Carlotta BA 1205 - Scale ADE - Free user manual and instructions

Product type	Body composition scale
Brand	ADE
Model	Carlotta BA 1205
Dimensions	330 mm x 320 mm x 25 mm
Maximum capacity	150 kg
Graduation	100 g
Fat mass display resolution	0.1%
Water mass display resolution	0.1%
Muscle mass display resolution	0.1%
Bone mass display resolution	100 g
Number of user memories	10 (P0 to P9)
Age range	8 to 100 years
Height range	80 to 240 cm
Power supply	2 AAA 1.5 V batteries (display) + 4 AAA 1.5 V batteries (scale)
Display	Portable infrared LCD screen
Functions	Weighing, body composition analysis (fat, water, muscle, bone), Step-on function
Communication	Infrared between scale and display
Safety	Not recommended for pacemaker wearers or electronic implants
Care and cleaning	Damp cloth, no solvent or abrasive, do not immerse in water
Warranty	3 years (parts and labor)

Frequently Asked Questions - Carlotta BA 1205 ADE

How does the body composition scale work?

The scale sends a weak electrical current to measure body resistance. Water in muscles conducts current well, while fat blocks it. Combining this measurement with your personal data (age, height, gender), it calculates your body composition: weight, body fat, water, muscle mass, and bone mass.

What are the recommended conditions for use?

Measure yourself if possible at the same time each day, preferably in the morning after going to the bathroom, barefoot and lightly clothed. Avoid measurements after physical exertion, sauna, or a heavy meal for comparable results.

What to do if the screen displays 'Err'?

The 'Err' error may indicate overload (exceeding 150 kg) or a stability issue. Remove the load immediately if overloaded, otherwise make sure you are still and the scale is on a flat surface.

How to install the batteries?

Open the battery compartment under the scale and on the back of the portable display. Insert 4 AAA 1.5 V batteries for the scale and 2 AAA 1.5 V batteries for the display, respecting polarity (+/-).

How to set the time on the portable display?

Press the SET button for 3 seconds. The hour blinks, adjust it with ▲ and ▼, confirm with SET. Then set the minutes in the same way.

How to store my personal data?

Briefly press SET, select a memory slot (P0 to P9) with ▲/▼, confirm. Then choose your gender (male, female, athlete), age, and height. Each step is confirmed with SET. Data is automatically saved.

How to perform a body composition analysis?

Select your personal memory on the display, press SET until '----' appears. Step barefoot onto the scale, positioning yourself on the steel strips. Stay still. Results display successively: weight, % fat, % water, % muscle, and bone mass.

Which weight unit to choose?

On the back of the portable display, a push button UNIT allows choosing between kg, lb (pounds), and st (stones). Select the desired unit before first use.

How to clean the scale?

Use a damp cloth, no solvent or abrasive product. Never immerse the scale in water. Beware of slipping risk if the surface is wet.

Is the scale suitable for pregnant women?

Yes, there is no risk to the fetus, but results are disrupted by water retention during pregnancy. The measurement is therefore meaningless. Also avoid if you wear a pacemaker or any electronic implant.

USER MANUAL Carlotta BA 1205 ADE

You will find these markings on the batteries:
L = The battery contains lithium
AI = The battery contains alkali
Mn = The battery contains manganese

CR (Li): AA (Al, Mn); AAA (Al, Mn)

Safety instructions for lithium batteries (CR2032/CR2430):

1. Lithium batteries are lithium manganese cells. If you do not use the scale over a longer period, you should take out the batteries of the device.
2. Never open the lithium battery, do not put into fire, or expose to shocks because an explosion risk lasts or discharge of poisonous exposure to fumes might possible.
3. Never touch leaked cells with bare hands.
4. When eyes or hands are contaminated, it is essential to rinse with lots of water. You should go to a doctor if skin or eyes are irritated.
5. Dispos cells only completely discharged or protected against polarity reversal wrapped according to your local disposal regulation.
   6.Do not expose the cells to direct solar radiation and store away from heat; otherwise, there is risk of overheating.
6. Maintain a storage temperature of < 40^ .

Disposing of used electrical and electronic equipment:

The symbol on the product or its packaging indicates that this product must not be treated as normal household refuse; rather, you must dispose of it at a collection point for recycling electrical and electronic equipment. You can get further information from your local council, the municipal recycling authorities or the shop where you bought the product.

Yours truly

ADE GmbH & Co.

BODY FAT

BODY WATER

MUSCLEMASS

BONE MASS

BATTERY LEVEL

AUTO OFF

Model Carlotta / BA 1205

with portable Infrared-Display

Instruction Manual

Table of Contents

1. How does the body analyser work? page 2
2. Conditions to use page 2
3. Putting into Service.. page 3
4. Programming / clock time on the portable display ..... page 4
5. Programming / input of personal data page 4
6. Weighing function (only weight measurement) page 5
7. Body Analysis page 5
8. Error Messages page 7
9. Technical Data
   10.Guarantee. page B

Thank you for purchasing this high-quality product made by ADE. You have acquired a set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first time and keep them in a safe place where you can find them whenever you need the information contained in the instructions.

1. How does the body analyser work?

Through this new revolutionary scales you will be able to get information about your body composition with reference to your weight, body fat % body water % muscle mass % and bone mass kg. First of all you have to enter once your personal data like body height, age, gender and sports activity under your selected personal memory location. Afterwards a measurement is as simple as on a normal bathroom scale. You have only to select your personal memory location, step on the scales and within a few seconds your measured values will be indicated. The analysis is based on the measurement of the body's electrical resistance. A low, safe electrical signal passes freely through fluids contained in lean tissue, such as muscle and blood, but meets resistance passing through fat tissue. The body analyser accurately measures the resistance and with reference to your personal data use it to calculate elements of body composition.

2. How to use

If possible the measurement should be done undressed but always barefoot.

By nature a body is subject of fluctuations (for example: loss of water after taking exercise or after a sauna visit, after a meal, etc.). To enable comparable readings it is important to take the measurements as possible always under the same conditions.

In order to ensure that the results of analysis are accurate and consistent, please keep the measurement conditions constant always at the same daytime. In the morning, directly after you've woken up, your body will be dehydrated and also the majority of fluid will be stored in the central trunk area. This means that the resistance is relatively high because of the poor conductivity in the body. By intensity moving during the day progresses the fluid becomes more evenly distributed through the limbs and increasing the accuracy of the readings. To get a realistic result it is important to take your readings at the same time and under the same conditions every day. The easiest way to stick the rule, measure always in the morning, 15 minutes after you've got up, either before or after you've gone to the bathroom.

In spite of a very low electrical signal, this body analyser is not suitable for persons with heart pacemaker or other electronic medical implants. There is no risk for persons with none electronic implant for instance a titanium plate in the knee. However, metal conducts the electric current extremely well and therefore the scale implicates the body fat value "beautiful" - means the actual body fat value is higher as indicated. However, tendencies may be determined as well.

8. Error Messages

"Err*	= Overload display - The 150 kg maximum capacity of the scales has been exceeded. Immediately remove the load from the scales; otherwise, the load cell could be damaged. Or: inaccurate weighing- / measuring process - If the scales, for example, does not stand stable or you do not stand stationary on the weighing platform.
"LO*	= Indication that the battery is flat - Please replace the batteries with the intended 1.5 V type AAA.
"ErL*	= Fat portion % too low - under 5% can not be indicated.
"ErH*	= Fat portion % too high - over 50% can not be indicated.

8. Technical Data

Capacity x graduation: max. 150 kg x 100 g

Display resolution: body fat: 0.1% / body water: 0.1%

Display resolution: muscle mass: 0.1% / osseous mass: 100g

Personal storage spaces: 10

Age: 8-100 years

Body height: 80 - 240 cm
Dimensions: 330 mm x 320 mm x 25 mm

Batteries: 2 x 1.5V AAA display / 4 x 1.5V AAA scales (included)

Subject to technical changes due to further-development of the product.

9. Guarantee

ADE guarantees to rectify any defects due to material or manufacturing defects by means of repair or replacement free of charge for a period of three years. When making a guarantee claim, please return the scales together with the sales slip to your retailer and stating the reasons for the claim.

CE conformity

This device is interference-suppressed in accordance with the applicable EU directive 2004/108/EC

Note: Extreme electromagnetic influences, e.g. when operating radio communication equipment is being operated next to the scales, can affect the displayed value. When the interference is over, you can use the product for its intended purpose again; it may be necessary to switch it on again.

Statutory notice of liability for disposal of batteries:

Batteries are not domestic refuse. As a consumer, you are legally liable to return used batteries. You can return your used batteries to the public collection points in your area or anywhere where batteries of the respective type are sold.

serves the body as energy storage. As essential for women a minimum body fat proportion between 10% and 13% and for men between 10% and 13% is requested with the exception of competitive athletes.

Body fat is not a clear indicator for health. Too high body weight and a too high body fat proportion are linked to the incidence of many civilization diseases such as diabetes, cardiovascular diseases, etc. Lack of movement and improper nutrition are often the prime course for these diseases. There is a obvious direct relationship between overweight and lack of movement.

A significant part of the human body consists of body water. This body water is differently distributed throughout the whole body. Lean muscle tissue contains approx. 75% body water, blood approx. 83% body water, body fat approx. 25% body water and bones have a water content of about 22% .

The average total body water percentage range for healthy men is between 50 - 65%. The equivalent value for women is approximately 45 - 60% due to the higher body fat content. About two third of the total body water is stored in the cells and is therefore called intra cellular. The other third of the total body water is extra cellular body water.

For men, the normal range of body mass index is between 20 and 25, for women 19 to 24. For people in the second half of life a body mass index to 26 is still considered as normal.

Women
AGE	Body Fat				Body Water
	slim	normal	slightly overweight	overweight	normal
10-16	<18%	18-28%	29-35%	>35%	57-67%
17-39	<20%	20-32%	33-38%	>38%	47-57%
40-55	<23%	23-35%	36-41%	>41%	42-52%
56-85	<24%	24-36%	37-42%	>42%	37-47%
Men
AGE	Body Fat				Body Water
	slim	normal	slightly overweight	overweight	normal
10-16	<10%	10-18%	19-23%	>23%	58-72%
17-39	<12%	12-20%	21-25%	>25%	53-67%
40-55	<13%	13-21%	22-26%	>26%	47-61%
56-85	<14%	14-22%	23-27%	>27%	42-56%

There are no validated standards for muscle mass.

Due to menstrual cycle and hormonal changes women experience greater changes in their hydration level. Retaining fluid may cause the weight to fluctuate day-to-day. This will also affect the body fat percentage readings. If the hydration level is high the body fat percentage is slightly less - a less hydration level means the body fat percentage is slightly higher.

There is no healthy risk for pregnancy. The body analyzer is absolutely safe for the mother and her unborn baby. However, due to the changes in water content in the mother's body, the readings should not be interpreted as completely accurate.

ADE Germany takes no responsibility for any damages or losses caused by the use of this body analyzer scales or for Third Party claims. This product is exclusively intended for private use. This product is not designed for commercial or professional use in hospitals or other medical facilities.

3. Putting into Service

Safety guidelines: The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless a person responsible for their safety has given them supervision or instruction concerning use of the appliance. Children should be supervised to ensure that they do not play with the appliance.

Not suitable for persons with electronic implants (heart pacemaker, etc.).

Place the scales on a plane and firm surface (tiles, hardwood flooring, etc.) to avoid a wrong measurement on carpeted floor

Attention - Hazard of slips. Do not stand on the scales with wet feet or on a slippery surface of the weighing platform.

Ensure that no heavy object fall onto the scales; otherwise the scales may be damaged. The glass surface is breakable.

Only use a damp cloth to clean the scales. Never use solvents or abrasive cleaners. Do not put the scale under water.

Preparation: Open the lid of the battery compartment on the bottom of the scales and on the back side of the portable infrared-display and insert the supplied batteries. Please observe the correct polarity of the batteries (+/-).

At the back of the portable display there is a small push button "UNIT" for country specific settings with the option to switch from kg = kilogram to lb = pound or st = stone. Please ensure that the scales are set to the appropriate units of weight for you.

1. Programming of the time in the portable display

For clock time adjustment please take the portable display and utilise the buttons: SET (save button), (minus button), (plus button) and follow the particular points:

1. After the insertion of the supplied batteries the display indicates all characters and then the time 12:00.
2. Press the SET-button for 3 seconds. The hourly announcement in the display catches in to flash. Now choose with the or button the desired hourly setting (0 to 23) and then press the SET-button to save the reading. Then the minute announcement catches in to flash. Choose now with the or button the desired minute setting and confirm this with the SET-button.
3. Programming / Input of personal data

Before the first-time use your personal data like gender (man, woman, man sportily or woman sportily), age and body height under the storage spaces P0 - P9 (for up to 10 people) must be given and be stored. To enter your personal data please take the portable display and utilise the buttons: SET (on- / and save button),▼(minus button),▲ (plus button) and follow the particular points:

1. Press briefly the SET-button. In the announcement flashes "P0". To choose the desired storage space (P0 - P9), press the or button and then press the SET-button to save the reading.
2. After you selected your personal location (e.g., storage space P3), the symbol for gender starts to flash. To select the requested gender (♀ man, ♀ woman, man sportily♂ or woman sportily♂, press the ▲ or ▼ button. After the selection of your gender press the SET-button to save the reading.
3. After you selected your gender (e.g. man), the symbol for age (default age 30) starts to flash. To enter your age press the or button. After the selection for your age press the SET按钮 to save the reading.
4. After you selected your age, the symbol for body height starts to flash (default 165 cm). To enter your body height press the or button. After the selection of your body height press the SET-button to save the reading.

After you have finished the input in the display appear "----" and afterwards "Err!". Now the values given by you are stored and in the display appear again the time.

IMPORTANTLY!

Please, note that with the use of the scales a direct connection exists between the portable display and the scales. No obstacles may be between scales and operating device. The scales work by means of infrared connection and have a limited reach between scales and operating device.

1. Weighing function (only weight measurement)

2. Switch on the scales by using the step-on-function. Just step on the scales. Remain stationary on the weighing platform and do not hold you tight.

3. After the scales have stabilised your weight is indicated successively three times and then for approx. 10 seconds solidly. Afterwards the time announcement appears again.

4. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered before (please see page 4 - 5).

1. Choose on the display your personal storage space by pressure of the SET-button. As soon as "----" appears in the display, the infrared announcement searches the signal to the scales. Please pay absolutely attention to the fact that nothing is between the red LED display of the scales and the indicating instrument; otherwise the display will indicate "Err 1".

2. While "----" is indicated in the display, position yourselves carefully barefoot right and left on the stainless-steel measuring units of the scales and remain stationary.

3. First your weight is indicated. Afterwards, while the body analysis is carried out, runs in the display the signal "o". Furthermore remain stationary. After completion of the measurement your measured values are indicated on the display as follows:

Consistently your body weight in kg
1. Your body fat portion in % (FAI)
2. Your body water in % (IBW)
3. Your muscle mass in % (MUS)
4. Your osseous mass in kg (BONE)

** During the announcement of the body fat portion below in the display appears an

assessment:

= Fat portion too low

= Fat portion in the healthy area

Fat portion raises

= Fat portion too high

The measured values are still indicated 2-times successively, and then appears in the display again the time announcement.

The body fat content is shown as the amount of stored fat as a percentage of total body weight. There is no generally accepted set value as this varies significantly according to gender (due to the different build) and age. Body fat is vital for basic body functions. It's protecting organs, cushioning joints, regulating body temperature, storing vitamins and

Femmes
Âge	Masse graissese corporelle				Massed'eau
	mince	normal	légger surpoids	surpoids	normal
10-16	<18%	18-28%	29-35%	>35%	57-67%
17-39	<20%	20-32%	33-38%	>38%	47-57%
40-55	<23%	23-35%	36-41%	>41%	42-52%
56-85	<24%	24-36%	37-42%	>42%	37-47%
Hommes
Âge	Masse graissese corporelle				Massed'eau
	mince	normal	légger surpoids	surpoids	normal
10-16	<10%	10-18%	19-23%	>23%	58-72%
17-39	<12%	12-20%	21-25%	>25%	53-67%
40-55	<13%	13-21%	22-26%	>26%	47-61%
56-85	<14%	14-22%	23-27%	>27%	42-56%