ZEN CAN - Empfänger iFi Audio - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts ZEN CAN iFi Audio als PDF.
Benutzerfragen zu ZEN CAN iFi Audio
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Empfänger kostenlos im PDF-Format! Finden Sie Ihr Handbuch ZEN CAN - iFi Audio und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. ZEN CAN von der Marke iFi Audio.
BEDIENUNGSANLEITUNG ZEN CAN iFi Audio
ZEN CAN
Thank you for purchasing the CAN from ZEN series. The CAN is a balanced audio amplifier.
1. Power switch
Press and hold button for two seconds to turn on.
2. Input channel switch
Use the button to choose between the following input options Input 1: RCA
Input 2: Single-ended 3.5mm
Input 3: Balanced 4.4mm
3. Gain selection: 0dB/6dB/12dB/18dB
Always start from 0dB and then increase the gain level to attain an enjoyable and comfortable level of volume from the headphones.
Warning, at the outlet do not use excessive gain, otherwise damage to head/leg or connected headphones may arise. ADP01/audy is not responsible for any damage/injury from misuse.
4. Analogue Volume Control
At normal listening levels, the volume control should be around the 12 o'clock position. Increase the gain level to enjoy a higher listening level
5. Single-ended 6.3mm output
For connecting single ended 6.3mm headphones. With single ended 3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.
6. Balanced 4.4mm analogue output
For connecting balanced 4.4mm headphones.
Tax As ZDPCAS is obtained, we recommend the 4-4cm wapul.
7. XBass ^® LED
XBass* (On/Off) was uniquely designed to extend bass response to suit different headphones. It is a pure analogue signal circuit.
8. 3D® Matrix LED
The 3D ^® Matrix (on/off) recreates a halographic sound field. It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to speakers. This addresses the 'music inside the head' sensation, which makes for unsettling listening.
Tip. Schemically dividing DSP is HOT used for XBase® non 3D™ matrix systems. They use the highest quality of these components and operate parts in the workplace domain. Items at any country and resolution of the new product are extracted.
9. Settings
This button chooses between:
Off
3D
XBass"
10. Balanced 4.4mm analogue input
This is a balanced analogue input.
11. Single-ended 3.5mm input
For connecting single-ended 3.5mm input.
12. RCA analogue input
This is an analogue input.
13. Balanced 4.4mm analogue output
This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker.
The 1st ZEN C/W is balanced, this is the recommended output.
14. DC 5V power
Please connect ZEN CAN to the enclosed power supply.
ZEN CAN must ONLY be powered by 5 volts.
In the best performance of the end of the most popular in a superstitut
Specifications
Input voltage: DC 5V/2.5A
AC 100-240V, 50/6GHz iPower supply included
Max Output
Balanced: >15.19/386 mW (≈ 600 Chm)
11.3671850 mV (μ 64 Chm)
56.20/1203 mm 7/8 32 Ohm;
27.4V/870 mV (e-54 Chm)
7.2V/1600 mW/g 32 Ohm
THD & N:
Balanced ×0.005% (e 160 mW/2.4V 16 Ohm)
SE <0.005% (≥ 100 mV/1.27V 16 Ohm)
SNR
Balanced >120dB(A) (5.2V)
SE >118aBA1276V
Max. Inp
Inscribed: 7.0% RVS
BCN 3.8V FME
3.5mm 1.02V RMS
Gain: 148, 648, 1268 and 1968
Frequency Response: 10Hz, 200kHz, 34Hz
Power consumption: No. 5014, S4
May 5/19
Dimensions: 158×117×35mm
n2×4n×14
Net weight:
What is mind.
warranty period: 12 months
ifi-audio.com
Ver1.3