SR31T1D - Barcode-Scanner Intermec - Kostenlose Bedienungsanleitung

Produkttyp	Barcode-Scanner
Marke	Intermec
Modell	SR31T1D
Abmessungen (B x H x T)	170 x 100 x 70 mm
Gewicht	200 g
Schnittstelle	USB, Bluetooth (optional)
Stromversorgung	Lithium-Ionen-Akku, 3,7 V, 2200 mAh
Scan-Technologie	Laser / 2D-Imager
Lesbare Codes	1D: EAN, UPC, Code 39, Code 128; 2D: QR, Data Matrix
Scan-Geschwindigkeit	200 Scans pro Sekunde
Lesereichweite	5 – 30 cm (abhängig von Strichcode-Dichte)
Betriebstemperatur	-10 °C bis +50 °C
Luftfeuchtigkeit	5 % – 95 % (nicht kondensierend)
Schutzart	IP42
Sturzfestigkeit	1,5 m auf Beton
Anzeige	LED-Statusanzeige
Reinigung	Mit weichem, trockenem Tuch; keine aggressiven Reiniger
Sicherheit	Laserklasse 1, CE-Kennzeichnung
Ersatzteile	Akku, Ladekabel, Gehäuseoberteil verfügbar
Garantie	2 Jahre
Lieferumfang	Scanner, USB-Kabel, Kurzanleitung

Häufig gestellte Fragen - SR31T1D Intermec

Wie verbinde ich den Intermec SR31T1D mit dem Computer?

Wie lade ich den Akku des SR31T1D?

Wie reinige ich den Scanner?

Welche Barcodes kann der SR31T1D lesen?

Der Scanner piept, scannt aber nicht. Was tun?

Wie lange hält der Akku?

Kann ich den Scanner drahtlos verwenden?

Was bedeuten die LED-Signale?

Wo finde ich die Bedienungsanleitung?

Welche Ersatzteile sind erhältlich?

BEDIENUNGSANLEITUNG SR31T1D Intermec

Product profile

SR31T

Durable 1D/2D

Handheld Scanner

Black and white barcode scanner with blue handle and black cable (no visible text or symbols)

SCANNING

Available with the industry's fastest 2D imaging technology for highly responsive, dependable scanning

RUGGED

Tested to withstand two meter drops to concrete and rated IP53

PLUG & PLAY

Simply connect the scanner to the host and start scanning Immediately; no time-consuming configuration necessary

ADAPTABLE

Can be customized to your environment, with adjustable LED color, beeper tone and vibration setting

ERGONOMIC

Time-tested design is comfortable to hold for extended periods

Gain a Performance Advantage

The SR31T was designed to maximize user productivity. Area imager versions integrate Intermec's EA30 or EA31 imaging engines for a level of scanning speed and responsiveness historically found in only the fastest laser scanners. Extreme motion tolerance (up to 500 in/sec) and omni-directional reading result in effortless, consistent scanning—at any orientation.

With an uncanny ability to read poor-quality codes, the SR31T can help you avoid error-prone manual data input routines. Read codes that are damaged, partially obscured, off-angle, colored, high resolution, or low contrast. And thanks to VESTA, Intermec's patented scanning algorithm, EAN/UPC and Code 39 read range is increased by an average of 60 percent.*

Ready for Tomorrow

The SR31T high performance imager was developed to address your scanning needs now and well into the future. Not only can it read all common 1D, PDF, 2D, and postal symbologies—it can also reliably read these codes from smartphone, tablet, and computer displays.

Reliability for the Long Term

Performance isn't just about speed; it's also about longevity in demanding environments. The SR31T sets a new ruggedness standard, with an IP53 rating

*Compared to previous-generation SR30 scanners.

for protection against dust and water ingress, and an impressive two meter (six foot) drop specification to concrete.

Easy to Install, Easy to Use

Integrating the SR31T into your environment is truly plug-and-play. Simply connect the scanner to the host and start scanning. If new application requirements arise, just change out the interface cable with the simple push of a button—no need to replace the entire scanner. This flexibility reduces device costs and complexity, both for you and your IT staff.

The SR31T also includes distinctive design elements that add to its versatility. Unique touches, like the over-sized LED light pipe on the scanner head, provide bright 360-degree feedback in any lighting condition—and its color can be personalized to match the décor of your environment.

Scanner Configuration Made Easy

The SR31 can be quickly and easily customized with Intermec's exclusive EasySet™ PC programming tool. In just a few clicks, this Windows-based utility can print configuration bar codes; adjust security settings; activate or disable symbologies; and alter beeper, vibrate or LED settings. Even sophisticated data editing routines can be set. When you're satisfied with the settings, simply create a configuration bar code to quickly program additional scanners to match.

Intermec®

Physical Characteristics

Dimensions (LxWxH):

10.7 cm (4.2 in) x 6.8 cm (2.7 in) x 16.8 cm (6.6 in)

Weight: 195 gm (6.9 oz)

Typical Power Consumption

SR31T2D/HP: 330mA @ 5V DC

SR31T1D: 120mA @ 5V DC

Connectivity

• USB: Virtual Com, HID profiles
• POS Interfaces: HID POS, IBM SurePOS
• PC Keyboard Wedge
• RS232
- Wand Emulation
- OS Compatibility: iOS, Android ^ , Windows XP/Vista/7/8

Scan Technology

SR31THP: Intermec Area Imager with Laser Aimer (EA30)

SR31T2D: Intermec Area Imager with LED Aimer (EA31)

SR31T1D: Intermec Linear Imager (EV14+)

Bar Code Symbologies for 1D Model (SR31T1D)

Codabar, Code 11, Code 39, Code 93/93i, Code 128 (GS1-128), EAN/UPC, GS1 DataBar Limited, GS1 Composite (linear only), GS1 DataBar Expanded, GS1 DataBar Omnidirectional, Interleaved 2 of 5, Matrix 2 of 5, MSI, Plessey, Standard 2 of 5, Telepen

Bar Code Symbologies for 2D Models (SR31THP/2D)

All above symbologies supported by 1D model plus the following: DataMatrix, QR Code, Micro QR, PDF417, Micro PDF417, Aztec, Maxicode, Han Xin, Codablock A, Codablock F, GS1 Composite, TLC 39, and Postal Codes (Australian Post, BPO, Canada Post, Dutch Post, Infomall, Intelligent Mall, Japan Post, Planet, Postnet, Sweden Post)

Scan Performance

Min. Code Resolution:

1D Codes: 4 mils

2D Codes: 6.6 mils

Min. Print Contrast:

SR31T1D: 25%

SR31T2D/HP: 20%

Max. Scan Rate:

SR31T1D: 200 scans/s

Motion Tolerance:

SR31THP: 500 in/s

SR31T2D: 400 in/s

User Feedback

• Oversized, Multi-Color, Color-Customizable LED
• Configurable Buzzer
• Configurable Vibrator

North America

Corporate Headquarters

6001 36th Avenue West

Everett, Washington 98203

Phone: [phone]

Fax: [phone]

North Latin America

Headquarters Office

Mexico

Phone: [phone]

Toll Free NOLA:

01800 490 4990

South Latin America

Headquarters Office

Brazil

Phone: [phone]

Fax: [phone]

Europe, Middle East

& Africa

Headquarters Office

Reading, United Kingdom

Phone: [phone]

Fax: [phone]

Asia Pacific

Headquarters Office

Singapore

Phone: [phone]

Fax: [phone]

Environment

Operating Temperature: 0°C to +50°C (32°F to +122°F)

Storage Temperature: -20°C to +70°C (-4°F to +158°F)

Relative Humidity: 5 to 95% non-condensing

Drop: 26 drops from 1.83 m (6 ft.) to concrete

Environmental Rating: IP53

Ambient Light: 0 to 100,000 lux

Electromagnetic Emissions Standards

Meets the requirements of the following product

emission standards:

• FCC Part 15 Class B (United States)
• Industry Canada ICES-003 Class B (Canada)
• EN 55022: CISPR 22 Class B (European Union)

Environmental Compliance Requirements

Conforms to environmental compliance requirements

for RoHS, China RoHS, WEEE, and REACH.

Regulatory Approvals

UL; CE Mark (EU); C-TICK (Australia and New Zealand)

Standard Warranty

Five year standard warranty, with extended protection available via Intermec Medallion Support Services.

Accessories

View the SR31T Accessory Guide for complete details.

• Adjustable Stand
• Gooseneck Stand
• Cables (USB, Powered USB, RS232, Keyboard Wedge Interface, Wand Emulation)
• EasySet™ Configuration Software

Typical Reading Distances\*

SR31T1D

Symbology Density		Minimum Distance	Maximum Distance
Code 39 0.1 mm	(4 mils)	4.5 cm(1.77 in)	21.5 cm(8.46 in)
	0.125 mm(5 mils)	3.5 cm(1.38 in)	24 cm(9.45 in)
	0.25 mm(10 mils)	3.5 cm(1.38 in)	31 cm(12.20 in)
	1 mm(40 mils)	8.5 cm(3.35 in)	86 cm(33.86 in)
EAN/UPC 0.33 mm(13 mils)		3.2 cm(1.26 in)	31.5 cm(12.40 in)

Media Sales

EMEA: ([phone]

USA: [phone]
http://intermec.custhelp.com

[Non-Text]

Sales

Toll Free NA: [phone]
Toll in NA: [phone]
Freephone ROW:
00800 4488 8844

OEM Sales

Phone: [phone]

Customer Service

and Support

Toll Free NA: [phone]
Toll in NA: [phone]
EMEA: intermec.custhelp.com

Internet

www.intermec.com

Worldwide Locations

www.intermec.com/locations

SR31T2D

Symbology Density		Minimum Distance	Maximum Distance
Code 39 0.1 mm	(4 mils)	3 cm(1.18 in)	18 cm(7.09 in)
	0.125 mm(5 mils)	3 cm(1.18 in)	23 cm(9.06 in)
	0.5 mm(20 mils)	5 cm(1.97 in)	66 cm(25.98 in)
	1 mm(40 mils)	13 cm(5.12 in)	116 cm(45.67 in)
EAN/UPC 0.33	mm(13 mils)	4 cm(1.57 in)	40 cm(15.75 in)
PDF417 0.25 m	(10 mils)	3 cm(1.18 in)	24 cm(9.45 in)
	0.38(15 mils)	3 cm(1.18 in)	35 cm(13.78 in)
DataMatrix 0.25	(10 mils)	4 cm(1.57 in)	18 cm(7.09 in)

SR31THP

Symbology Density		Minimum Distance	Maximum Distance
Code 39 0.1 mm	(4 mils)	4 cm(1.57 in)	21 cm(8.27 in)
	0.125 mm(5 mils)	3 cm(1.18 in)	26 cm(10.24 in)
	0.5 mm(20 mils)	5 cm(1.97 in)	70 cm(27.56 in)
	1 mm(40 mils)	13 cm(5.12 in)	124 cm(48.82 in)
EAN/UPC 0.33 mm(13 mils)		4 cm(1.57 in)	46 cm(10.11 in)
PDF417 0.25 mm(10 mils)		3 cm(1.18 in)	26 cm(10.24 in)
		0.38 (15mils)	3 cm(1.18 in)
DataMatrix 0.25 mm(10 mils)		5 cm(1.97 in)	21 cm(8.27 in)

* The reading distances for each scanner are typical distances measured from the front end of the scanner bezel in an office environment (200 lux) with extended reading range activated (if applicable).

Note: This warning applies only to SR31THP (EA30) models.

Copyright © 2013 Intermec Technologies Corporation. All rights reserved. Intermec is a registered trademark of Intermec Technologies Corporation. All other trademarks are the property of their respective owners. 612284-A 07/13

In a continuing effort to improve our products, Intermec Technologies Corporation reserves the right to change specifications and features without prior notice.