Pro Diver 11752 - Laikrodis INVICTA - Nemokama naudojimo instrukcija
Raskite įrenginio instrukciją nemokamai Pro Diver 11752 INVICTA PDF formatu.
Naudotojų klausimai apie Pro Diver 11752 INVICTA
0 klausimas apie šį prietaisą. Atsakykite į tas, kurias žinote, arba užduokite savo.
Užduokite naują klausimą apie šį prietaisą
Atsisiųskite instrukciją savo Laikrodis PDF formatu nemokamai! Raskite savo instrukciją Pro Diver 11752 - INVICTA ir vėl perimkite savo elektroninį įrenginį. Šiame puslapyje skelbiami visi dokumentai, reikalingi jūsų įrenginio naudojimui. Pro Diver 11752 prekės ženklo INVICTA.
NAUDOJIMO INSTRUKCIJA Pro Diver 11752 INVICTA
PRESENTATION
Display Elements
Minute Hand
Hour Hand
Second Hand
Date
natural_image
Illustration of a yellow wristwatch with black strap and two gold buttons (no text or symbols)Control Buttons
Crown Positions:
- Normal position
- Setting of date
- Setting of hour, minute, date
INSTRUCTIONS
MANUAL
NH35A
SETTINGS
Set the Time, Hour, Minute
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set hour/minute hands to the desired time.
1.3 Push the crown back to position 1.
natural_image
Yellow wristwatch with analog clock face and wrist strap (no visible text or symbols)
natural_image
Yellow wristwatch with silver dial and black buttons, no visible text or symbols on the face or body
natural_image
Yellow wristwatch with analog clock face and wrist strap (no visible text or symbols)Set of Date
2.1 Set the crown to position 2.
2.2 Turn the crown clockwise step-by-step to the desired date.
2.3 Push the crown back to position 1.
!! Attention !! Do not set the date between 9:00PM and 4:00A.M. As this will cause a malfunction.
natural_image
Yellow wristwatch with analog clock face and wrist strap (no visible text or symbols)
natural_image
Yellow wristwatch with silver frame and wrist strap, no visible text or symbols on the watch face
natural_image
Yellow wristwatch with silver dial and wrist strap, no visible text or symbols on the watch faceINFO
To wind up the Mainspring
Manual winding - Fully wound up by turning the crown minimum 55 times
– Fully wound up by turning the ratchet wheel screw 8 times
Machine winding – Rotary speed: 30rpm
- Operation time: 60 mintues