EC11 - Hausautomation ELRO - Kostenlose Bedienungsanleitung

BEDIENUNGSANLEITUNG EC11 ELRO

Wireless Energy Meter

The instruments are designed to provide accurate and reliable measurements. Before setting up the meter, please read these instructions carefully.

Main set function:

The main set work on battery, can be put on an indoor desktop, it can display datas as the following:

1. Display current clock.
2. Display temperature and humidity.
3. Display line voltage.
4. Display line current.
5. Display line power.
6. Display and memory each channel accumulative Kwh.
7. Display and memory greenhouse gas emission.
8. Display and memory accumulative total Kwh..
9. Display and memory total on time and total electric charge.
10. Display and memory total on time and total electric charge of price1.
11. Display and memory total on time and total electric charge of price2.
12. Receive max. 3 channel wireless remote transmitter.

Transmitte set function:

The transmitter acquisition voltage, current, power and transmit them to main set, then display on main set. Plug the remote transmitter into power socket, then plug an appliance into the transmitter. The transmitter can transmit up to 30 meters without outside interference (e.g. metal surface, electrical device, ect).

I. Key

MODE key

SET key

PRICE key

CODE key

UP key

CLR key

CLK/ARM key

II. Operating instruction

1. Choice of display mode:

(1) Press MODE key, the data display line voltage, line current, line power, Kwh, greenhouse gas emission.
(2) Press PRICE key, the data display accumulative total Kwh, total on time and total electric charge of price1, total on time and total electric charge of price2.

2. Clock set

Press SET key for over 3 seconds to set week firstly, press UP key to set week; then Press SET key to set hour, press UP key to set hour; then Press SET key to set minute, press UP key to set minute, comeback clock display mode if no key-press operation is performed after 15 seconds or press CLK/ARM key.

3. Clock alarm set

Press CLK/ARM key under clock display mode to enter alarm display mode. Press SET key to set hour first, press UP key to set hour; then Press SET key to set minute, press UP key to set minute. Return to clock display at press of CLK/ALM key, and icon “ ” will display and flicker if alarm is set.

Alarm starts at appointed time: when alarm starts at appointed time, buzzer will give off "BEEP" sound and stops after 60 seconds; press any key to stop alarm within 60 seconds. Press CLR key to cancel alarm during alarm setting.

4. Price set

Press PRICE key once and release, Then press and hold PRICE key for 5 seconds during display state of total Kwh or price.

(1). Setting price 1:

(a). Press SET key once and release, SET display, the first digital COST/kWh flash, press UP button to set it.
(b). Press SET key once again and release, the second digital COST/kWh flash, press UP button to set it.
(c). Press SET key once again and release, the third COST/kWh flash, press UP button to set it.
(d). Press SET key once again and release, the fourth COST/kWh flash, press UP button to set it.
(e). Press SET key once again and release, the radix point COST/kWh flash, press UP button to set it.
(f). Press SET key once again and release, the weekday flash, press UP button to set it.
(g). Press SET key once again and release, the hour of ON TIME flash, press UP button to set it.
(h). Press SET key once again and release, the minute of ON TIME flash, press UP button to set it.

(2). Setting price 2:

Press PRICE key once and release after finish Setting price 1. Setting price 2, repeat above steps.

5. Max load alarm set

Long press MODE key under current (AMP) display mode to enter Max load alarm set. Press SET the Max load will flash, Press UP key to set Max load alarm. The buzzer will give off "BEEP" sound and MAX LOAD will flash the when the load exceeds the setting load. The buzzer will stop and MAX LOAD will stop flash until the load less than the setting load.

6. The scale of to KG GAS/KWH set

Long press MODE key under KG GAS/KWH display mode to enter scale of KG GAS/KWH set. Press SET key the KG GAS/KWH will flash,Press UP key to set Max load alarm.

The scale of KG GAS/KWH, you can inquire department of energy.

7. Channel-select

Channel-select: conduct channel-select for 1,2 or 3 remotes before using them. Channel-select steps:

(1)Load main set battery, long press the CODE key, 1^st channel-select, wireless reception displays1 “- -:- -”. Plug the 1^st remote transmitter into power socket, long press the SET key after the LED of transmitter flash six time automatic, the 1 will display the electrical data if channel-select succeed.
(2) Short press the CODE key again, enter the 2^nd channel-select, long press the CODE key, wireless reception displays2 “-:-:-”. Plug the 2^nd remote transmitter into power socket, long press the SET key after the LED of transmitter flash six time automatic, the 2 will display the electrical data if channel-select succeed.
(3) Short press the CODE key again, enter third channel-select, long press the CODE key, wireless reception displays 3 “- -:-”. Plug the third remote transmitter into power socket, long press the SET key after the LED of transmitter flash six time automatic, the 3 will display the electrical data if channel-select succeed.

Then you can place the main set up to 30m away from the remoet set.

Corresponding data(000) will display as follow when failing to receive the remote data, Most of the time the unit will repeating receive the remote signal till the correct data displays. However, if corresponding data(000) continue to occur, the following may also be the reason:

(a). The main set has been placed outside of the effective transmission range (more than 30 meters). Please move the main set closer to the remote set.
(b). The remote may have outside interference that is preventing proper transmission. Sources of the interference include but are not limited to metal surfaces, electrical devices, ect. The remote may need to be relocated if interference continues.
(c).Low battery. Please change the battery if it used for too long time, repeat the step (1), (2), (3) to reselect channel after change battery.

III. Care of the product

Wipe off any dirt using a soft cloth, dipped in mild detergents, wipe off any dirt using a soft dry cloth. Avoid placing the uints in prolonged direct sun, wind chill, rain or high humidity-position. Secure the uints to avoid dorpping-excessive force which will permanently damage the uints. Do not tamper with the internal components. Always read the instructions in full before operating the uints. Failure to follow these care guidelines will invalidate the warranty on the uints.

IV. Technical features

1	Indoor Testing temperature scope -10	°C ~ +40°C
2	Testing temperature precision +/-1	°C
3	Testing humidity scope	30%RH ~ 95%RH
4	Testing humidity precision	+/-5% in the range of 40%~80%+/-8% in the range of 30%~40% or 80%~95%
5	Clock precision +/-1minute/month
6	Wireless transmission and reception frequency RF433.92MHz
7	Effective distance of wireless transmission and reception	Maximum 30M in open space
8	Main set power supply	4.5V(3 pieces AA/UM3/LR6 size 1.5V battery)
9	Battery life	about 3 months without AC power
10	Remote power supply	230V/50Hz
11	Measure voltage range	190-276V AC
12	Measure voltage accuracy	+/-1%
13	Measure current range	0.02-16A
14	Measure current accuracy +/-1% or +/-0.01A
15	Measure power range	0.5-4416W
16	Measure power accuracy	+/-1% or +/-0.5W
17	Accumulative electric quantity range	0 -9999.9Kwh
18	Greenhouse gas emission range	0 -9999.9KG

EMG-2T, EMF-2T, EMD-2T, EMI-2T, EMIS-2T/EM-2R