W72449 - Alarm clock radio LA CROSSE TECHNOLOGY - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	La Crosse Technology
Model	W72449
Dimensions (Approx.)	5.5 x 3.5 x 2.5 inches
Weight (Approx.)	0.5 lbs
Power Source	AC adapter (included) or 2 AA batteries (not included)
Radio Band	AM/FM
Alarm Sound Options	Radio, buzzer, or beep
Snooze Function	Yes, 9 minutes
Display Type	LED digits with adjustable brightness
Clock Format	12-hour or 24-hour selectable
Battery Backup	Preserves time and alarm settings during power outage
Alarm Settings	Weekdays, weekends, or daily
Radio Presets	Up to 10 stations
Care Instructions	Wipe with a soft, dry cloth. Do not use abrasive cleaners.
Safety Precautions	Keep away from water and moisture. Do not open the device.
Spare Parts Availability	Contact La Crosse Technology for replacement parts
Repairability	Not user-serviceable; refer to qualified technician
Country of Origin	China
Warranty	Limited 1-year warranty

Frequently Asked Questions - W72449 LA CROSSE TECHNOLOGY

How do I set the time on my La Crosse Technology W72449 alarm clock?

Press and hold the TIME button for 3 seconds until the hour flashes. Use the + or - buttons to adjust the hour. Press TIME again to set the minutes, then adjust with +/-. Press TIME once more to confirm.

How do I set the alarm?

Press and hold the ALARM button until the alarm time flashes. Use +/- to set the hour and minutes. Press ALARM to confirm. Toggle the alarm on/off by pressing ALARM briefly.

How do I switch between 12-hour and 24-hour time format?

While setting the time, after setting the minutes, press the + button repeatedly to toggle between 12H and 24H. Confirm by pressing TIME.

How do I tune the radio and save presets?

Press the MODE button to select radio. Use +/- to scan frequencies. To save a preset, press and hold a number button (1-10) until the display shows 'P' and a number.

Why is the display dim or not showing?

Check if the AC adapter is properly connected or the batteries are fresh. Adjust the display brightness by pressing the DIMMER button (if available) or refer to the manual.

How do I enable/disable the snooze function?

When the alarm sounds, press the SNOOZE button (usually the top bar) to snooze for 9 minutes. To disable snooze, press any other button to stop the alarm. Snooze is always active by default.

Can I use the alarm clock without batteries?

Yes, the clock works with the included AC adapter. Batteries are only needed for backup to maintain time and alarm settings during a power outage.

How do I clean the clock?

Unplug the device and use a soft, dry cloth to wipe the surface. Avoid using liquids or abrasive cleaners that may damage the electronic components.

What should I do if the clock does not turn on?

First, ensure the AC adapter is securely connected to both the clock and a working outlet. If using batteries, check they are fresh and inserted correctly. If still not working, contact La Crosse Technology support.

How do I reset the clock to factory settings?

Remove all power sources (AC adapter and batteries) for 10 seconds, then reinsert batteries and reconnect the adapter. The clock will reset to default time and alarm settings.

USER MANUAL W72449 LA CROSSE TECHNOLOGY

Warranty and Support

This product is warranted to be free from defects in material and workmanship under normal use and service for a period of one year from the date of sale to the customer. Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect that is covered by this warranty arises during the warranty period, promptly return the clock (postage prepaid) with proof of purchase showing the date the clock was purchased to the following address and such defects will be repaired, or the products will be replaced at La Crosse Clock Company option without charge.

La Crosse Clock Company

Warranty Department

2830 South 26 ^™ Street.

La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

Patents: www.lacrossetechnology.com/pages/patents

Care and Maintenance

• Always purchase the correct size and grade of battery most suitable for intended use.
- Clean the battery contacts and also those of your clock prior to battery installation.
- Ensure the battery is installed with correct polarity (+ and -).
- Remove battery from equipment when it is not used for an extended period of time.
- Promptly remove an expired battery.

This product can expose you to chemicals including acrylonitrile, 1,3-butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

Made in China - Printed in China

LA CROSSE CLOCK CO.

Metal Twin Bell Analog Alarm Clock

Black analog alarm clock with gold tarride and 'LA CROSSE CLOCK CO' branding (no additional text or symbols)

Model: W72449

DC: 101323

Power up

1. Insert 1 fresh AA battery into your clock according to the polarity markings.

2. Turn the Time Set Knob to set your time.

Alarm ON/OFF Switch Time Set Knob Alarm Set Knob Battery Compartment

Time Alarm

1. Turn the Alarm Set Knob to set alarm time.
2. Move the Alarm ON/OFF switch up to activate your alarm.
3. Move the Alarm ON/OFF switch down to deactivate your alarm.

Let's Be Social!

Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, & X (Twitter).

Specifications

Battery Requirements: 1 AA (IEC LR6) Alkaline battery

Battery life: Over 12 months

Movement: Step

Dimensions: 4.57" W x 2.57" D x 6.5" H (11.6cm W x 5.5cm D x 16.5cm H)

4.57" LA CHROSSE 6.50"