Karlik

13-1-DRS-2 - Ukategorisert Karlik - Gratis bruksanvisning og manual

Finn enhetens veiledning gratis 13-1-DRS-2 Karlik i PDF-format.

📄 1 sider Norsk NO ⬇ Last ned 💬 AI-spørsmål
Notice Karlik 13-1-DRS-2 - page 1
1 / 1
Pick your language and provide your email: we'll send you a specifically translated version.

Brukerspørsmål om 13-1-DRS-2 Karlik

0 spørsmål om dette apparatet. Svar på dem du kjenner, eller still ditt eget.

Still et nytt spørsmål om dette apparatet

E-posten forblir privat: den brukes kun til å varsle deg hvis noen svarer på spørsmålet ditt.

Ingen spørsmål ennå. Vær den første til å stille et.

Last ned instruksjonene for din Ukategorisert i PDF-format gratis! Finn veiledningen din 13-1-DRS-2 - Karlik og ta den elektroniske enheten tilbake i hendene. På denne siden er alle dokumenter som er nødvendige for bruken av enheten din publisert. 13-1-DRS-2 av merket Karlik.

BRUKSANVISNING 13-1-DRS-2 Karlik

ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS

  1. Prepare end of the antenna cable for installation, i.e. strip the wire of the coaxial cable by cutting at the same height the external insulation, over-wrap and the centre of the cable. (picture no. 1)
  2. Unscrew the clamping bolt in the antenna outlet socket (picture no. 2).
  3. Insert the antenna cable so as blade of the socket enters between the over-wrap and the external insulation. Check if the wires of the cable are inserted into the input clamp in a correct way (picture no. 4).
  4. Tighten the clamping bolt in the antenna outlet socket (picture no. 5).
  5. For pass-through sockets - procedure for socket output is the same as for socket input.
  6. Insert the socket into the 60mm installation box and according to the type of box assembly the socket with either the spikes or the fastening screws.
  7. Place the frame with the cap on the main body of the outlet socket..

4,5 ÷ 8,3 mm 0,6 ÷ 1,2 mm 10 mm

PICTURE NO.1

Karlik 13-1-DRS-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 2

natural_image Mechanical assembly diagram showing a clamp holding a component with multiple ports and mounting flanges (no text or symbols)

PICTURE NO.2

Karlik 13-1-DRS-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 3

natural_image Mechanical component diagram showing a housing with mounting flanges and a central shaft (no text or symbols)

PICTURE NO.3

Karlik 13-1-DRS-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 4

natural_image Mechanical assembly diagram showing a motor or gear mechanism with no visible text or symbols

PICTURE NO.4

Karlik 13-1-DRS-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 5

natural_image Mechanical assembly diagram showing a lever mechanism with no visible text or symbols

PICTURE NO.5

NOTE!

Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.

Innholdsfortegnelse Klikk på en tittel for å få tilgang til den
Veiledningsassistent
Drevet av Anthropic
Venter på meldingen din
Produktinformasjon

Merke : Karlik

Modell : 13-1-DRS-2

Kategori : Ukategorisert