SWR2100P-10G - Network switch YAMAHA - Free user manual and instructions
Find the device manual for free SWR2100P-10G YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Network Switch |
| Model Number | SWR2100P-10G |
| Ports | 10 x 10/100/1000 Base-T (PoE+), 2 x 1000Base-X SFP Uplink |
| PoE Budget | 130W total, up to 30W per port |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| Dimensions (W x D x H) | 330 x 230 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | Internal 100-240V AC, 50/60 Hz |
| Power Consumption | Max 150W (with PoE load) |
| Management Features | Web GUI, CLI, SNMP v1/v2c/v3, VLAN, QoS, IGMP Snooping, Link Aggregation |
| Security Features | 802.1X, ACL, Port Security, Storm Control |
| Mounting | Rackmountable (1U) with included brackets |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC Class A, RoHS |
| Fanless Design | Yes (silent operation) |
| Maintenance | Clean with dry cloth; no internal user-serviceable parts |
| Spare Parts / Repairability | Contact Yamaha support for replacement parts; device is not field-repairable |
Frequently Asked Questions - SWR2100P-10G YAMAHA
How do I factory reset the Yamaha SWR2100P-10G?
Press and hold the Reset button on the front panel for about 10 seconds until the LED indicators blink. The switch will reboot with factory defaults.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W, with a total budget of 130W for all ports.
How can I access the web management interface?
Connect a PC to one of the switch ports. The default IP is 192.168.0.1. Set your PC to a static IP in the same subnet (e.g., 192.168.0.100) and enter the IP in a web browser.
Does this switch support VLAN?
Yes, it supports 802.1Q VLAN with up to 256 VLAN groups and trunking.
Can I use the SFP ports for uplink?
Yes, the SFP ports support 1000Base-X modules for fiber or copper uplinks and can be used as additional network connections.
How do I update the firmware?
Download the latest firmware from Yamaha's support site. Upload it via the web interface under Maintenance > Firmware Upgrade. Do not power off during upgrade.
What is the default login credentials?
Default username is admin and password is yamaha (or blank). It is recommended to change the password immediately.
Does the switch support SNMP?
Yes, it supports SNMP v1/v2c/v3 for network monitoring and management.
Can I use this switch for IP camera systems?
Yes, the PoE+ ports are suitable for IP cameras (up to 30W per port) and the switch supports IGMP Snooping for multicast traffic.
What should I do if the switch does not power on?
Check the power cord and outlet. Ensure the power supply voltage matches. If still no power, contact Yamaha support for possible hardware failure.
User questions about SWR2100P-10G YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual SWR2100P-10G - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWR2100P-10G by YAMAHA.