and “.” symbol between the remaining time will continue flashing.

Progress of programme

BEKO DPU8360X - Progress of programme - 1

Progress of a running programme is indicated on the display by means of a set of symbols.

At the beginning of each programme step, the relevant symbol in the series of symbols will light up and thus, at the end of the programme, all symbols will remain lit up. The rightmost symbol on the display indicates the step being carried out.

Drying

Drying symbol lights up in all programmes apart from ventilation.

Iron Dry

Starts to illuminate when the dryness level reach Iron Dry step.

Cupboard Dry

Starts to illuminate when the dryness level reach Cupboard Dry step.

Extra dry

Starts to illuminate when the dryness level reach Wardrobe Dry Extra step.

Ventilation

Ventilation symbol illuminates when the programme comes to an end.

Anti-creasing symbol will illuminate at the end of the programme if Anti-creasing function is activated.

Child-proof Lock

Machine is equipped with a Childproof Lock which prevents interfering with the current programme flow by pressing any button. All buttons except the On / Off button on the control panel are deactivated when the Child-proof Lock is active.

In order to activate the Childproof Lock, press Audio Warning and Anti-Creasing buttons simultaneously for 3 seconds. To start a new programme after the current programme is over or to interrupt the current programme, the Child-proof Lock should be deactivated. Press the same buttons for 3 seconds again to deactivate the Child-proof Lock.

Lock symbol will appear on the display when the Child-proof Lock is activated.

BEKO DPU8360X - Child-proof Lock - 1

Child-proof Lock is deactivated when the machine is switched off and on with On / Off button.

When the Child-proof Lock is activated:

  • Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt.
  • If the Child-proof Lock is deactivated after changing the position of the Programme Selection knob while the machine is running, the machine stops and new programme information is displayed.

Changing the programme after it has started

After the machine starts, you can change the selected programme and dry your laundry in a different programme.

  1. If you want to select Extra Dry

programme instead of Iron Dry programme, press and hold the Start / Pause / Cancel button for 3 seconds to cancel the programme.

  1. Select Extra Dry programme by turning the Programme Selection knob.
  2. Press Start / Pause / Cancel button to start the programme.
    You can also select a new programme by turning the Programme Selection knob while the machine is operating. In this case, current programme is aborted and the new programme information appears on the display.

BEKO DPU8360X - Changing the programme after it has started - 1

Adding / removing laundry in Pause mode

In order to add or take out laundry after the drying programme has started:

  1. Press Start / Pause / Cancel button to switch the machine to Pause mode. Drying process will stop.
  2. While in Pause mode, open the loading door, add or take out laundry and close the loading door.
  3. Press Start / Pause / Cancel button to start the programme.
    Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.
    You may repeat laundry adding or removing process as many times as you desire during drying. However, this process will increase

the programme time and energy consumption since the drying process will be interrupted repeatedly. Therefore, it is recommended to add laundry before the drying programme has started.

i If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode, then the current program is aborted and new programme information is displayed.
Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running. Surfaces of the drum are hot.

Canceling the programme

If you want to stop drying and cancel the programme for any reason after the machine has started to run, press and hold the Start / Pause / Cancel button for 3 seconds. Lint Filter Cleaning and Water Tank warning symbols light up and "End" label appears on the display as a reminder at the end of this period.

BEKO DPU8360X - Canceling the programme - 1

As the inside of the machine will be excessively hot when you cancel the programme while the machine is running, activate the ventilation program to cool it down.
Machine will stop if you turn the Programme Selection knob while it is operating. In this case, current programme is aborted and the new programme information appears on the display.

End of programme

Lint Filter Cleaning and Water Tank warning symbols light up in the programme follow-up indicator and "End" label appears on the display when the programme comes to an end. The loading door can be opened and the machine becomes ready for a second cycle.

Press On / Off button to switch off the machine.

BEKO DPU8360X - End of programme - 1

If Anti-creasing function is activated and the laundry is not taken from the machine at the end of the programme, 2-hours Anti-creasing programme is activated.
Clean the lint filter after each drying. (See "Lint Filter / Loading Door Inner Surface")
Drain the water tank after each drying cycle. (See "Draining the water tank")

5 Maintenance and cleaning

Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.

This product must be unplugged during maintenance and cleaning works (control panel, body, etc.).

Lint Filter / Loading Door Inner Surface

Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter.

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 1

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 2

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 3

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 4

i *Such fibre and lint are generally formed during wearing and washing.
Always clean the lint filter and the inner surfaces of the loading door after each drying process.
You can clean the lint filter housing with a vacuum cleaner.

To clean the lint filter:

  1. Open the loading door.
  2. Remove the lint filter by pulling it up and open the lint filter.
  3. Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth.
  4. Close the lint filter and place it back into its housing.
    A layer can build up on the lint filter pores that can cause clogging of the lint filter after using the machine for a while. Wash the lint filter with warm water to remove the layer that builds

up on the lint filter surface. Dry the lint filter completely before reinstalling it.

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 5

Clean the entire inner surface of the loading door and loading door gasket.

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 6

BEKO DPU8360X - Lint Filter / Loading Door Inner Surface - 7

Cleaning the sensors

BEKO DPU8360X - Cleaning the sensors - 1

There are dampness sensors in the machine that detect whether the laundry is dry or not.

To clean the sensors:

  1. Open the loading door of the machine.
  2. Allow the machine to cool down if it is still hot due to the drying process.
  3. Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and dry them.

i Clean metal surfaces of the sensors 4 times a year.
i Do not use metal tools when cleaning metal surfaces of the sensors.

! Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion!

Draining the water tank

Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.

Condensed water is not potable!
! Never remove the water tank when the programme is running!

If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause / Cancel button to resume the drying cycle.

To drain the water tank:

  1. Pull the drawer and remove the water tank carefully.

BEKO DPU8360X - Draining the water tank - 1

  1. Drain the water in the tank.

BEKO DPU8360X - Draining the water tank - 2

  1. If there is lint accumulation in the funnel of the water tank, clean it under running water.
  2. Place the water tank into its seat.

Cleaning the filter drawer

Lint and fibre that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate. Filter

Drawer Cleaning warning light will light up maximum at every 5 drying cycles as a reminder.

There is a two-level filter in the filter drawer. The first level is the filter drawer sponge and the second level is the filter cloth.

To clean the filter drawer:

  1. Press the kick plate button to open the kick plate.

BEKO DPU8360X - Cleaning the filter drawer - 1

  1. Remove the filter drawer cover by turning it in the direction of arrow.

BEKO DPU8360X - Cleaning the filter drawer - 2

  1. Pull out the filter drawer.

BEKO DPU8360X - Cleaning the filter drawer - 3

  1. Open the filter drawer by pressing the red button.

BEKO DPU8360X - Cleaning the filter drawer - 4

  1. Take out the filter drawer sponge.

BEKO DPU8360X - Cleaning the filter drawer - 5

  1. Clean lint, fibre, and cotton raveling on the filter cloth by hand or with a soft piece of cloth.

BEKO DPU8360X - Cleaning the filter drawer - 6

When you notice a layer that may lead clogging on filter cloth, please clean the layer by washing in warm water. Let the filter cloth dry thoroughly before installing back the filter drawer.

  1. Hand-wash the filter drawer's sponge to remove hair and lint on it. Squeeze the sponge by hand to remove excessive water.

It is not necessary to clean the sponge if lint and fibre accumulation on it is not significant.

  1. Place the sponge back into its place.

BEKO DPU8360X - Cleaning the filter drawer - 7

  1. Close the filter drawer as to lock the red button.

BEKO DPU8360X - Cleaning the filter drawer - 8

  1. Place the filter drawer back into its place, turn the filter drawer cower clockwise making sure that it is closed securely.

BEKO DPU8360X - Cleaning the filter drawer - 9

  1. Close the kick plate cover.

BEKO DPU8360X - Cleaning the filter drawer - 10

Drying without the filter drawer sponge in place will damage the machine!
A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption.
A layer can build up on the lint filter pores that can cause clogging of the lint filter after using your machine for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before using it.

Cleaning the evaporator

Clean the lints accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner.

BEKO DPU8360X - Cleaning the evaporator - 1

You can also clean by hand provided that you wear protective gloves. Do not attempt to clean with bare hands.

6 Troubleshooting

Drying process takes too much time.

  • Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
    Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
  • Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any) that block ventilation in front of the ventilation grids.
  • Ventilation is not sufficient since the room where the machine is installed is very small. >> Open the door and window of the room to avoid the room temperature increase too much.
  • Lime deposit has built up on the dampness sensor. >>> Clean the dampness sensor.
  • Excessive laundry is loaded. >>> Do not load the dryer in excess.
  • Laundry is not spun sufficiently. >>>> Spin your laundry at a higher speed in your washing machine.

Laundry comes out wet at the end of drying.

i After drying, the hot clothes feel damper than their actual dampness level.

  • It is likely that the selected programme did not suit the laundry type.>>>Checking the care labels on clothes, select appropriate programme for the laundry type or use timer programmes in addition.
  • Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
  • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
  • Excessive laundry is loaded. >>> Do not load the dryer in excess.
  • Laundry is not spun sufficiently. >>>> Spin your laundry at a higher speed in your washing machine.

Dryer does not switch on or the programme does not start. Dryer does not start when it is set.

It is not plugged in. >>> Make sure that the machine is plugged in.
The loading door is ajar. >>> Make sure that the loading door is closed securely.
- Programme is not selected or the Start / Pause / Cancel button is not pressed. >>Make sure that the programme is selected and the machine is not in Pause mode.
- Childproof Lock is activated. >>> Deactivate the Childproof Lock.

Programme is interrupted without any cause.

  • Loading door is ajar. >>>> Make sure that the loading door is closed securely.
  • There was a power failure. >> Press Start / Pause / Cancel button to start the programme.
    Water tank is full. Drain the water tank.

Laundry has shrunk, become felted or deteriorated.

  • A programme suitable for the laundry type is not used. >> Check the garment tag and select a programme suitable for the fabric type.
Drum lighting does not turn on. (On models with lamp)
• Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on. • Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.
End/Anti-creasing symbol is on.
• Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from creasing. >>> Turn off the dryer and take out the laundry.
End symbol is on.
• Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
• Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
• Filter housing is clogged with lints. >>> Clean the lint filter housing. • A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water. • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Water leaks from the loading door
• Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading door gasket.
Loading door opens spontaneously.
• Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.
Water Tank warning symbol is on/flashing.
• Water tank is full. >>> Drain the water tank. • Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water drain hose.
FilterDrawer Cleaning warning symbol is flashing.
• Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.

BEKO DPU8360X - Laundry has shrunk, become felted or deteriorated. - 1

If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

Sommaire Cliquez un titre pour y accéder
Assistant notice
Powered by Anthropic
En attente de votre message
Informations produit

Marque : BEKO

Modèle : DPU8360X

Catégorie : Sèche-linge