GGM-010U - Liimipüstol Ozito - Tasuta kasutusjuhend

KASUTUSJUHEND GGM-010U Ozito

Service Information

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requirements such as maps, spaces and wearings and orders or the guarantee of consumers.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category Example
Wear parts*
Consumables' Glue stick
Missing parts

* Not necessarily included in the scope of delivery!

In the effect of defects or louits, please register the problem on the internet at www.ise.gmbH.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.

Declaration of confirmity

Glue Gun GGM-010U (Ozile)
2014/29/EU	2009/42/EC
2005/92/EC_2008/125/EC	Annex IV
R. 2014/30/EU	SMD AD 2026
2008/29/EC	Reg No.
R. 2014/30/EU	2009/14/EO_2005/8/EO
2014/30/EU	Annex V
2014/30/EU	Annex M
2014/53/EC	Eccles transactifs (AB) (Lumefeld) (B) (A)
2014/89/EC	Pa. EMC (30% cm)
909/86/EC_2008/142/EC	Rus. vity.
88/86/EC_96/85/EC	2008/26/EC
R. 2014/30/EU	Linson No.

GGM-010U

GB Additional operating & safety Instructions Glue Gun

Line drawing of a handheld electric tool labeled 'ozito' (no additional text or symbols)

Danger! Read the operating instructions to reduce the risk of inquiry

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the ISC GmbH.

Subject to technical changes

Items supplied

Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions.

• Open the packaging and take out the equipment with one
  • Remove the packaging material and any
  packaging and/or transportation braces (if available)
  BVerkel(06).
• Check to see if all home are supplied.
• Insect the equipment and accessories
• Reports to equilibrium and accessories for transport damage.
  • If possible, please keep the packaging until
  the end of the guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of coupling or surfacingal.

Proper use

You can use the hot glue gun to glue the following materials: Wood, plastics, textiles, cardboard, ceramics, leather, etc.

The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries at any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voiced if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

Mains connection.....230-240 V \~60 Hz

Power rating 10 W

Temperature.....170-180°C

Glue stick ∅ 7.2 mm

Totally Insulated

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of the no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any accessories or aids without electrical components supplied with the old out-of-ment.