Karlik

29DPU-2 - Kategooriata Karlik - Tasuta kasutusjuhend

Leidke seadme juhend tasuta 29DPU-2 Karlik PDF-formaadis.

📄 1 lehekülge Eesti ET ⬇ Laadi alla 💬 AI küsimus
Notice Karlik 29DPU-2 - page 1
1 / 1
Pick your language and provide your email: we'll send you a specifically translated version.

Kasutajate küsimused teemal 29DPU-2 Karlik

0 küsimus selle seadme kohta. Vastake nendele, mida teate, või esitage oma.

Esita uus küsimus selle seadme kohta

E-post jääb privaatsuseks: seda kasutatakse ainult selleks, et teavitada teid, kui keegi vastab teie küsimusele.

Veel pole küsimusi. Olge esimene, kes küsib.

Laadige alla juhend oma Kategooriata PDF-formaadis tasuta! Leidke oma juhend 29DPU-2 - Karlik ja võtke oma elektrooniline seade uuesti kätte. Sellel lehel on avaldatud kõik teie seadme kasutamiseks vajalikud dokumendid. 29DPU-2 kaubamärgi Karlik.

KASUTUSJUHEND 29DPU-2 Karlik

ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS

  1. Prepare end of the antenna cable for installation, i.e. strip the wire of the coaxial cable by cutting at the same height the external insulation, over-wrap and the centre of the cable. (picture no. 1)
  2. Unscrew the clamping bolt in the antenna outlet socket (picture no. 2).
  3. Insert the antenna cable so as blade of the socket enters between the over-wrap and the external insulation. Check if the wires of the cable are inserted into the input clamp in a correct way (picture no. 4).
  4. Tighten the clamping bolt in the antenna outlet socket (picture no. 5).
  5. For pass-through sockets - procedure for socket output is the same as for socket input.
  6. Insert the socket into the 60mm installation box and according to the type of box assembly the socket with either the spikes or the fastening screws.
  7. Place the frame with the cap on the main body of the outlet socket..

4,5 ÷ 8,3 mm 0,6 ÷ 1,2 mm 10 mm

PICTURE NO.1

Karlik 29DPU-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 2

natural_image Mechanical assembly diagram showing a clamp holding a component (no text or symbols visible)

PICTURE NO.2

Karlik 29DPU-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 3

natural_image Mechanical component diagram showing a lever mechanism with no visible text or symbols

PICTURE NO.3

Karlik 29DPU-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 4

natural_image Mechanical assembly diagram showing a motor or gear mechanism with no visible text or symbols

PICTURE NO.4

Karlik 29DPU-2 - ASSEMBLY MANUAL OF RTV AND RTV-SAT OUTLET SOCKETS - 5

natural_image Mechanical assembly diagram showing a lever mechanism with no visible text or symbols

PICTURE NO.5

NOTE!

Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.

Sisukord Klõpsake pealkirjal, et sellele juurde pääseda
Juhendi assistent
Toetatud Anthropic
Ootan teie sõnumit
Tooteteave

Kaubamärk : Karlik

Mudel : 29DPU-2

Kategooria : Kategooriata