900WCSII - Beleuchtung Ledgo - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts 900WCSII Ledgo als PDF.
| Produkttyp | LED-Studioleuchte |
| Modell | 900WCSII (LG-900CSC) |
| Marke | Ledgo |
| Anzahl LEDs | 900 Stück |
| Gesamtleistung | 54 W |
| Eingangsspannung (AC) | 100 V - 240 V |
| Gleichspannung (DC) | 15 V |
| Farbtemperaturbereich | 3200 K - 7500 K (einstellbar) |
| Dimmung | 0-100 % stufenlos für 3200K und 5600K getrennt |
| Barn Doors | Ja, verstellbar |
| Halterung | U-Bügel mit Klemmschrauben |
| Digitales Display | Ja, für Helligkeit und Adresscode |
| Fernbedienung | Kompatibel mit LEDGO 2,4G (optional) |
| Batterieplatte | Sony V-Lock oder Panasonic/Anton (optional) |
| Mitgelieferte Filter | Diffusor, Extrasoft-Diffusor, Blaufilter |
| Filterhalter | Ja, für Filter und Diffusor |
| Netzteil | Ja, AC/DC-Adapter |
| Betriebsbedingungen | Trocken und belüftet, nach Gebrauch ausschalten |
| Garantie | Herstellergarantie (siehe Handbuch) |
| Hersteller | LEDGO TECHNOLOGY LIMITED, Guangdong, China |
Häufig gestellte Fragen - 900WCSII Ledgo
Benutzerfragen zu 900WCSII Ledgo
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Beleuchtung kostenlos im PDF-Format! Finden Sie Ihr Handbuch 900WCSII - Ledgo und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. 900WCSII von der Marke Ledgo.
BEDIENUNGSANLEITUNG 900WCSII Ledgo
Instructions:
- Mount the lighting on a light stand with a suitable direction, unfold the barn doors and then connect with power. If power is standalone Li-ion battery, please check if the standalone Li-ion battery is securely installed onto the battery plate and in normal condition before use.
This series of lightings can be matched with LEDGO 2.4G remote controller for remote control(bought additionally if needed).
- LG-600CSC, LG-900CSCLG-1200CSC. Please insert diffuser or filter from upside (As below pictures).

text_image
Insert from upside gently-
Switch on and dim according to different shooting conditions. Light direction can be adjusted through the two clamping screws that fix the panel with the U-bracket.
-
Switch off after use.
? Notice:
- Dampness causes a shot circuit. Please place the product where it is dry and ventilated.
- Please turn off after use, so as to avoid waste of battery power and longtime heat generation, and further shorten the service life of the LED lamps.
- Li-ion battery should be recharged in time.
- Please install Li-ion battery as gently as possible to avoid damage and distortion of the battery plate.
LEDGO TECHNOLOGY LIMITED
Add: Zhanglin Section, Highway 324, Dongli, Chenghai, Shantou City, Guangdong Province, China
Tel:0086-754-85354187 Fax:0086-754-85300887
E-mail:info@ledgo.hk http://www.ledgo.hk
LG-600CSC.LG-900CSC.LG-1200CSC Studio LED Light
Instruction Sheet
Extra Parameters:

LED Bulbs Amount: 600 PCS
Total Power: 36W
AC Power: 100V-240V
DC Power: 15V
Color Temperature: 7500K-3200K
Filter: 1 SET
LG-900CSC

LED Bulbs Amount: 900 PCS
Total Power: 54W
AC Power: 100V-240V
DC Power: 15V
Color Temperature: 7500K-3200K
Filter: 1 SET
LG-1200CSC

LED Bulbs Amount: 1200 PCS
Total Power: 72W
AC Power: 100V-240V
DC Power: 15V
Color Temperature: 7500K-3200K
Filter: 1 SET
www.ledgo.hk
Components:

text_image
Barn doors ① LED Light panel Clamping Screw ② ③ U-Bracket
text_image
3200K Dimming Knob Clamping Screw Power Switch 5600K Dimming Knob Digital display Power Input A. Sony V-lock Battery Plate B. Panasonic or Anton Battery Plate① .Barn Doors: For better adjustment of light direction.
② .Clamping Screws: To fix the light panel with U-bracket.
③ .U-bracket: To fix the light panel and adjust light direction.
4 .3200K Dimming Knob:For dimming 3200K LED bulbs from 0% to 100%. 5600K Dimming Knob:For dimming 5600K LED bulbs from 0% to 100%.
5. Digital display: For displaying lighting brightness, and address code.
⑥ .Power Switch: To switch on or off.
⑦ .Power Input: For input of AC/DC power.
8. Power Adapter: For connecting 100V-240V AC power to DC inverting and power stabilizing.
⑨ .Optional configuration:
• A. Sony V-Lock Battery Plate: For mounting Sony V-Lock Batteries.
• B. Panasonic or Anton Battery Plate: For mounting Panasonic or Anton Batteries.

text_image
Gels Holder 16 Filters- Gels Holder: For packing the diffuser and filters.
- Diffuser and Filters: Without diffuser and filters, light is of spotlight effect and suitable for shooting at a relatively long distance; with diffuser, light is of soft light effect; with extra soft diffuser, light is of extra soft light effect; With blue filter, color temperature could be adjusted towards 7500K (as below pictures).

Without filter and diffuser

With diffuser

With extra soft diffuser

With blue filter