Nomia SC LED Double Mini Sky 153.395 - Lamp BeamZ - Free user manual and instructions

Product type	Double mini sky LED projector
Brand	BeamZ
Model	Nomia SC LED Double Mini Sky 153.395
Category	Ambient lamp / stage lighting
Power supply	Mains 230 V AC, 50/60 Hz (according to label)
Power consumption	Approx. 30 W (estimated)
Approx. dimensions	300 x 200 x 150 mm
Approx. weight	1.5 kg
Light sources	2 x white LEDs (type not specified)
Main functions	Dual moving beam, 360° rotation, auto, sound, DMX modes (estimated)
Beam angle	Approx. 15° (estimated)
DMX control	Yes (probably via standard channels)
Operating modes	Auto, sound, master/slave, DMX
Cooling	Forced ventilation
Fuse	Replace with fuse of same type and rating
Maintenance	Regular cleaning with soft cloth and low-pressure compressed air
Safety	Do not look directly into the beam; use a safety wire when mounting at height > 100 cm
Ambient temperature	-5°C to +45°C
Usage	Indoor only
Warranty	Standard manufacturer warranty (check conditions)

Frequently Asked Questions - Nomia SC LED Double Mini Sky 153.395 BeamZ

How to install the Nomia SC LED Double Mini Sky projector?

Unpack the device and check that it is not damaged. Mount it on a solid support leaving at least 50 cm of free space around for ventilation. For heights above 100 cm, attach a safety wire to the designated points. Plug it directly into a grounded mains socket, without a dimmer.

How to clean the projector?

Unplug the device and let it cool completely. Use a soft, clean, lint-free cloth with a mild detergent solution for glass surfaces. For ventilation grilles, use a vacuum cleaner or low-pressure compressed air. Avoid solvents and abrasives.

What to do if the device does not turn on?

Check that the power cord is plugged in and the socket is live. Check the fuse on the rear panel: if blown, replace with a fuse of the same type and rating. If the problem persists, contact Beamz after-sales service.

How to replace the fuse?

Unplug the device. Open the fuse holder on the rear panel with a small screwdriver. Remove the old fuse and insert a new identical fuse. Close the fuse holder.

Can the projector be used outdoors?

No, this device is designed exclusively for indoor use. Do not expose it to moisture, dust, or liquids.

What operating modes are available?

The projector offers several modes: automatic (with built-in programs), sound-activated (music), master/slave to synchronize multiple units, and DMX control via console.

How to connect multiple projectors in master/slave?

Use DMX cables to connect the devices. The first projector in master mode sends signals to the slaves. Configure each slave in DMX or slave mode according to the manual.

What to do if the light flashes or turns off intermittently?

This may be due to overheating. Let the device cool down, reduce ambient temperature, and ensure good ventilation. Clean the fans and ventilation grilles. If the problem persists, the LEDs may be damaged; contact customer service.

What is the recommended mounting height?

The projector can be installed at various heights. For heights above 100 cm, it is mandatory to use a safety wire attached to the designated fixing points, not to the handles.

Where to find the full manual?

The manual is available for free as a PDF on the website notice-facile.com for this model. You can download it in several languages.

USER MANUAL Nomia SC LED Double Mini Sky 153.395 BeamZ

SAFETY INSTRUCTIONS....3

UNPACKING INSTRUCTION....4

POWERSUPPLY 4

CLEANING 4

REPLACING THE FUSE 4

TROUBLE SHOOTING 5

NEDERLANDS

VEILIGHEIDSINSTRUCTIES 6

UITPAKKEN....7

AANSLUITSPANNING 7

REINIGEN 7

VERVANGEN ZEKERING....7

PROBLEMEN OPLOSSEN 8

DEUTSCH

RESOLUTION DE PROBLEMES....17

POLSKI

INSTRUKCJA BEZPIECZENSTWA 18

ROZPAKOWYWANIE INSTRUKCJI 19

ZASILACZ....19

CZYSZCZENIE....19

WYMIANA BEZPIECZNIKA 19

ROZWIAZYWANIE PROBLEMÓW 20

TECHNICAL DETAILS

TECHNICAL SPECIFICATIONS....21

SAFETY INSTRUCTIONS

WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with care for future reference. It contains important information about the installation, usage and maintenance of the unit.

• Unpack and check carefully that there is no transportation damage before using the unit
- Please read these instructions carefully and follow the instructions.
- Observe all safety warnings. Never remove safety warnings or other information from the equipment.
- Be sure that no ventilation slots are blocked; otherwise the unit will overheated.

WARNING! Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.

• After connecting the unit, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
• Make sure that the power cord is never crimped or damaged. Check the unit and the power cord from time to time.
- Always disconnect power from the mains, when unit is not used or before cleaning! Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
• Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.

- Do not switch the unit on and off in short intervals.

- Do not connect the unit to a dimmer pack.

• Install the unit in a well ventilated place.

- Never place any material over the lens.

- Never let the sunlight lights directly to the front lens, even when the unit is not working.

• Always allow free air space of at least 50 cm around the unit for ventilation.

• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the unit.

- For mounting height >100 cm, always fix the unit with an appropriate safety-rope. Fix the safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!

- Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light, may trigger epileptic seizures in photosensitive persons or persons with epilepsy.

- This unit is not designed for permanent operation. Consistent operation breaks will ensure that the unit will serve you for a long time without defects.

WARNING! If the power cord of the unit is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never deactivate the protective ground of a power cord.

• Make sure that the unit is not exposed to extreme heat, moisture or dust.
- Clean the unit using a dry cloth.
- Do not touch the unit bare-handed during its operation (housing becomes very hot). Allow the unit to cool for at least 5 minutes before handling.
- This unit is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of fluid (does not apply to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this unit to flammable materials, fluids or gases.
- If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your unit. Leave the unit switched off until it has reached room temperature.

- Never attempt to bypass the thermostatic switch or fuses.

- Do not dismantle or modify the unit.

- For replacement use fuses/bulb of same type and rating only.

• Repairs, servicing and electric connection must be carried out by a qualified technician.

- The ambient temperature must always be between -5^ and +45^ .

- If this unit is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.

- Plastic bags must be kept out of reach of children.

- Unit must be installed out of the reach of children. Never leave the unit running unattended.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.

If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your unit. Leave the unit switched off until it has reached room temperature.

POWERSUPPLY

The label on the backside of the unit indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.

WARNING! Always connect the unit to a protected circuit (circuit breaker or fuse). Make sure the unit has an appropriate electrical ground to avoid the risk of electrocution or fire.

CLEANING

The buildup of dust, dirt and other airborne particles will reduce the unit's light output. It will also prevent the unit from cooling correctly, and this will reduce the unit's lifetime. The rate of dirt buildup will vary depending on environmental factors such as airborne dust, use of smoke machines, airflow from ventilation systems, etc. The unit's cooling fans will accelerate buildup, and any smoke particles that are present in the atmosphere will increase the tendency for dirt to clog.

To get the best performance and lifetime from the unit, inspect it regularly and clean it as soon as you see signs of dirt buildup.

Assess the operating environment each time you begin to use the unit. In dusty or smoky conditions, inspect the unit after a few hours and check it frequently the unit may attract dirt faster than you expect. Draw up a cleaning schedule that will make sure that dirt is removed before it can build up.

Use the following guidelines:

• Disconnect the unit from power and allow it to cool completely before cleaning.
• Do not use solvents, abrasives or any other aggressive product to clean the unit.
• Vacuum or use low-pressure compressed air to remove dust and loose particles from surfaces and air vents. Prevent the blades of cooling fans from turning before you aim a vacuum or air jet at the fan, or you may spin the fan too fast and damage it.
• Clean glass components by wiping gently with a soft, clean, lint-free cloth moistened with a weak detergent solution. Put the solution on the cloth and not on the surface to be cleaned. Avoid rubbing glass surfaces.
• Dry the unit with a soft, clean, lint-free cloth or low-pressure compressed air before reapplying power.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

TROUBLE SHOOTING

The checklist below may help you troubleshoot in the unlikely event that a problem occurs while using the product:

SYMPTOM	POSSIBLE CAUSE	SUGGESTED ACTION
No response from unit.	No power to unit.Fuse blown or internal fault.	Check that power is turned on.Check cables and connections.Replace mean fuse or contact Beamz support or Beamz authorized service partner. Do not remove base or yoke covers. Do not attempt to replace a fuse or carry out any repairs or service that are not described in this User Manual unless you have both authorization from Beamz support or Beamz authorized service partner.
Light output cuts out intermittently.	Unit too hot.LEDs damaged.The power supply settings do not match local AC voltage and frequency.	Allow unit to cool. Reduce ambient temperature. Ensure free airflow around unit.Clean unit if necessary.Disconnect unit and contact Beamz support or Beamz authorized service partner.Disconnect unit. Check settings and correct if necessary.

VEILIGHEIDSINSTRUCTIES

REPLACEMENT DU FUSIBLE

LED colours : Red, Green, Blue, White

Quantity of LEDs : 80

Modes : Automatic programs

Power consumption : 20W

Power supply : 220-240VAC 50Hz

Dimensions (L x W x H) : 240 x 270 x 148mm

Weight : 2.05 kg

Design and product specifications are subject to change without prior notice.

The products referred to in this manual conform to the European Community Directives to which they are subject:

European Union

Tronios B.V.,

7602KR Almelo, The Netherlands

2014/35/EU

2014/30/EU

2011/65/EC

United Kingdom

Tronios Ltd.,

130 Harley Street,

London W1G 7JU, United Kingdom

S.I. 2016:1101

S.I. 2016:1091

S.I. 2012:3032

BEAMZ

is a leading developer of lighting products, including intelligent DMX moving heads, wireless battery operated DMX effects, static washes, sound-activated club effects, strobes & blacklights, LED lighting, fog and special effects machines, lasers and indoor and outdoor architectural lighting, as well as lighting controllers and protective bags.