TIMM - RB - Termostaat Vemer - Tasuta kasutusjuhend

KASUTUSJUHEND TIMM - RB Vemer

HONTO-218

Voter S.p.A. 1-2010 - 4th (18) • 7th Camp (inc. 16 e-mail: info@cnepd - www.nacn

User Manual

ADJUSTABLE THERMOSTAT - IMMERSION - WITH SHANK Read all the instructions carefully

■ TINW - R100 and TINW - B200 are based on prior thermotrate, liquid exposure, with varying concentrations. Completes with core histid levels for a biomarker regulation on isolates, pumps and other mixing equipment.

The thermode ray: flucturing is ^1 Infrared light

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED on the USER BENE CONTROLLED before connecting the thermostat. Check that the power input is compatible with the output on the contacts (see the technical detail).

表决权

Model Description

VE305900 TINN - NICC

集美的（2016）第57-100页

VEGETED TIME RATE Maturity: 20%

Dimensions

TECHNICAL DATA

• Salting temp: -31 = +90°C + 25°C
• Monde 40.26
  • Days of production: 140
  • Thermal effect
  • "Компия телк житрате: АГС"
  • Weinntachlurgesing 1100
  • Aktionisch passare: 10 bis
  • Contact vehicle: 16 A 15 250 lbs
• Actisate: IB
• Core high: M2U

INSTALLATION

- ATTENTION only specialized observations or authorized indicators must carry out the instructions given in his leaflet. In full observance of the safety instructions and current applicable legislation.

2. 本说明仅供参考。

A. I seem the same to present the new home in restaurant.

B. Re the top in the corner having 15° threshold

C. Replace the hole on the thermometer inside the heat and height down the flying screen.

D. Slide off the back and above the two screws be reached to open the them or at over.

E. Pass the test through the core grid and make the connections following the diagram below.

Terminal 1 = common Terminal 2 = opens the circuit when the set temperature is reached Terminal 3 = does the circuit when the set temperature is reached

B. Replace the cover, screws and knob.

REFERENCE STANDARDS

Conformity to the BI directive 2014/35/UE (LVD) and 2014/30/UE (ENDC) is certified in reference to the harmonized standards: LN 60730-1, LN 60730-2-9

User Manual

ADJUSTABLE THERMOSTAT - WITH EXTERNAL CAPILLARY

Read all the instructions carefully

■ TMT-R gas is a best computer thermols, lipid exposure, and switching contacts, complete with one white liquid for automatic regulation techniques, pumps and other binding equipment. The thermolol can be found on any surface using the performed line.

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON THE USER BEING CONTROLLED before connecting the thermostal. Check that the power input is compatible with the output on the contacts (see the technical data).

Body

Model

[Non-Text]

At the time of 30°C, the end of the

Dimensions

TECHNICAL DATA

• Soliv: now, -20 = +60°C + 15°C
• Diflunstel ^ C + 2 ^ C
  • Degree of protection. IP 40
  • Inclusion: 1
  • Пеатролет «СИИ»
  • 100000000000000000000000000000000000000
  • Charpe-raminals
  • Corbin's test. 164 pm 250 Vea
  • A## 5 • C###

INSTALLATION

- ATTEMOT 014, one special and electronic or subrational needs used carried out the instructions given in this chapter, in full observance of the safety instructions and current applicable legislation.

CONNECTIONS

A. In any surface using the periculated line

II. Intrams the bulk of the end of the capillary in the liquid (or place it closely reaching the surface) that the

Temperian has to be regular for.

1. Close on the ramp and cut down the two screws of reach to open the thermocrit cover.
2. Pass the leads through the core length and make the connections linking to the diagram below.

E. Rainer the year, some and kind

REFERENCE STANDARDS

Country to the Ill division 2014/35/E (197) and 2014/36/E (FMCC) is ordered in millions to the non-bond bonds P26070-1, P48070-2-9

User Manual

RESETTABLE THERMOSTAT - IMMERSION - WITH SHANK

Read all the instructions carefully

■ RPN - 100 a heat in polar thermal, fluid separation across all cold temperatures only. In addition with increased heat and cooling accuracy. The temperature is low (up to 5 °F) heated by

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON the USER BEING CONTROLLED before connecting the thermologist. Check that the power input is compatible with the output on the contacts (see the technical data).

•

Node

lesziasin

Reversible from research of the

Dimensions

TECHNICAL DATA

• Linear waveforming, 98°C to 45°
- Good enough and positive safety
• Degree of protection P 40
• Inclusion chez:
• Intercultural information
• Maximum bulb temperature: 110°C
• Neuroblast pressure: 10 Hz
- Normally closed contact
• Caractarpers. 15 A (2) 250 Vcs
• Action type: TE

INSTALLATION

• ATTLENTIC: only specialized electricians or authorised installers must carry out the instructions given in this leaflet. In full observance of the safety instructions and current applicable legislation.

CONNECTIONS

A. Lesse le snow to repure le lap from the return.

B. For the top in the corner housing (15" Bending. C. Prices like a bit on the front panel inside the main consideration down the floor survey

1. Replace the step on the thermoidal mode the step and sign down the long screw.
2. Discreve the protection bond of the parallel push button and the below die in open the thermoidal

CAE

E. Pass the leads through the core touch and make the connections showing the diagram below.

Terminal 1 = common

Terminal 2 = opens th

set temperature is reached

(99°C ±4°C)

E. He are the cover, nut and gas.

RESET OPERATION

In several directions of the road, thermocenter (papar industry), and until the system temperature falls within the normal fields. Towards the cause that it is the practical equal of the system. Then process to normally need the thermometer by removing the plastic cap and pushing the button inside the net with a special tool. Finally, across the cap onto the nut.

REFERENCE STANDARDS

Conformity in the RJ direct to 2014-3511E (Mth and 2014-3824-E (PNC)) in declared in reference to the harmonious standards: EN 60730-1, EN 60730-2-0

User Manual

DOUBLE RESETTABLE AND ADJUSTABLE THERMOSTAT - IMMERSION - WITH SHANK

Read all the instructions carefully

- TWA-R2 is a local body or polar thermal, liquid equation, with modeling to test, complete with core thickness. Temperature parameter and safety control with normal soil and power security. The thermal is fixed using a 57 threshold loop.

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON THE USER BENG CONTROLLED before suspecting the thermostat. Check that the power input is compatible with the output or the contacts (see the technical data).

Cride

Nodal

VEGETOO

Description

VEGETOO

加发来FETA

-

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

1

Dimensions

|

TECHNICAL DATA

• Regular temperature setting range: 120 : 192°C (= 3°C)
- Diversified: C = 2
• Unferr post-sec. temperature: +se 0 in °C + Resort manual and rest five select
• Degree of protection. IP40
+ resubtion class 1
• Thema graderl: « Chin
• Akumah Real Imperative: 45°C • Akumah (ab laparone): 110°C
• 'Aetrum sheath pressure. 10 bar
+ Normally closed or change-over contacts
• Contact outputs. 16 A (5) 250 Vcc
• Actor spec. 10

• Canadian RE

- ATTENTION: on a special and electricals or authorized insulators must carry out the instructions given in this leader, in full observance of the sales instructions and current applicable legislation.

COMNECTIONS

A. I often be sure to know that he has been induced

1. Sichan impor te: contat basing!\$ Treding

2. Reduce the steps of the double mechanical made the trap and tighten down the ring screw.

3. Lowering the upper end of the main frame is used and vol. In open, a bit produces one

As it is access to the latter attributes, remove the core and disc. A source of the regulator the mode remains the knob and takes the screw. Then removes the double zinc box.

E. Pass the least Jough the care policies. The retirement is designed to work on our independent

e mals para with the number and the other with the limit or on a single civil with the aggregate

and under-removal system in the following diagram.

E. Replace the cover, screen and arch out and can

LIMITER

Terminal 1 = common

Terminal 2 = opens the circuit when the set

temperature is reached (89°C ≧4°C)

REGULATOR

Terminal 1 = common

Terminal 2 = opens the circuit when the

set temperature is reached

terminal 3 = closes the circuit when the

вс. Temperature is reached

RESET OPERATION

In case of activation of the most thermocidal open contact, wait until the system temperature falls within the normal limits. Remove the causes that to the oven/melted of the system. Then proceed to manually resist the thermocidal microwarp the plastic cap and pushing the button inside the nut with a special lock. Breaks some of the parts for the part

REFERENCE STANDARDS

Contemporary to the Bid executive 2014/05/E L/C and 2014/30/15 ENDD

is declared in reference to the harmonized standards. EN 00730-1, EN 00730-2-9

information to assess pursued to art. 14 of the directive 2012/10 / EU of the europaeum parliament and of the council of 4 July 2012 on works electrical and electronic equipment (WEE)

If the material-in-synthetic solution or the equipment or packaging, this means the product must not be included with other general waste at its end of its working life. The use must take the same product in a neutral waste centre, or which it is retail for purchasing a new item.

Products for disposal can be consigned free of change (without any new purchase obligation to retailers with a sales area of at least 400 m2. If they measure less than 25 cm, an efficient coated waste collection for the environmentally friendly disposal of the used device

of the subsequent reporting, these are the past 10 years having been estimated from the financial institutions, and 2015 is a result, and otherwise the results are not reflecting on the consolidation of estimates.