Cisco SFPC1110 - Network card / adapter StarTech.com - Free user manual and instructions

Product Type	Cisco SFP (Small Form-factor Pluggable) transceiver module
Model	Cisco SFPC1110
Brand	StarTech.com
Form Factor	SFP (Small Form-factor Pluggable)
Data Rate	1 Gbps (1000BASE-LX)
Connector Type	Duplex LC single-mode fiber
Wavelength	1310 nm
Maximum Distance	Up to 10 km (6.2 miles) over single-mode fiber
Dimensions (L x W x H)	Approximately 2.2 x 0.5 x 0.4 in (56 x 13 x 10 mm)
Weight	0.1 lb (45 g)
Power Supply	3.3V DC, typical power consumption <1W
Operating Temperature	0°C to 70°C (32°F to 158°F)
Storage Temperature	-40°C to 85°C (-40°F to 185°F)
Compliance	IEEE 802.3z, MSA compliant
Hot-Pluggable	Yes, supports hot insertion and removal
Digital Diagnostics (DDM)	Supports real-time monitoring of optical parameters
Laser Class	Class 1 laser product, safe under normal use
Cleaning	Clean fiber optic connectors with isopropyl alcohol and lint-free wipes
Maintenance	No user-serviceable parts; do not disassemble
Warranty	Lifetime warranty from StarTech.com

Frequently Asked Questions - Cisco SFPC1110 StarTech.com

Is the Cisco SFPC1110 compatible with any brand of network switch?

The Cisco SFPC1110 is designed to be fully compatible with Cisco switches and routers, but it may also work with other brands that follow MSA standards. For non-Cisco devices, compatibility is not guaranteed.

What type of fiber optic cable is required for the SFPC1110?

The SFPC1110 uses a duplex LC connector and requires single-mode fiber (SMF) for distances up to 10 km. It is not compatible with multi-mode fiber.

What is the maximum distance the SFPC1110 can support?

The SFPC1110 supports a maximum distance of 10 km (6.2 miles) over standard single-mode fiber (9/125 µm).

Can I hot-swap the SFPC1110 module?

Yes, the SFPC1110 supports hot-plugging, allowing you to insert or remove the module without powering down the switch, provided the switch also supports hot-swap.

Does the SFPC1110 support Digital Diagnostics (DDM)?

Yes, the SFPC1110 includes Digital Diagnostic Monitoring (DDM) functionality, enabling real-time monitoring of temperature, voltage, laser bias current, and optical power levels.

What is the typical power consumption of the SFPC1110?

The SFPC1110 consumes less than 1 watt of power, operating at 3.3V DC. It is an energy-efficient SFP module.

How do I clean the fiber optic connectors on the SFPC1110?

Use a lint-free cleaning wipe moistened with isopropyl alcohol (70-99%) to gently clean the end faces. avoid touching the connector face. Always use a fiber optic cleaning kit for best results.

Is the SFPC1110 a Class 1 laser product?

Yes, the SFPC1110 is a Class 1 laser product as defined by IEC 60825-1, meaning it is safe under normal operating conditions and does not emit hazardous laser radiation.

What do I do if the SFPC1110 is not recognized by the switch?

First, ensure the module is firmly inserted and the switch supports SFP modules. Check for compatibility, especially in non-Cisco switches. Try a different port or power cycle the switch. If the issue persists, clean the connectors and inspect for damage.

What is the warranty period for the StarTech.com SFPC1110?

StarTech.com offers a lifetime warranty for the SFPC1110. For details, refer to the official warranty policy on their website.

USER MANUAL Cisco SFPC1110 StarTech.com

Cisco Compatible Gigabit RJ45 Copper SFP Transceiver Module - Mini-GBIC with Digital Diagnostics Monitoring

StarTech ID: SFPC1110

Close-up of a metallic electronic device with gold contacts and a label (no readable text or symbols beyond product name)

The SFPC1110 Cisco Compatible Gigabit RJ45 Copper SFP Transceiver Module (Mini-GBIC) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a copper Ethernet port on your 1000 Base-T networking equipment.

Featuring Digital Diagnostics Monitoring support and 1000 Mbps Auto-negotiation at distances up to 100m (330 feet), this Ethernet SFP module can be installed into any fiber networking devices with an MSA or Cisco compliant SFP port. Delivering convenience and scalability, this copper transceiver is fully hot-pluggable, allowing you to install the module without interrupting network traffic or requiring a device reboot.

This SFP module is compatible with the Cisco SFP-GE-T transceiver.

Backed by a StarTech.com lifetime warranty and free lifetime technical support.

Applications

• Replacing defective or damaged SFPs in MSA compliant or Cisco equipment
• Expand your network to remote segments

Features

• Up to 1.25 Gbps bi-directional communication
  • 1000 Mbps Auto-Negotiation
• Complies with SFP Multi-Source Agreements standards (MSA)
  • RJ45 Ethernet connector
  • Digital Diagnostics Monitoring support
• Fully Hot Pluggable
  • Auto crossover (MDI / MDI-X) detection
  • Compatible with Cisco equipment

Technical Specifications

Warranty Lifetime

Industry Standards IEEE 802.3ab 1000BASE-T

Auto MDIX Yes

Compatible Networks 1000 Mbps (1 Gbps)

DDM Yes

Max Transfer Distance 100 m (328 ft)

Maximum Data Transfer Rate 1.25 Gbps

Local Unit Connectors 1 - RJ-45 Female

Humidity 30\~70% RH

Operating Temperature 0°C to 70°C (32°F to 158°F)

Storage Temperature -40°C to 85°C (-40°F to 85°F)

Product Height 0.5 in [13 mm]

Product Length 2.8 in [70 mm]

Product Weight 0.7 oz [21 g]

Product Width 0.5 in [13 mm]

Shipping (Package) Weight 0.1 lb [0.1 kg]

Included in Package 1 - 10/100/1000 Mbps RJ45 SFP

Certifications, Reports and Compatibility

RoHS Compliant Available