HL55 - Taschenlampe Fenix - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts HL55 Fenix als PDF.
Benutzerfragen zu HL55 Fenix
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Taschenlampe kostenlos im PDF-Format! Finden Sie Ihr Handbuch HL55 - Fenix und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. HL55 von der Marke Fenix.
BEDIENUNGSANLEITUNG HL55 Fenix

text_image
FENIX™ Eliminate Your Adventures HL55 Max 900 Lumens User ManualFonix HL55 Headlamp
The Ferox HLSS headlamp offers four brightness levels plus 900-lumen burst mode and 150-hour runtime from one 18650 battery or two CR123A batteries. Neutral white light means superior definition and penetration in high-lumidity environments. A 116-meter carry distance reaches farther while the side switch on the head is all you need for ON/OFF output selection and burst. With all-metal housing and ANSI reset, the HLSS matches all-season backcountry and cave exploration:
= Utilizes Crue XM-L2 TB neutral white LED with a lifespan of 50,000 hours
- Uses one 100% or two CR123A batteries
- 94mm (Length) = 48mm (Width) = 48mm (Height)
- 115 -gram weight (excluding batteries)
- Digitally regulated output maintains constant brightness.
- Reverse polarity protection guards against improper battery
特此公告。
- All-function switch in the head for easy and fast operation
- High output Burst mode
- Make from durable aluminum alloy
Premium Type III hard-anodized anti-abgressive finish
- Toughened ultra-clear glass lens with anti-reflective coating
Technical Parameters
| ANSINEMA FL.1 | General Mode | Burst | |||
| High | Mid | Low | Eco | ||
| OUTPUT | 420 Lenses | 96 Lenses | 33 Lenses | 13 Lenses | 600 Lenses? |
| RUNTIME | 3h 45min | 10h | 20h | 90h | 1 |
| DISTANCE | 71Min (Max) | ||||
| INTENSITY | 85Min (Max) | ||||
| IMPACTRESISTANT | 1Min | ||||
| WATERPROOF | 6PA, Superimaker 2m | ||||
| ACCESSORIES | Headboard & Headboard Up (Headboard Mount and Wing) | ||||
Note: The company's performance is marked by FMR Rating from 418 to 25.2.16 (14.02) exchange rate changes are shown in two different markets and rates of different levels, including at a nonperform
Operation
DivDil Operation
Press the side switch button on the head to activate the HI 95.
Press and hold the button on the head for 0.5 seconds to turn off
the light
Brightness selection
with the hospital on, prize the budget on the head to change
Burst Mode
Press and hold the button for over one second to activate the burst mode. After 30 seconds, the HL55 returns to the previous condition.
Intelligent Memory Circuit
The headlamp recognizes the last used brightness level. The next time you turn on the headlamp, it will light up at the last used brightness level.
(No text)
| Low | Eco |
| Lutetrie | 13 Lutetrie |
| 20x | 150x |
| 110x (Max) | |
| 8000 (Lumex)2 | |
| 10x | |
| PA Lundreeder 2m | |
| Bast(14) Waldenfeld Resort and O-ring | |
The following table provides the results of the Company's performance: 2016, 2017, and 2018.
Battery Specifications
| Type | Dimensions | Nominal Voltage | Unlubbing | |
| Farms 400 L2 | 16000 | 3.7A | Maximum | √ |
| Farms 400 L2L | 16000 | 3.7A | Maximum | √ |
| Farms 400 L2M | 16000 | 3.7A | Maximum | √ |
| Non-Indesible Balley (500V) | 241154 | 2A | Minimum | √ |
| Non-Indesible Balley (500V) | 24100 | 5.7A | Minimum | × |
| Non-Indesible Balley (500V) | 24000 | 5.7A | Maximum ^3 | | |
| Non-Indesible Balley (500V) | 24000 | 5.7A | Minimum | √ |
| Non-Indesible Balley (500V) | 24000 | 5.7A | Minimum | × |
* 1. BANCO-300 batteries are powerful safe designed for commercial applications and must be levied with solution and handled with coke, consuming together with coal protection self-reduce the potential that combination or expansion that can damage to short processing and potential into the user assumes this recommendation using Henry ABB LLC2012M Link20 battery.
Battery Replacement
Unscrew the nut (opposite to the side switch) and insert the battery follow the polar indicators. Replace the side cap and sensibly fasten the nut.
Assemble the Headlamp

Slide the buckle to adjust the length of the headband to fit


Attach the top headband report to the headband and then attach the top headband to the headband holder and the top headband report for additional stability
Usage & Maintenance
Please don't disassemble the sealed head, as doing so can cause damage to the light and will void the warranty
The Owing may be worn out after using for a long time. If it happens, please replace the Owing with a new now to keep the light properly sealed against water.
Please clean the contacts of your light from time to time, especially if the light fickers or doesn't light up. There may be several reasons for a flickering or imperative light.
Reason A. The battery needs replacing
Solution: Replace the battery with positive (+) and negative (-) terminals property aligned.
Poisson B: The threats. PCR heard contact or other products
Solution: Clean the contact points with an alcohol intake solution ewash.
If the above methods don't work, please contact the distributor and refer to the warranty policy.
Product Warranty
We will replace products with manufacturing defects within 15 days of purchase and repair a light free of charge within 24 months of purchase if problems develop with normal use. If repair is required after 24 months from the date of purchase, we will charge for parts. The total repair fee is dictated by the cost of the repaced materials.
Product Registration
We kindly suggest that you register your product on the official website of Fenixlight Limited (www.fenixlight.com). You can get an extra six-month warranty period since you have successfully registered. By participating in an optional customer survey, you are entered in a drawing for free Fenix products.
Warning
HLNS is a high-intensity lighting device capable of causing eye damage. Avoid sharing the light directly into the eyes.
The light will accumulate heat after working in the burst mode for an extended period of time. In order to avoid injury, do not touch the metal part of the light head.