MS610dn - Printer LEXMARK - Free user manual and instructions

USER MANUAL MS610dn LEXMARK

•DDR3 DIMM
•Mémoire flash

—Polices

-Microcode

•Disque dur *
- ISP (Internal Solutions Ports) *

• Interface parallèle 1284-B
  —Interface fibre optique MarkNet N8130 10/100
• Interface série RS-232-C

Two 3D diagrams showing a device with labeled components, one with green base and blue connectors, the other with a red arrow pointing to a component (no text or symbols present)

3D illustration of a microchip with a green base and black components, connected by wires to a sensor or connector (no text or symbols)

Diagram of a computer RAM module showing green and black components with pin connections (no text or symbols)

Diagram showing two states of a device with red arrows indicating downward motion, labeled ① and ②.

Close-up of a printer's internal panel with a red arrow indicating compression or disassembly (no text or symbols visible)

Diagram showing three steps of a device operation: opening, adding red arrows to the next step, and reducing the rightmost step.

Exploded view diagram of a device showing labeled parts including circuit board, cable, and housing

3D rendering of a green and black mechanical component with a red arrow pointing downward (no text or symbols)

3D rendering of a green electronic component with a red arrow pointing to it, labeled '2' (no text or symbols on the diagram itself)

3D rendering of an electronic device casing with a green internal component and a red circular inset showing a knob (no text or symbols)

3D rendering of a device casing with internal components and a magnified inset showing a red circular arrow indicating rotation (no text or symbols)

3D rendering of an electric vehicle battery pack with a highlighted internal component (no text or symbols visible)

Diagram illustrating four steps of a device operation: opening, adding, removing, and finally adding a component.

Interior view of a computer setup showing an open drive with internal components and a magnified inset highlighting a component (no text or symbols visible)

Interior view of a computer monitor showing internal components and a red arrow indicating a process or operation (no text or symbols present)

Interior view of a computer setup showing an open drive with internal components and a magnified inset highlighting a blue component (no text or symbols visible)

Interior view of a computer monitor showing internal components and a red arrow indicating a process (no text or symbols present)

3D illustration of a hard disk drive assembly with a close-up view showing the internal components (no text or symbols)

Interior view of a computer monitor case showing green internal components and red directional arrows indicating movement (no text or symbols)

Close-up of a computer monitor internal with a green internal panel, showing a close-up of the screen and a red arrow indicating rotation (no text or symbols visible)

Illustration of a hand interacting with a blue 3D block and a wire mesh on a green background, with no visible text or symbols.

Close-up of a computer monitor with a green internal panel and a red circular arrow indicating rotation (no text or symbols)

Illustration of a hand interacting with a blue 3D block and a magnifying glass on a green background, with a red arrow pointing to a blue rectangular component (no text or symbols)

Illustration of a printer with a magnified inset showing a printer's screen and cable (no text or symbols)

Diagram showing a computer with labeled components, including a magnified view of the device and connected cables.

3D rendering of an open printer case with a red arrow pointing to a component (no text or symbols visible)

3D rendering of a white paper printer with a red arrow pointing to its internal structure (no text or symbols visible)

Diagram showing a computer monitor with labeled parts: connection to a power outlet, cable, and a magnified view of the device's internal structure.

Illustration of a computer monitor with a magnified inset showing a close-up of its screen (no text or symbols visible)

Diagram of a printer with numbered parts and an inset close-up view highlighting internal structure.

Technical diagram of a printer with numbered parts and an inset close-up view highlighting internal structure.

Diagram of a server rack with numbered components for identification

3D rendering of a computer tower with an open door and green internal panel, showing a red arrow pointing to the interior (no text or symbols visible)

Green electronic circuit board with labeled components (no text or symbols beyond labels 1, 2)

3D rendering of a printer with a red arrow indicating rotation or motion (no text or symbols)

Exterior view of a printer with a red arrow indicating compression or disassembly (no text or symbols visible)

Diagram of a printer with labeled parts and arrows indicating process flow, showing two numbered steps.

Diagram of a printer's internal structure with numbered annotations highlighting components and directional arrows

Remarques :

Interior view of a printer drawer with two circular insets showing internal components (no text or symbols visible)

Three-step illustration showing a folding or rolling process: cutting, folding, and holding a flat surface with red arrows indicating direction (no text or symbols)

3D illustration of a printer with a red downward arrow indicating compression or disassembly (no text or symbols)

Remarques :

3D rendering of a printer holder with a highlighted component and red arrow indicator (no text or symbols)

6 Insérez le bac.

Illustration of a printer with a paper feed being inserted, showing paper and a red arrow indicating the paper's direction (no text or symbols present)

Diagram showing a printer's internal structure with labeled parts and red arrows indicating motion or flow direction.

Close-up of a printer's internal structure showing paper feed and paper tray, with a red arrow indicating the paper's left side (no text or symbols visible)

Close-up of a printer's paper feed being inserted, showing paper sheet and paper holder (no text or symbols visible)

Diagram showing printer operation with labeled parts and directional arrows indicating motion or flow

Three-step illustration showing a hand holding a device with red arrows indicating rotation or force, next to a close-up of the device's screen (no text or symbols)

Three-step illustration showing hands holding a document with arrows indicating direction (no text or symbols)

Three-step illustration showing hand positioning and folding of a device (no text or symbols)

Illustration of a printer being inserted into a paper, with a magnified inset showing a download icon (no text or symbols present)

Illustration of a printer emitting a paper with a red arrow (no text or symbols visible)

3D rendering of a printer with paper being inserted, showing paper movement arrows (no text or symbols)

Close-up of a printer's front panel with a pen tip and red arrow indicating a drop or action (no text or symbols visible)

Remarques :

Close-up of a printer's front panel with a hand icon and no visible text or symbols

Exterior view of a white computer printer with a close-up inset showing the internal port (no text or symbols visible)

Technical diagram of a printer with numbered parts and magnified view highlighting internal structure

Labeled diagram of a printer internal structure with numbered parts for identification

Interior view of a computer with a red arrow pointing to a device component (no text or symbols visible)

Diagram showing printer internal structure with labeled parts and red arrows indicating process steps

Diagram of an open computer drive showing labeled components: 1, 2, 3, and 4.

Diagram showing two views of a computer with labeled components, highlighting red arrows indicating movement or assembly steps.

Configuration de Forms and Favorites

Icône Description

3D rendering of a printer with a red arrow indicating rotation or refresh (no text or symbols visible)

Exterior view of a printer with a red arrow indicating compression or disassembly (no text or symbols visible)

Diagram of a printer with labeled parts and arrows indicating process flow, showing two numbered steps.

Diagram of a printer's internal structure with numbered annotations highlighting key components

Remarques :

Interior view of a printer drawer with two circular insets showing internal components (no text or symbols visible)

Three-step illustration showing a folding or rolling process: cutting, folding, and holding a flat surface with red arrows indicating direction (no text or symbols)

3D illustration of a printer with a red downward arrow indicating compression or reduction (no text or symbols)

Remarques :

3D rendering of a printer holder with a highlighted component and red arrow indicator (no text or symbols)

6 Insérez le bac.

Illustration of a printer with paper being inserted, showing paper being placed into a drawer (no text or symbols visible)

Diagram of a printer with labeled parts and red arrows indicating motion, showing part 1 and part 2.

Close-up of a printer's internal structure showing paper feed and paper tray, with a red arrow indicating the paper's left side (no text or symbols visible)

Close-up of a printer's paper feed being inserted, showing paper sheet and paper holder (no text or symbols visible)

Diagram showing printer operation with numbered callouts highlighting key components

Three-step diagram showing a hand holding a device with red arrows indicating rotation or force, next to a close-up of the device's screen (no text or symbols)

Three-step illustration showing hands holding a document with arrows indicating direction (no text or symbols)

Three-step illustration showing hand positioning and folding of a device (no text or symbols)

Illustration of a printer being inserted into a paper, with a magnified inset showing a download icon (no text or symbols present)

Illustration of a printer emitting a paper with a red arrow (no text or symbols visible)

3D rendering of a printer with paper being inserted, showing paper movement arrows (no text or symbols)

Close-up of a printer's front panel showing a pen tip and a red arrow indicating compression or dislocation (no text or symbols visible)

Remarques :

Close-up of a printer's front panel with a red prohibition symbol (no text or labels)

Illustration of a printer with a magnified inset showing the internal structure (no text or symbols visible)

Interior view of a printer showing internal components and a magnified view of the printer's internal structure (no text or symbols visible)

3D cutaway view of a printer showing internal components and a green tool, with no visible text or symbols.

Hand holding a black cylindrical device with red directional arrows indicating rotation or movement (no text or symbols)

Two views of a printer internal structure showing internal components and a magnified view of the interior (no text or symbols)

Interior view of a printer showing internal components and a magnified view of the printer's internal structure (no text or symbols visible)

3D cutaway view of a printer showing internal components and a red arrow indicating a component (no text or symbols visible)

Cutaway view of a computer printer showing internal components and a red arrow indicating motion (no text or symbols)

Illustration of a hand using a red tool to adjust or install electronic components, with red arrows indicating direction (no text or symbols present)

3D illustration of a battery pack with a blue internal channel and a red prohibition symbol (no text or labels)

Diagram showing a device's internal structure before and after processing, with no visible text or symbols.

Two views of a printer's internal structure showing internal components and a green directional arrow (no text or symbols)

Exterior view of a white and gray printer with a red arrow pointing to its side panel (no text or symbols visible)

3D illustration of a printer with a red downward arrow placed on top, indicating compression or compression (no text or symbols present)

Illustration showing three-step folding process: holding a device, folding a flat sheet, and holding a folded paper with red arrows indicating rotation.

Diagram of a printer with numbered parts labeled 1 through 6, showing front and back views.

Interior view of a printer showing internal components and a magnified view of the lid (no text or symbols visible)

3D cutaway view of a printer showing internal components and a red arrow indicating a component (no text or symbols present)

3D cutaway view of a printer showing internal components and a red arrow indicating motion (no text or symbols)

3D illustration of a battery pack with a blue insulation and a red prohibition symbol (no text or labels)

3D cutaway view of an open industrial machine showing internal components and a green arrow indicating motion (no text or symbols)

3D cutaway view of an open printer showing internal components with red arrows indicating movement or flow (no text or symbols)

Diagram showing a printer internal structure with green arrows indicating direction, alongside its exploded view (no text or symbols)

Two views of a computer printer internal structure, one showing internal components and the other showing a close-up view (no text or symbols visible)

Interior view of a printer showing internal components and a magnified view of the lid (no text or symbols visible)

3D illustration of a printer internal structure with a red arrow indicating compression or disassembly (no text or symbols present)

3D rendering of a printer internal structure with paper feed and red arrows indicating motion (no text or symbols)

3D rendering of a printer or printer with a paper cutout and red arrows indicating flow direction (no text or symbols)

Illustration of a printer with a paper feed being inserted, showing a red arrow indicating compression (no text or symbols present)

Diagram of a printer with a highlighted component and arrow indicating process (no text or symbols present)

Exterior view of a white printer with paper being inserted, showing paper feed and printer placement (no text or symbols visible)

4 Insérez le bac.

Illustration of a printer with a red arrow indicating compression or disassembly (no text or symbols present)

Exterior view of a printer with visible paper feed and red arrows indicating compression or disassembly (no text or symbols)

3 Insérez le bac.

Close-up of a printer's internal structure with red arrows indicating flow or movement (no text or symbols visible)

Diagram illustrating three-step folding or retraction process with arrows indicating direction of movement

Illustration of a printer printing a sheet of paper with a red arrow indicating the paper's direction (no text or symbols present)

Generic document icon with no text or symbols

Generic document icon with no text or symbols

Blank white document page with a small corner detail (no text or symbols)

Solid black document page with a white corner detail (no text or symbols)

740 New Circle Road NW

Lexington, KY 40550

États-Unis

© 2012 Lexmark International, Inc.

Prohibition sign with red X symbol crossed over a trash bin, indicating no waste or disposal restriction

Taiwan waste dry cell batteries recycle logo notice

According to Article 15 of the Waste Disposal Act in the announcement of Taiwan EPA, the producing or the importing manufacturer is responsible for recycling, clearance, and disposal of dry cell batteries, batteries packaged with products and sold, given, and promoted with products to consumers may be labeled with the recycling mark with the remark "please recycle waste batteries" on the product package, the label, or the product manual. Enclosed please find the waste dry cell batteries recycle logo with the remark. Please give the waste dry cell batteries to a company who has the waste dry cell batteries recycle logo and provides the recycle service in order to have the appropriate process for the waste dry cell batteries.

廢電池請回收

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb.

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Garantie limitée

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user's guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
—Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES.

This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Index

[

documents, impression

embedded solutions effacement 70

Embedded Web Server accès 79

Internal Solutions Port

dépannage 214

installation 18

Internal Solutions Port, installation 18

Internal Solutions Port 214

Port Ethernet 41, 75

port parallèle 41

Port USB 41, 75

PostScript, menu 165