AVS-21 - Nicht kategorisiert PAC - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts AVS-21 PAC als PDF.
Benutzerfragen zu AVS-21 PAC
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Nicht kategorisiert kostenlos im PDF-Format! Finden Sie Ihr Handbuch AVS-21 - PAC und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. AVS-21 von der Marke PAC.
BEDIENUNGSANLEITUNG AVS-21 PAC
Introduction & Features
The AVS-21 is a two way A/V switcher designed for use with any of the PAC BCI interfaces. The AVS-21 can also be used as a stand alone unit for any application requiring a two way A/V switch.
Important Notes
- The A/V output will pass the A/V 1 input at all times until the module is triggered.
- The module can be triggered by either a positive or negative trigger, however when used with a BCI module it will always be a positive trigger.
Installation Steps
- The black and red wires in the 2-pin plug are the trigger wires. If you are using the AVS-21 with a BCI interface you will connect the black wire to ground and the red wire to the red programmable output wire on the BCI interface. If you are using the AVS-21 in any other application, you can connect the red and black trigger wires to best suite your needs.
- Connect the RCAs labeled "A/V1 IN" to the primary A/V source.
- Connect the RCAs labeled "A/V2 IN" to the secondary A/V source.
- Connect the RCAs labeled "A/V OUT" to the screen/head unit.
Pacific Accessory Corporation® | Ph. 866-931-8021 | support@pac-audio.com
©2015 Pacific Accessory Corporation
www.pac-audio.com
Rev. 040815
text_image
PACAVS-21
Two-Way Audio/Video Switcher
Introduction & Features
The AVS-21 is a two way A/V switcher designed for use with any of the PAC BCI interfaces. The AVS-21 can also be used as a stand alone unit for any application requiring a two way A/V switch.
Important Notes
- The A/V output will pass the A/V 1 input at all times until the module is triggered.
- The module can be triggered by either a positive or negative trigger, however when used with a BCI module it will always be a positive trigger.
Installation Steps
- The black and red wires in the 2-pin plug are the trigger wires. If you are using the AVS-21 with a BCI interface you will connect the black wire to ground and the red wire to the red programmable output wire on the BCI interface. If you are using the AVS-21 in any other application, you can connect the red and black trigger wires to best suite your needs.
- Connect the RCAs labeled "A/V1 IN" to the primary A/V source.
- Connect the RCAs labeled "A/V2 IN" to the secondary A/V source.
- Connect the RCAs labeled "A/V OUT" to the screen/head unit.
