Dominion PX2-2146R - Module d'extension Raritan - Free user manual and instructions
Find the device manual for free Dominion PX2-2146R Raritan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Extension Module (Intelligent PDU) |
| Model | Dominion PX2-2146R |
| Brand | Raritan |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.2 x 8.0 x 1.75 in (437 x 203 x 44 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| Input Current | 16 A maximum |
| Output Receptacles | 8 C13 outlets |
| Power Monitoring | Per-outlet metering via LCD display |
| Network Connectivity | Ethernet 10/100 Mbps, RJ-45 |
| Management Protocols | SNMP, HTTP/HTTPS, SSH, Telnet, DHCP |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | UL, cUL, CE, FCC Class A |
| Maintenance | Periodic visual inspection; clean with dry cloth; no user-serviceable parts |
| Repair and Spare Parts | Contact Raritan support; no field-replaceable units |
Frequently Asked Questions - Dominion PX2-2146R Raritan
How do I install the Dominion PX2-2146R in a rack?
Install the PDU using the included rack-mount brackets. Secure it with screws at the front and optionally support the rear. Ensure proper airflow and do not obstruct vents.
How do I connect the PDU to the network?
Plug an Ethernet cable into the RJ-45 port on the front panel. The PDU will obtain an IP address via DHCP by default. Use the LCD display or button sequence to view the assigned IP.
What is the maximum load for the PDU?
The maximum input current is 16 A. Do not exceed this rating. Use the monitoring features to track load per outlet and total.
How do I reset the PDU to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
Can I control individual outlets remotely?
Yes, via the web interface or SNMP. Log in with administrator credentials, navigate to the outlet control page, and toggle outlets on/off.
The LCD display is not showing anything. What should I do?
Check that the PDU is powered on. If the display remains blank, try pressing the ‘Mode’ button to cycle through screens. If still off, contact support.
How do I update the firmware?
Download the latest firmware from Raritan’s website. Access the web interface, go to Maintenance > Firmware Update, and upload the file. Do not power off during update.
What SNMP versions are supported?
SNMP v1, v2c, and v3 are supported. Configure community strings or users via the web interface or CLI.
Can I use the PDU without a network connection?
Yes, the PDU will distribute power even without a network. However, monitoring and remote control require network connectivity.
How do I clean the PDU?
Turn off the PDU and disconnect from power. Use a soft, lint-free cloth slightly dampened with water to wipe the exterior. Do not use solvents or abrasive materials.
User questions about Dominion PX2-2146R Raritan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Module d'extension in PDF format for free! Find your manual Dominion PX2-2146R - Raritan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dominion PX2-2146R by Raritan.