G250-G50 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free G250-G50 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Gigabyte |
| Model | G250-G50 |
| Form Factor | 2U Rackmount |
| Dimensions (W x H x D) | 438 x 89 x 680 mm |
| Weight | 15 kg (approx.) |
| Power Supply | Dual redundant 800W hot-swap PSUs |
| CPU Support | Intel Xeon Scalable processors (LGA 3647) |
| Memory Slots | 24 x DDR4 DIMM slots |
| Storage Bays | 12 x 3.5" hot-swap SATA/SAS HDD/SSD |
| Expansion Slots | 5 x PCIe 3.0 x16, 1 x PCIe 3.0 x8 |
| Network | 2 x 10GbE SFP+, 2 x 1GbE RJ45 |
| Management | BMC with IPMI 2.0 |
| Operating Temperature | 0°C to 40°C |
| Cooling | 4 x hot-swap system fans |
| Main Functions | High-performance computing, virtualization, data storage |
| Maintenance | Regularly clean dust filters, check fans and temperature |
| Safety Precautions | Follow ESD guidelines, use anti-static wrist strap |
| Spare Parts & Repairability | Hot-swappable HDDs, PSUs, and fans; easy access to DIMMs and CPU |
| General Information | 2U server designed for data centers; supports up to 3TB RAM |
Frequently Asked Questions - G250-G50 GIGABYTE
How to install RAM in the Gigabyte G250-G50?
Open the top cover, locate the DIMM slots. Align the notch on the memory module with the slot and press down firmly until the latches click. Ensure the module is fully seated. Refer to the manual for supported memory configurations.
How to replace a hard drive in the G250-G50?
The G250-G50 supports hot-swap drives. Press the release button on the drive tray, pull the handle to remove the tray, then install a new drive and slide it back in. The system will automatically detect the new drive.
How to configure RAID on the G250-G50?
Enter the RAID BIOS during boot (usually by pressing Ctrl+R or Ctrl+C). Create a RAID array by selecting disks and choosing RAID level. Save configuration and exit. For hardware RAID, ensure the controller is properly installed.
How to update the BIOS on the G250-G50?
Download the latest BIOS from Gigabyte's support website. Copy the file to a USB drive. Boot into the BIOS setup utility and use the Q-Flash or EFI shell to update. Do not power off during the update.
How to reset the administrator password on the BMC?
To reset the BMC password, access the BMC via IPMI or local console. Use the default login (usually admin/admin) or use the 'ipmitool user set password' command. Refer to the BMC user guide.
What is the maximum supported RAM capacity?
The G250-G50 supports up to 3TB of DDR4 ECC memory across 24 DIMM slots. Use registered RDIMMs or LRDIMMs for optimal performance.
How to access the IPMI interface?
Connect the dedicated management port to your network. The default IP is 192.168.1.1 (check label). Open a web browser and enter the IP. Default credentials are admin/admin for first login.
How to replace a power supply unit?
The PSUs are hot-swappable. Unlock the latch, pull the handle to remove the faulty PSU, and slide in a new one until it clicks. Ensure the power cord is connected.
How to clear the CMOS?
Power off the server and unplug all cables. Open the case and locate the CMOS jumper (usually labeled CLR_CMOS). Move the jumper from pins 1-2 to 2-3 for a few seconds, then return. Alternatively, remove the battery for 30 seconds.
What type of processors are compatible?
The G250-G50 supports Intel Xeon Scalable processors (Skylake-SP, Cascade Lake-SP) in LGA 3647 socket. Check the CPU support list on Gigabyte's website for specific models.
User questions about G250-G50 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual G250-G50 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G250-G50 by GIGABYTE.