Hercules HS5768CX - Freisprecheinrichtung fürs Auto Hifonics - Kostenlose Bedienungsanleitung

Produkttyp	Freisprecheinrichtung fürs Auto
Modell	Hercules HS5768CX
Marke	Hifonics
Abmessungen (ca.)	100 x 50 x 20 mm
Gewicht (ca.)	200 g
Stromversorgung	12 V DC (Fahrzeugbordnetz)
Bluetooth-Reichweite	bis zu 10 m
Freisprechfunktion	Ja, mit Rauschunterdrückung
Lautstärkeregelung	Am Gerät und über das Fahrzeugradio
Anschlüsse	3,5-mm-Klinke, USB (nur Strom)
Lieferumfang	Hauptgerät, Halterung, Montagematerial, Bedienungsanleitung
Einbauort	Armaturenbrett oder Sonnenblende
Sicherheitshinweise	Nicht während der Fahrt bedienen; Installation von Fachpersonal empfohlen
Reinigung	Mit weichem, trockenem Tuch
Kompatibilität	Die meisten Smartphones mit Bluetooth (HFP)
Garantie	1 Jahr

Häufig gestellte Fragen - Hercules HS5768CX Hifonics

Wie schließe ich die Freisprecheinrichtung an?

Verbinden Sie das Gerät mit dem 12-V-Anschluss des Fahrzeugs und koppeln Sie es über Bluetooth mit Ihrem Smartphone.

Kann ich die Freisprecheinrichtung selbst installieren?

Ja, aber wir empfehlen, die Installation von einem Fachmann durchführen zu lassen, um Schäden zu vermeiden.

Wie stelle ich die Lautstärke ein?

Die Lautstärke kann direkt am Gerät oder über das Fahrzeugradio eingestellt werden.

Warum kann ich keine Verbindung herstellen?

Stellen Sie sicher, dass Bluetooth auf Ihrem Smartphone aktiviert ist und das Gerät im Pairing-Modus ist. Entfernen Sie andere Geräte in der Nähe.

Wie reinige ich das Gerät?

Verwenden Sie ein weiches, trockenes Tuch. Vermeiden Sie aggressive Reinigungsmittel.

Kann ich Musik über die Freisprecheinrichtung hören?

Ja, Sie können Musik über Bluetooth streamen oder über den AUX-Eingang abspielen.

Wie schalte ich das Gerät aus?

Das Gerät schaltet sich automatisch aus, wenn der Motor abgestellt wird. Sie können es auch manuell ausschalten.

Was kann ich tun, wenn die Tonqualität schlecht ist?

Überprüfen Sie die Position des Mikrofons und vermeiden Sie Störungen durch andere elektronische Geräte. Passen Sie die Lautstärke an.

Ist das Gerät mit allen Smartphones kompatibel?

Es ist mit den meisten Smartphones kompatibel, die das HFP-Profil (Hands-Free Profile) unterstützen.

Wo finde ich die Bedienungsanleitung?

Die Bedienungsanleitung liegt dem Gerät bei oder kann auf der Website von Hifonics als PDF heruntergeladen werden.

BEDIENUNGSANLEITUNG Hercules HS5768CX Hifonics

Congratulations on your choice of a Hifonics speaker. This "Quick Start Installation" guide is meant to help you "hook up" and play music. For more detailed information on system setting, speaker and subwoofer configuration, and full specifications by model, visit the website at Hifonics.com

CAUTION

Always consider consulting a professional audio installer before installing new speakers. Many car manufacturers locate speakers behind interior panels that require special tools to remove those panels to access the speakers. Some panels will be screwed in, some will use plastic fasteners, many will have both. Be careful and take your time. If you are using the speaker wire supplied with your new speakers make sure that you run the speaker wires through the factory boot. Do not let speaker wire make contact with metal edges of doors or other access holes.

Speaker Dimensions

	A B C	D E F
HS35CX	X.1.7'(4)	2.3'(59)2.6''	(66)3.1''(79)3.4''	(87)
HS46CX	X.2.0'(5)	2.3''(58)3.1''	(76)3.5''/5.7''		(90/144)	3.9''/6.0'' (98/153)
HS5768CX	X.2.5'(6)	3.0''(77)3.6''	(92)4.8''/7.2''		(121/183)	5.5''/7.6'' (140/192)
HS6.2C	6.9'(176)2.5''	(63)2.8''(71)	3.6''(92)5.7''(14)	(6.8''(167)
HS65CX	6.9'(176)2.5''	(63)3.0''(75)	3.6''(92)5.7''(14)	(6.8''(167)
HS693	7.1''/10.2'' (179/260)	3.4''(87)4.0''	(101)4.6''(116)	(5.9''/8.7''	(150/220)	6.5''/9.1'' (165/230)

Before you start

It's a good idea to confirm that you have purchased the correct size speakers to fit your vehicle. If you have any reservations about being able to complete the installation yourself, we recommend contacting a professional. The removal of interior panels can be tricky and may require special tools. Be careful as you go.

Factory Speaker Removal

A Access and remove factory door speakers Most modern vehicles have speakers that are mounted directly to the structure of the door. Access is achieved by the removal of the door panel. Some vehicles may only require the removal of a small panel around the speaker itself.

B Access and removal of rear factory speakers

Most rear speakers are accessed from within the trunk. Some may require the removal of the rear package tray. Hatchbacks and SUV's will usually require the removal of a side panel.

Line drawing of a car rear view showing the front compartment and side compartments (no text or symbols)

C Fit and Wiring

Once the factory speakers are removed, check the fit and determine if there is enough depth clearance for the new speaker. A good way to do this is to roll the window down and back up while holding the speaker in place. If you decide to run wires, make sure to use factory harness boots and grommets where ever possible.

Line drawing of a car door and side panel showing internal compartments (no text or symbols)

Coax installation

A Factory location behind door panel

Once you are sure the speaker fits and has adequate clearance, connect the positive and negative wires to the proper terminals. Securely screw the speaker into place. Replace door panel.

Diagram showing a car interior with steering wheel and dashboard (no text or symbols)

B Factory location behind small panel

Once you are sure the speaker fits and has adequate clearance, connect the positive and negative wires to the proper terminals. Securely screw the speaker into place. Replace speaker cover panel.

Custom location

Some vehicles may not have a door speaker location. While it is possible to install the speakers in this situation, it is more difficult. Consider using a professional for custom installations.

D Rear factory locations

Mount the speakers in same way that the factory speaker was mounted. Attach the positive and negative wires to the proper terminals. Make sure any wires are secured properly.

Line drawing of a car interior showing a handle, seat, and dashboard (no text or symbols)

Component installation

Factory location

behind door panel

Vehicles that have premium sound systems will often have separate tweeters in a dash or door location. Try to use this location for mounting the component tweeter if possible.

Custom location

If there is not a suitable factory location for woofer or tweeter to be mounted, custom mounting may be necessary. Before making any permanent changes to your vehicle make sure there is adequate mounting depth.

Tweeter mounting

There are three primary ways the tweeter can be mounted. Surface, Flush and Custom mounting. The flush mount configuration is shown here.

Crossover wiring

The crossover is necessary for the proper operation of the component speaker system. Make sure the wires are securely attached and that there are no stray strands of wire contacting other terminals. Mount the crossover to a secure surface that is free of interference from window mechanisms and excessive moisture.

Hifonics.com

POWERFROMTHEGODS

WARRANTY

Maxxosnics USA Inc. warrants this product, to the original consumer purchaser, to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Maxxosnics USA Inc. will, at it's discretion, repair or replace defective products during the warranty period. Components that prove to be defective in materials and workmanship under proper installation and use must be returned to the original authorized Maxxosnics USA Inc. retailer from where it was purchased. A photocopy of the original receipt must accompany the product being returned. The sale price is subject to increase in the value of the acquisition of Maxxosnics USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website.

Hifonics products are designed and engineered in the USA by

MAXXSONICS

847-540-7700

www.maxxsonics.com

HF HS QSG 01 - rev1

HERCULES

Quick Start

Installation Guide

Technical line drawing of a mechanical component with circular and rectangular features (no text or symbols)

HS35CX

HS6.2C

HS46CX

HS65CX

HS5768CX

HS693