Lithium 9V - Batterie HQ - Kostenlose Bedienungsanleitung
Finden Sie kostenlos die Bedienungsanleitung des Geräts Lithium 9V HQ als PDF.
| Produkttyp | Lithium-Batterie |
| Marke | HQ |
| Modell | Lithium 9V |
| Spannung | 9 V |
| Kapazität | 1200 mAh |
| Chemie | Lithium-Mangandioxid (LiMnO2) |
| Abmessungen (H x B x T) | 48,5 x 26,5 x 17,5 mm |
| Gewicht | 45 g |
| Betriebstemperaturbereich | -20 °C bis +60 °C |
| Lagerungstemperatur | -20 °C bis +30 °C |
| Haltbarkeit (Lagerung) | 10 Jahre |
| Selbstentladung | ca. 1 % pro Jahr |
| Sicherheitshinweise | Nicht wiederaufladbar, nicht kurzschließen, nicht öffnen, nicht über 100°C erhitzen |
| Anwendungen | Rauchmelder, Funkmikrofone, Messgeräte, Sicherheitssysteme |
| Entsorgung | Über Sammelstellen für Batterien, gemäß lokalen Vorschriften |
| Reparatur/Ersatzteile | Nicht reparabel, nur Austausch durch gleichwertige Batterie |
| Zertifizierungen | CE, RoHS |
| Kompatibilität | Standard 9V-Blockbatterie (6LR61, 6F22 etc.) |
Häufig gestellte Fragen - Lithium 9V HQ
Benutzerfragen zu Lithium 9V HQ
0 Frage zu diesem Gerät. Beantworten Sie die, die Sie kennen, oder stellen Sie Ihre eigene.
Eine neue Frage zu diesem Gerät stellen
Laden Sie die Anleitung für Ihr Batterie kostenlos im PDF-Format! Finden Sie Ihr Handbuch Lithium 9V - HQ und nehmen Sie Ihr elektronisches Gerät wieder in die Hand. Auf dieser Seite sind alle Dokumente veröffentlicht, die für die Verwendung Ihres Geräts notwendig sind. Lithium 9V von der Marke HQ.
BEDIENUNGSANLEITUNG Lithium 9V HQ
Lithium Thionyl Chloride Battery Datasheet
1. Model : HQ-LITH-9V-01
2. Specification
1) Nominal voltage: 10.8V
2) Nominal capacity: 1200mAh(1mA / 6.0V)
3) Discharge end-voltage: 6.0V
4) Max constant discharge current: 50mA
5) Max. pulse current: 100mA
6) Ambient temperature range: -55^ +85^
7) Storage life: >10 year, Yearly self-discharge < 1%
3. Dimension/Weight
1) Max dimension: 26.3×17×48.5mm
2) Max weight: 31g
4. Performance Testing
Unless other requests, all tests are carried out in ambient temperature 25 ± 2^ .
Tests should be made within 15 days after receipt of the batteries.
5. Warning
Fire, explosion and severe burn hazard. Do not recharge, crush, disassemble heat above 100
| Item Measuring Procedure Standard | ||
| 1.Appearance | Visual check | Clean, unscratched and clearly labeled |
| 2.Dimenaions | Measured by calipers with precision of 0.02mm | Max: 26.3×17×48.5mm |
| 3.Weight | Weighed by balance with precision of 0.1g | 31g (max) |
| 4.Open-circuit voltage | Measure by volt-meter with precision of 0.01V | ≥10.95V |
| 5.Operating voltage | Measure by volt-meter with precision of 0.01V, connecting an impedance of 1100Ωin series, Reaching the target voltage in 5 seconds. | ≥9.60V |
| 6.Nominal discharge | 1mA ,20±2□, Constant discharge to 6.0V. | ≥1200mAh |
| 7.Rapid discharge | 1100Ω,20±2□, Constant discharge to 2.0V.. | ≥700mAh |
| 8.Discharge at high temperature | Put battery in constant ambient temperature of 55±2□ for 16 hours, discharge at3.3K Ω to 6.0V/cell.. | ≥950mAh |
| 9.Discharge at low temperature | Put battery in constant ambient temperature of -40±2□ for 16 hours, discharge at 3.3K Ω to 6.0V/cell | ≥450mAh |
| 10.Charge | Prohibited | Prohibited |
| 11.Over-discharge | Prohibited | Prohibited |
| 12.Self discharge | Store the batteries at constant temperature of 20±5°C, Measure the nominal capacity yearly for 10 years. | ≤1% |
^ C, Incinerate, or expose contents to water. Do not solder directly to the cell
SPECIFICATION
Li-SOCI _2
Model:HQ-LITH-9V-01 9V
Thionyl Chloride Lithium Battery
Characteristics:
Nominal capacity
( 1mA to 6.0V)……1.2Ah
▲ Nominal voltage 10.8V
Max. Continuous current 50mA
Max. Pulse current 100mA
Weight 31g
Dimesion 26.3×17×48.5mm
Operating temperature range -55°C\~+85°C
• Special design is acceptable
◆ Data above is for reference

text_image
48.5 45.4 26.3 13.0 17 Unit:mm(Max.)Characteristic curves

line
| Hours | Voltage (V) | |-------|-------------| | 990 Ω | 10.5 | | 10.5K Ω | 10.5 | | 54K Ω | 10.5 |
line
| Current (mA) | 0°C | -30°C | 55°C | 72°C | 25°C | | ------------ | ----- | ----- | ----- | ----- | ----- | | 0.01 | 0.8 | 0.9 | 1.0 | 1.0 | 1.1 | | 0.1 | 0.9 | 1.0 | 1.1 | 1.1 | 1.2 | | 1 | 1.0 | 1.0 | 1.1 | 1.1 | 1.2 | | 10 | 0.6 | 0.4 | 0.9 | 0.8 | 1.0 | | 100 | 0.3 | 0.2 | 0.7 | 0.5 | 0.8 |
line
| Temperature (°C) | 10mA | 2.1mA | 0.5mA | 3mA | | ---------------- | ------ | ------ | ------ | ------ | | -60 | 10.7 | 10.2 | 9.6 | 9.0 | | -40 | 10.8 | 10.3 | 9.7 | 9.1 | | -20 | 10.85 | 10.4 | 9.8 | 9.3 | | 0 | 10.9 | 10.5 | 9.9 | 9.5 | | 20 | 10.95 | 10.6 | 10.0 | 9.7 | | 40 | 10.98 | 10.7 | 10.1 | 9.9 | | 60 | 10.99 | 10.8 | 10.2 | 10.0 | | 80 | 11.0 | 10.85 | 10.3 | 10.1 |Warning
Fire, explosion and severe burn hazard. Do not recharge, crush, disassemble heat above 100°C, Incinerate, or expose contents to water. Do not solder directly to the cell