K39524US - Laserpointer KENSINGTON - Kostenlose Bedienungsanleitung

Produkttyp	Laserpointer
Marke	Kensington
Modell	K39524US
Lasertyp	Rot (650 nm)
Ausgangsleistung	< 1 mW (Klasse 2)
Reichweite	bis zu 200 m
Gehäusematerial	Kunststoff mit Metallakzenten
Abmessungen (L x D)	ca. 10 cm x 1 cm
Gewicht	ca. 30 g
Stromversorgung	2 AAA-Batterien (nicht im Lieferumfang)
Funktionen	Ein/Aus-Schalter
Sicherheitshinweise	Nicht in die Augen strahlen; Klasse 2 Laser
Reinigung	Mit einem weichen, trockenen Tuch reinigen
Reparatur	Keine reparierbaren Teile, bei Defekt Gerät entsorgen
Garantie	2 Jahre (Herstellergarantie)
Zubehör	Keine weiteren Teile enthalten

Häufig gestellte Fragen - K39524US KENSINGTON

Wie wechsle ich die Batterien?

Entfernen Sie die Batterieabdeckung an der Unterseite. Legen Sie zwei AAA-Batterien mit korrekter Polarität ein und schließen Sie die Abdeckung.

Ist der Laser gefährlich?

Der Laser entspricht der Sicherheitsklasse 2 und ist bei bestimmungsgemäßem Gebrauch sicher. Vermeiden Sie jedoch direkten Blickkontakt mit dem Strahl.

Kann ich den Pointer für Präsentationen verwenden?

Ja, der K39524US ist ideal für Präsentationen und Vorträge. Er hat eine Reichweite von bis zu 200 m und ist auch bei Tageslicht gut sichtbar.

Wie reinige ich das Gerät?

Verwenden Sie ein weiches, trockenes Tuch, um das Gehäuse zu reinigen. Verwenden Sie keine aggressiven Reinigungsmittel.

Funktioniert der Laser auch bei Tageslicht?

Ja, allerdings ist der rote Laser bei starkem Tageslicht weniger sichtbar. Für bessere Sichtbarkeit in hellen Umgebungen empfehlen wir einen grünen Laserpointer.

Welche Batterien benötige ich?

Der Pointer benötigt zwei AAA-Batterien. Diese sind nicht im Lieferumfang enthalten.

Was tun, wenn der Laser schwächer wird?

Ersetzen Sie die Batterien durch neue. Schwächer werdender Laser ist meist ein Zeichen für leere Batterien.

Ist der Laserpointer wasserdicht?

Nein, der K39524US ist nicht wasserdicht. Schützen Sie ihn vor Feuchtigkeit und Nässe.

Kann ich den Pointer reparieren, wenn er defekt ist?

Der Pointer enthält keine reparierbaren Teile. Bei einem Defekt muss das Gerät gemäß den örtlichen Elektroschrott-Vorschriften entsorgt werden.

Wie entsorge ich den Laserpointer?

Entsorgen Sie das Gerät am Ende seiner Lebensdauer nicht im Hausmüll, sondern geben Sie es an einer Sammelstelle für Elektroschrott ab.

BEDIENUNGSANLEITUNG K39524US KENSINGTON

Hardware Reset

If the device stops functioning properly or has become unresponsive, perform a hardware reset by pressing the reset button gently using a small paperclip. The front LED blinks once during reset.

CLASS 2 LASER SAFETY STATEMENT

This laser device complies with International Standard IEC/EN 60825-1: ED 2. 2007, Class 2 Laser Product and also complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to laser Notice No. 50, dated June 24, 2007:

1. Emission of a parallel beam of visible light;
2. Maximum Power of 1 milliwatt CW, wavelength range 650±20 nanometers;
3. Operating temp between 0 °C (32°F) to 40°C (104°F).
   • Do not disassemble the device
4. Do not use the device outside of its specified operating temperature range. If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device.

901-2624-00

KL

Need More?

For additional instructions and disclosures, see the full Instruction

Guide online at:

www.kensington.com/man/K39524

Technical Support

Technical support is available to all registered users of Kensington products.

Web Support

You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website:

www.support.kensington.com.

Telephone Support

There is no charge for technical support except long-distance charges where applicable. Please visit www.kensington.com for telephone support hours.

U.S. 800-535-4242 or 650-572-2700

Canada 800-268-3447

Please note the following when calling support:

• Call from a phone where you have access to your device.
• Be prepared to provide the following information:
  – Name, address, and telephone number
  – Name of the Kensington product
  – Make and model of your computer
  – System software and version
  – Symptoms of the problem and what led to them

Kensington and the ACCO name and design are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands. Presentair is a trademark of ACCO Brands. All other registered and unregistered trademarks are the property of their respective owners.

© 2012 Kensington Computer Products Group, a division of ACCO Brands USA LLC. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Computer Products Group. All rights reserved. 05/12

The Kensington Promise

This product comes with a 2-year limited warranty & free technical support www.kensington.com 800-235-6708

Complete warranty terms are available at www.warranty.kensington.com

Kensington Computer Products Group A Division of ACCO Brands 333 Twin Dolphin Drive, Sixth floor Redwood Shores, CA 94065

ACCO Australia Level 2, 8 Lord St Botany NSW 2019 Australia

ACCO Brands Europe Oxford Road Aylesbury Bucks, HP21 85Z United Kingdom

Designed in California, U.S.A. by Kensington Made in China

Patents Pending www.kensington.com

Kensington®

Presentair™

Bluetooth® Presenter, Laser & Stylus

QUICK START GUIDE

Register New Product Now To Activate Warranty! register.kensington.com

S/N:

Getting Started

1 Charge your Presentair™ Bluetooth Presenter Remote on any USB port or charging adapter for 2 hours before initial use or when the front LED blinks orange, indicating the battery is low.

b

NOTE: This device has USB charging function only, and will not appear on your system as a data device when plugged into a USB port.

2 The Rear LED blinks orange during charging. When the Presenter Remote is fully charged, the Rear LED glows solid orange.

Power On/Off

1 From On State—To Turn Power Off Press and hold the Power Button. The Presentair rear blue LED blinks rapidly. Release button, the LED fades off and the power turns off.

2a From Off State—To Turn Power On Press the Power Button for 1 second and release. The blue LED glows, the power turns on, then the LED turns off.

OR

2b From Off State—To Pair Device Press and hold the Power Button from 3 to 6 seconds. The blue LED blinks slowly and Presentair enters Pairing Mode. Release button, it stays in pairing mode for 3 minutes or until paired to a device.

Pairing

On the computer you are pairing Presentair to, be sure the Bluetooth Wireless is on, active, and ready to connect to a device. Follow the Bluetooth pairing instructions from your computer manufacturer for connecting Presentair. Presentair appears as a mouse device for pairing.

NOTE: Your computer's Bluetooth configuration settings need to be set to allow devices to connect to this computer. Some Windows configuration and update settings may interfere with the Bluetooth connection or function. Ensure your Windows services for Bluetooth Service and Support are Started and set to Automatic (found in Administrative Tools > Services). Ensure your Windows Bluetooth power management is not set to turn off your Bluetooth Wireless (found in Device Manager > Bluetooth > Properties > Power Management). Updating Bluetooth Drivers to the latest version found on your equipment manufacturer's website is recommended and may be necessary.

If you experience problems pairing or using Presentair, additional instructions, FAQs, and solutions with illustrations are found in the online guide at: www.kensington.com/man/K39524

Mode Switching

Press and hold the Down Button to switch between Presentation and Media modes.

Presentation mode = Orange LED Media mode* = Blue LED

* Laser does not activate in Media Mode.

Button	Presenter Mode (LED=Orange)	Media Mode (LED=Blue)
Up Button Turns laser on as long as button is pressed.		Play/Pause
Down Button	Black screen Stop
Left Button Page up Previous song/video
Right Button Page down Next song/video