QSN 900 FH - Skrutrekker Gedore - Gratis bruksanvisning og manual
Finn enhetens veiledning gratis QSN 900 FH Gedore i PDF-format.
Brukerspørsmål om QSN 900 FH Gedore
0 spørsmål om dette apparatet. Svar på dem du kjenner, eller still ditt eget.
Still et nytt spørsmål om dette apparatet
Last ned instruksjonene for din Skrutrekker i PDF-format gratis! Finn veiledningen din QSN 900 FH - Gedore og ta den elektroniske enheten tilbake i hendene. På denne siden er alle dokumenter som er nødvendige for bruken av enheten din publisert. QSN 900 FH av merket Gedore.
BRUKSANVISNING QSN 900 FH Gedore
Instruction Part Number
P26630 Issue 3
How to use and care for your Ergo Quickset Adjustable
Torque Screwdriver
Tool Specification
Models: All models
(QSN 40: 0.08 - 0.40 Nm, QSN 120: 0.2 - 1.2 Nm, QSN 600: 1.0 - 6.0 Nm, QSN 900: 4.0 - 9.0 Nm)
Accuracy: +/- 6% of Torque Setting
ISO 6789 Class: Type 2, Class D
Calibration Period: Every 12 Months or 5000 cycles (minimum)
Mechanism: Slipping - Incorrect tightening is impossible
EPA Compliant: All Models
At the set torque, the handle rotates through an angle of 60^ before resetting.
Safety & Maintenance
√ This Torque Tool is a precision instrument and should be used for its
intended purpose only
√ Only hold the tool using the handgrip
√ Always ensure that the tool is in correct alignment with the fastener
√ Torque tools should be regularly calibrated and inspected to ensure correct
operation
√ Ensure the tool is clean and free from oil, grease and water before use
Do not use extension bars to increase the leverage of the handle
✗ Never dip into cleaning fluid or petroleum
How to adjust your Torque Screwdriver
To adjust the torque setting:
Engage the adjusting mechanism by pressing and holding down on the anodised adjusting knob.
To increase torque:
Rotate the handle clockwise until the required torque is selected on the calibrated scale.
To reduce torque:
When adjusting, always approach the required
torque from a lower setting. Rotate the handle anti clockwise passed your
setting, then increase torque to the required
value.
To increase leverage:
Optional lock on T-Bar for larger models of
screwdrivers, provides extra leverage when required. (Order Code P20530)
This fits into the 14 " Square Drive (SD) in
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background (like ruled paper), the OCR result must ignore them. The provided OCR content is "____", which consists of four underscores. This is incorrect because underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line violates the rule and constitutes an error. Therefore, the OCR result is inconsistent with the Ground Truth.
The Ergo Quickset Screwdriver is designed
for use with sockets, screwdriver bits and blades.
on the scale.
[Non-Text]
Servicing Information
Regular servicing of your Torque Tool by competent personnel is important to ensure it continues to perform correctly.