Omada DS111P - Schalter TP-LINK - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts Omada DS111P TP-LINK als PDF.
| Produkttyp | Managed PoE+ Switch |
| Modell | Omada DS111P |
| Marke | TP-Link |
| Anzahl der Ports | 8 Gigabit PoE+ Ports + 2 SFP Slots |
| PoE-Budget | 120 W |
| Schaltkapazität | 20 Gbit/s |
| MAC-Adresstabelle | 8K |
| Verwaltung | Omada SDN, Web, CLI, SNMP |
| VLAN-Unterstützung | 802.1Q VLAN, VLAN-Gruppierung |
| Quality of Service (QoS) | Portbasiert, 802.1p, DSCP |
| Sicherheit | 802.1X, ACL, Storm Control |
| Abmessungen (B x T x H) | 171 x 158 x 45 mm |
| Gewicht | 0,6 kg |
| Stromversorgung | 48 V DC (Netzteil im Lieferumfang) |
| Leistungsaufnahme | Max. 130 W (inkl. PoE) |
| Lüfter | 1 x lüfterlos |
| Betriebstemperatur | 0 °C bis 50 °C |
| Luftfeuchtigkeit bei Betrieb | 10 % bis 90 % (nicht kondensierend) |
| Reinigung und Pflege | Mit trockenem Tuch reinigen; keine Flüssigkeiten verwenden. |
| Sicherheitshinweise | In gut belüfteter Umgebung installieren; vor Feuchtigkeit schützen. |
| Reparatur und Ersatzteile | Nicht vom Benutzer reparierbar; wenden Sie sich an den Support. |
Häufig gestellte Fragen - Omada DS111P TP-LINK
Benutzerfragen zu Omada DS111P TP-LINK
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Schalter kostenlos im PDF-Format! Finden Sie Ihr Handbuch Omada DS111P - TP-LINK und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. Omada DS111P von der Marke TP-LINK.
BEDIENUNGSANLEITUNG Omada DS111P TP-LINK
Wall Mounting Guide
Wall Mountable Switches
1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
- A screw driver.
- Two screws which complies to the corresponding standard. For details, see Wall Mounting Specification.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the switch on the wall. Note that the switch should be mounted on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/TL-SG1008P, the switch should be mounted with the ports facing downward and the LEDs facing upward.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks must be the same as that between the two mounting holes of the switch. For the wall-mounting-holes distance, see Wall Mounting Specification.
3) Drive the screws into the wall at the marks using the screw driver. For the Screw-Head-to-Wall Minimum Distance, see Wall Mounting Specification.
4) Mount the switch on the wall.
1.3 Wall Mounting Specification
| Model | Screw Standard of ANSI B1.1 | Minimum Length of Screw | Screw-Head-to-Wall Minimum Distance | Wall-Mounting-Holes Distance |
| DS105G | 4#, (5#), 6#, 8# 7.5mm | 1.5mm 39mm | ||
| DS105GE | 4#, (5#), 6# | 7.5mm | 1.5mm 52mm | |
| DS105G-M2 4#, (5#), 6# | 7.5mm | 1.5mm 52mm | ||
| DS105GP | 4#, (5#), 6#, 8# 8.5mm | 1.5mm 39mm | ||
| DS105X 4#, (5#), 6# 7.5mm 1.5mm | 150mm | |||
| DS106GPP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm | ||||
| DS106P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm | ||||
| DS108G 4#, (5#), 6#, 8# 7.5mm 1.5mm 94mm | ||||
| DS108GE | 4#, (5#), 6# | 7.5mm | 1.5mm | 110mm |
| DS108G-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm | 110mm |
| DS108GP | 4#, (5#), 6#, 8# | 8.5mm 1.5mm 94mm | ||
| DS110GMP | 4#, (5#), 6# 8.5mm 1.5mm | 150mm | ||
| DS11P | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| DS116GE4#, (5#), 6# 8.5mm | 1.5mm 200mm | |||
| ES205G | 4#, (5#), 6# | 11mm | 4.5mm | 52mm |
| ES205GP | 4# | 10mm | 4.5mm | 39mm |
| ES210GP | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| LS1005G | 4#, (5#), 6# | 8.5mm | 2.5mm | 38mm |
| LS1008G | 4#, (5#), 6# | 8.5mm | 2.5mm | 48mm |
| LS105G | 4#, (5#), 6# | 7.5mm | 1.5mm | 76mm |
| LS105GP | 4#, (5#), 6# | 7.5mm | 1.5mm | 65mm |
| LS105LP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| LS106LP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| LS108G | 4#, (5#), 6# | 7.5mm | 1.5mm | 65mm |
| LS108GP | 4#, (5#), 6# | 7.5mm | 1.5mm | 65mm |
| LS109P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 105mm |
| LS1210GP | 4#, (5#), 6# | 7.5mm | 1.5mm | 150mm |
| S4500-16GP | 4#, (5#), 6# | 8.5mm | 1.5mm | 200mm |
| S4500-8G | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| S4500-8GP | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| S4500-8GP2F | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| SG2008 | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| SG2008P | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| SG2016P | 4#, (5#), 6# | 8.5mm | 1.5mm 200mm | |
| SG2210P | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| SG2210XMP-M2 | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| T1500G-8T | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| TL-RP108GE | 4#, (5#), 6# | 8.5mm | 1.5mm | 65mm |
| TL-SF1005LP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| TL-SF1005P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| TL-SF1006P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| TL-SF1008LP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm 105mm | |
| TL-SF1008P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm 105mm | |
| TL-SF1009P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm | ||||
| TL-SF1016D | 4#, (5#), 6# | 9mm | 3mm | 157.2mm |
| TL-SG1005D 4# 10mm 4.5mm 60mm | ||||
| TL-SG1005LP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| TL-SG1005P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| TL-SG1005P-PD | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| TL-SG1006PP | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| TL-SG1008D | 4# | 10mm | 4mm | 100mm |
| TL-SG1008P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 105mm |
| TL-SG105 | 4#, (5#), 6#, 8# | 7.5mm | 1.5mm | 39mm |
| TL-SG105E | 4#, (5#), 6# | 7.5mm | 1.5mm | 52mm |
| TL-SG105-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm | 150mm |
| TL-SG105MPE | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 39mm |
| TL-SG105PE | 4#, (5#), 6#, 8# | 7.5mm | 1.5mm | 39mm |
| TL-SG105PP-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm | 150mm |
| TL-SG105S | 4#, (5#), 6#, 8# | 7.5mm | 1.5mm | 39mm |
| TL-SG105S-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm | 52mm |
| TL-SG108 | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| TL-SG108E | 4#, (5#), 6# | 7.5mm | 1.5mm | 110mm |
| TL-SG108-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm | 150mm |
| TL-SG108PE | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 94mm |
| TL-SG108S 4#, (5#), 6#, 8# | 7.5mm | 1.5mm 94mm | ||
| TL-SG108S-M2 | 4#, (5#), 6# | 7.5mm | 1.5mm 110mm | |
| TL-SG116 | 4#, (5#), 6# | 8.5mm | 1.5mm 200mm | |
| TL-SG116E | 4#, (5#), 6# | 8.5mm | 1.5mm 200mm | |
| TL-SG116P | 4#, (5#), 6# | 8.5mm | 1.5mm 200mm | |
| TL-SG1210MP | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| TL-SG1210MPE | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| TL-SG1210P | 4#, (5#), 6# | 7.5mm | 1.5mm 150mm | |
| TL-SG1210PP | 4#, (5#), 6# | 7.5mm | 1.5mm 150mm | |
| TL-SG2008 | 4#, (5#), 6# | 8.5mm | 1.5mm 150mm | |
| TL-SG2008P | 4#□□5#□□6# | 8.5mm | 1.5mm | 150mm |
| TL-SG2016P 4#□□5#□□6# 8.5mm 1.5mm 200mm | ||||
| TL-SG2210P | 4#□□5#□□6# | 8.5mm | 1.5mm | 150mm |
| TL-SG605 | 4#, (5#), 6#, 8# | 7.5mm | 1.5mm | 39mm |
| TL-SG605E | 4#, (5#), 6# | 7.5mm | 1.5mm | 52mm |
| TL-SG605P | 4#, (5#), 6#, 8# | 7.5mm | 1.5mm | 39mm |
| TL-SG608 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm | ||||
| TL-SG608E | 4#, (5#), 6# | 7.5mm | 1.5mm | 110mm |
| TL-SG608P | 4#, (5#), 6#, 8# | 8.5mm | 1.5mm | 105mm |
| TL-SL1311MP | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| TL-SL1311P | 4#, (5#), 6# | 8.5mm | 1.5mm | 150mm |
| TL-SX105 | 4#, (5#), 6# | 7.5mm | 1.5mm | 150mm |