LC-04C - Ladegerät Luminair - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts LC-04C Luminair als PDF.
Benutzerfragen zu LC-04C Luminair
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Ladegerät kostenlos im PDF-Format! Finden Sie Ihr Handbuch LC-04C - Luminair und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. LC-04C von der Marke Luminair.
BEDIENUNGSANLEITUNG LC-04C Luminair
This manual contains important safety and operating instructions. Please read the entire manual before using this product.
I. Product features
- Charge ALL lithium batteries (3.6/3.7V & 7.2/7.4V) for personal portable devices such as Cell phones, Digital Cameras, Camcorders, MP3/4 players, PDAs, GPS system, Blue tooth devices, iPod/ iPhone via 5V USB port and AA/AAA Ni-MH batteries.
- Automatic Polarity Detection. Fast/trickle charge and maintain in full charge.
- Built-in safety protection features to avoid "over voltage", "short circuit", and "over-charge".
II. Important Safety Instructions
- Do not expose charger to moisture, water, rain, or snow.
- Avoid using extension cord unless absolutely necessary. Use of improper extension cord may result in risk of fire and electric shock.
- Do not disassemble charger, or the warranty is voided. Incorrect reassembly may result in risk of fire or electrical shock.
III. To charge Lithium Battery in the tray
- Do Not make contact with © or "T" terminal, if any, on the battery. It will damage the battery.
-
Place the battery in the charger tray.
-
Make contact with “+” and “-” charging terminals on the battery by adjusting the charging pins. With “Intelligent polarity detection” feature, the charger will automatically switch to correct polarities and start charging.
-
Connect the charger to the AC power outlet, the first LED will light up and start charging.
-
Depending on the remaining power in the battery, the second LED will start flashing, followed by the third and the fourth. The battery is fully charged when all LEDs are solid.
-
If charging in vehicle, now you can plug in the 12V Car charging cord to start charging.
If the battery is correctly connected but not charging, it's an indication of the battery being either in dormant status or exhausted.
IV. Charging Ni-MH Batteries
- Simply place the NiMH batteries in correct polarity and start charging.
V. To charge devices via USB port
- Simply connect the device to the USB port.
PO Box 5831
Hac. Hts., CA91745