VX44 - Uhr Lorus - Kostenlose Bedienungsanleitung

BEDIENUNGSANLEITUNG VX44 Lorus

NREAD

7-2010

Instruction Manual

LORUS

ANALOGUE QUARTZ

LORUS

■HOW TO USE NON-CALENDAR MODEL

Normal position First click

Pa the crown OUT to the FIRST clock and set the time. Then push the crown N

Note: When you set the time, list set the minute hand to a properly covered time, then return the minute hand to the correct time by turning it COUN LRCLOCKWISE.

Time settling for Cal. V516

Turn the funds counterclockwise to advance them 4 to 5 minutes ahead of the desired time then turn them clockwise to so them to the exact time.

■HOW TO USE DAY/DATE MODEL

The day of the week can be displayed b ingually (English/another language) and you can select other

1. How to set the day and date

Pull out the crown to their click position. (he crown of its welen can be put out to the second click position)

PU out the crown to the second key position and se the present day and date by turning the minute hand

(English or the other languages)

Day selling for Col. V828 (Ladies' Day/Dale)

Turn the hands clockwise and counterclockwise repeatedly between 1\~15 pm and 345 am to select the desired day and language.

Note: So not attempt to see the day and date between the time of 9:30 am and 4:00 am as this may cause the day and date displays to change out of sequence.

1. How to set the time

Pull out the Turn he crown crown to the and set the second click desired time.

Push the crown in to the home position in accordance with a "the sign"

position and the second hard slips. The second hard should be slopped on 12 clock position.

- Be sure to check that the AM/PM is correctly set (the day are date here designed to change once every 24 hours)

• To adjust the correct time for a quartz watch, it is necessary to overcome the minute hand 4 c-5 minutes ahead of the correct time and then turn it counter-clockwise to set the designated line

LUMIBRITE WATCH

* I your watch is a LORUS LUM BRILL watch. It has to low ng features.

LORUS LUMBER TE watches closer and store light energy non natural and artificial light sources and on light in the dark. They are made of environmentally friendly materials, and therefore, are harmless to human beings and the environment.

- With a full charge, LORUS LU VIBRITE watches grow in the six hours longer than conventional luminous watches of this type. It exposed to a light of more than 600 lux (i.e., the brightness of a typical office) for approximately 10 minutes, or direct sunlight for 2 minutes, they will grow for hours

- Since LORUS LUMISKIF watches emit the light they store, the brightness will decrease gradually over time. The length of time they will glow may also differ slightly depending on such factors as the brightness of and distance from the light source used to charge the watch.

BATTERY CHANGE

As the battery is inserted of the factory to check the function and performance of the watch. Is so dull. He once in your possession may be less than the special period.

Be sure to replace the battery to prevent any possible malfunction as soon as it runs down. To replace the battery, we recommend taking the watch to a local watch retainer.

■ CARE OF YOUR LORUS WATCH

BATTERY

CAUTION

Do not expose the old battery to fire or recharge it. Keep it at a place beyond the reach of children. If a child swallows it, consult a doctor immediately.

- WATER RESISTANT

Name or Standard Indicator or Date (see Table)	Not specified with a other a) applies of 12.1	5-mining at listing a water	3-min dark
No Indication	NO	NO	NO
WATER RESISTANT	Yes	NO NO	NO
WATER RESISTANT* (100N/10 BAR) at above	YES	YES NO	NO
WATER RESISTANT* (100N/10 BAR) at above	YES	YES YES NO

* If your watch is 200 M/23 BAR, 100 M/10 BAR or 50 M/s BAR water resistant, it is so indicated on the clo /case book
- Be to press the buttons or turn the crown when the watch is wet.
• I the water is exposed to salt water, since I in fresh water can then wine thoroughly

Caution:

Logather shops are no water resistant except so indicated, even if the watch hecd is water resistant.

- ALLERGIC REACTION

Because the case and band touch the skin directly, it is important to clean their regularity. If not, shirt sleeves may be saline and those with delicate skin may develop a mask. Please wear the watch with some pay to avoid any possible charge a reaction. If you develop a rash on your wrist, stop wearing and consulting physician.

• MAGNETISM

Your watch will be adversely affected by strong magnetism. Keep flow away from close contact with natural causes.

- SHOCKS AND VIBRATIONS

Your watch may be worn for rental spots activities, but be careful nor to drop it or hit it on hard surfaces

• TEMPERATURE

Your watch is broadly used so that constant accuracy may be insured at net real temperature.

SERVICE

When your LCRS watch requires reset or serving, please see the enclosed WARRAN Y/ GUARANLE

■HOW TO ADJUST BAND LENGTH

Sliding clasp band

1. Try up the adjusting fao with a small screwdriver or something with a sharpened tip.

2. Slide the close to adjust it to a desired size.

3. The grooves on the lock side of the correct should fill into the convex portion on the close, then close the adjust flop.

- Wrong method

If you do this way, the adjusting flap may be destroyed.

Eruited a library