Gerni

7000 - Højtryksrenser Gerni - Gratis brugsanvisning og manual

Find enhedens vejledning gratis 7000 Gerni i PDF-format.

📄 4 sider Dansk DA Download 💬 AI-spørgsmål
Notice Gerni 7000 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.

Brugerspørgsmål om 7000 Gerni

0 spørgsmål om dette apparat. Besvar dem du kender, eller stil dit eget.

Stil et nyt spørgsmål om dette apparat

E-mailen forbliver privat: den bruges kun til at underrette dig, hvis nogen svarer på dit spørgsmål.

Ingen spørgsmål endnu. Vær den første til at stille et.

Download vejledningen til din Højtryksrenser i PDF-format gratis! Find din vejledning 7000 - Gerni og tag din elektroniske enhed tilbage i hånden. På denne side er alle dokumenter nødvendige for brugen af din enhed offentliggjort. 7000 af mærket Gerni.

BRUGSANVISNING 7000 Gerni

WARRANTY

GERNI Warranty Process

Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

GERNI - 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 provides the following warranty in relation to your Gerni Pressure Washer machine.

DOMESTIC WARRANTY

Definition; A machine purchased for domestic household use.

Gemi warrants that, subject to the exclusions and limitations below, the product will be free from defects in the materials and workmanship for the duration of the warranty period from the date of purchase.

2 YEAR STANDARD WARRANTY

Machines & accessories included are as follows: Gemi 3000*, 3300*, 3600*, 5000*, 9000

*Subject to an additional 3 year extended warranty with online registration at www.gerni.com.au 5 YEAR STANDARD WARRANTY

Machines included are as follows: Gerni 5300*, 7000*, 7300*

*Subject to an additional 2 year extended warranty with online registration at www.gerni.com.au 2 YEAR STANDARD WARRANTY

All Gemi accessories are subject to a 2 year standard warranty, to qualify for an exchange of your product you must have proof of purchase*.

*Extended warranty is not applicable to Gerni accessories, only pressure washer machines.

GERNI Warranty Claims

Equipment defects covered by the warranty will be repaired or replaced by one of our Authorised agents within the Gerni organisation. Find your local service agent here: www.gemi.com.au

- If a fault occurs, the user must first take their pressure washer machine to the closest Gerni Authorised Agent to be diagnosed for fault. It is important that you have the pressure washer serial number accompanied with your proof of purchase receipt and a copy of your Gerni online-registration certificate to ensure your pressure washer is covered under warranty.

- If a fault is diagnosed and your machines is inside stated warranty period, then your machine will be repaired or replaced at no cost. If your machine is diagnosed faulty but your machine has fallen outside the stated warranty period, the cost of diagnosis or repair will be covered by the user.

Exclusions:

- The product has been modified, repaired, or serviced by someone other than a Gemi authorised service centre.

• The product has been used other than for the purpose to which it is designed.

- The product has been exposed to user abuse such as knocks, bumps and extreme temperatures conditions.

Gerni 1-23 LETCON DRIVE, BANGHOLME, VICTORIA, AUSTRALIA 3175.

0720

SPECIFICATIONS

VOLTAGE: 230-240V -50Hz

POWER: 2300W

MAX. PRESSURE: 15 MPa (2175psi)

RATED PRESSURE: 14.5 MPa (2103psi)

MAX. INLET PRESSURE: 1 MPa (145 psi)

RATED FLOW: 6.7L/min

MAX. FLOW RATE: 8.3L/min

HOSE LENGTH: 10m

MAX. WATER INLET TEMP.: 40°C

IP RATING: IPX5

WEIGHT: 20.6kg

Gerni 7000 - SPECIFICATIONS - 1

text_image MAX. PRESSURE: 15 MPa (217.3 psi) RATED PRESSURE: 14.5 MPa (2103 psi) MAX. INLET PRESSURE: 1 MPa (145 psi) RATED FLOW: 6.7L/min MAX. FLOW RATE: 8.3L/min HOSE LENGTH: 10m MAX. WATER INLET TEMP.: 40°C IP RATING: IPX5 WEIGHT: 20.6kg Gerni 7* YEAR WARRANTY GPW-7000
Using an Extension Lead Always use an approximate retention loss source for the pilot type of this tool. Before use, receive the extension tool for a range of damage were aged. Because the extension tool from passenger or researcher When using an extension lead on a level, always used the post complexity. Use an extension tool for source for the power type of the that or which is damaged or defective may result in a risk of the anti-elastic friction
Residual Current Device (RCD) The pressure difference must be faster rapidly in regard to current defects, gained at 50% or less. A restoration of dual devices reduces the chance of electric friction
WARNING: When any main-postward foot, basic copy precauture, inducing the synergy should always be followed to realize risk of the weather shock. Personal injury and movement average. Read the code manual carefully and have sure you approach to switch the out-off in an emergency before going by the foot. Save these past phones and other flashcards supplied with a way that is future reception. The weather improve from their designer of 2020 and supply only always check that the power supply correspond to the out-off on the right date. Read the supply of 2000 and 1470 on Grant boat are directed across the Australia and New Zealand. This tool is double insulated; therefore no earth wire is required. Make Double ruler or rose or how the place or normal safety procedure other operating the foot. The reduction sphere is for additional provides up your way resulting from a possible weather recruiting climate within the box
g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Its use of collection on noise 1st-order homes; h. Do not be familiarity gained from frequent use of tools allow you to become compleant. ignore tool safety principles. Chinese similar to outside severe difficulty in a frozen in a second. 4. Power tool and car a. Do not force the power tool. Do not use the correct power tool for your application. The correct power that will be the joo power and sister of the oil well about that geiger. b. Do not use the power tool if the switch does not turn it on and off. By power tool that cannot be somplified with the solar is dangerous and must be repainted. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools but? I put perspective every measures reduce the risk of making the power tool entirely. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the house of internal issues. e. Maintain power tools. Check for all power port or Drip of macking parts. Breaks of parts and any other condition that fail after the blood boy's operation it damaged, the power tool reared before many of the people who are caused by primarily maintenance of power tools. f. Keep cutting tools shang and clean. Properties maintaining acting tools with some curing soles the less love one or are served to pour. g. Use the power tool, accessories and tool bits etc. In accordance with these instructions, taking into account the working conditions and the work to be performed. Use the power tool for the storage of other room water reservoir could set it in herewith of water. h. Keep hardies and grasping furbuds dry clean and free from oil and grease. Supply hard on a good supply purpose conso flow for safe farming and control of the oil in unsemped sunlight. i. Send a. Have your power tool serviced by a quailment repair person using only identical replacement parts. It will errors that necessary of the power tool is maintained
WARNING: I would call a salary, earnings and all income. Cred to above the earnings and income may be paid up for sale through check. And you know that you will be and participate in your pay. See your own's right to pay out." In the earnings refers to other non-operated locally power tool or salary-operated on least power tool.
I won cars safety. a. Keep work area clean and well ill. Or otherwise of dry water or ice accounts. b. Do not operate power tools to exploit atmospheric, such as in the presence of flammable lighing supplies or dust. Power tools are operating so much they may be the rest of house. c. Keep children and bystanders away while operating a power tool. I don't manage or cause you to keep cartrays. d. Have cartrails. e. Power tool plings must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earfied (grounded) power loads. Don't fill the gas and milk by you will be middle to an electric shock. b. Avoid body contact with earfied or grounded surfaces, such as pipes, radishors, ranges and refrigerators. If their air flow is lost in the work but can't only be carried into ground. c. Do not expose power tools to rain or wet conditions. While boiling or dropping tool will increase the oil or oil shock. d. Do not above the cord. Linear use the cord for carrying, pulling or unplugging the power tool. Keep cord away from hand, oil, sharp edges or moving parts. Damaged or retained cold cuts decrease the oil or oil shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use the cond airflow for outside the outlet for air in electric shock. f. Veneration safety. g. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are used or under the influence of drugs, alcohol, or medication in motion or ventilation which operating power tool may result in a transit segmental injury. h. Use a professional protective equipment. Always wear eye protection. Protective easpower such as tooth lines, nor lower safety, hard air, or heating protection used for suppressive or alternate on resource persons like water. i. Prevent unintentional starting. Ensure the switch is in the off-POSITION before connecting to power source and/or battery pack, picking up or carrying the tool. Carving power tools with you to get in the search or triggering power tool that make the switch on horseback. ii. Remove any adjusting key or review before burning the power tool on. In every one or a key enjoy that the next month part of the power tool that result in personal injury. iii. Do not outnumber. Keep proper footing and balance at all times. The reason better control of the power tool in order to ensure. d. Dress prosperity. Do not wear loose clothing or jewellery. Keep your hair, hairling and away from moving parts. Loose clothes, laundry or organ that can be sought in making parts.
Failure to leave the existing one mail in various amounts of airway, directly and/or property demands.
Why are clearing against designated or press air upgrades. The case of their clearing against or encroaches may adversely affect the safety and/or portion of the appliance.
Do not use the appliances within range of patents, where they are professional cleaning.
High pressure ions can be exposed to a subject to noise. The airway must not be affected as passenger.
Inflated, the medicine equipment of the appliance last!
Do not detect the airway against journals or others in order to clean orders or footwear.
To ensure appliance safety, use only original space parts from the manufacturer or owner over by the
healthiness.
High pressure issues, exposure risks are important for the safety of the appliance. Here any issues.
Hounds and outposts removed by the manufacturer.
Do not use the appliances to supply cars or import parts of the appliances and damaged its safety
excesses. High pressure issues, exposure parts.
Walter man has received through a local floor, how it is Exploration to the men's space.
Depending on the application, which uses can be used for high pressure cleaning, others will reduce the
The emission of hortous amounts clearly, however, not all applications allow the use of such a
center, if reduced noise and not applicable for the disposal against air Slovenia, a respiratory mask of
clear FFP or equivalent may be necessary, depending on the cleaning instrument.
The electric supply connection may be much to a outlet of discharges and survey with EC60369-1, t.
It is recommended that the electric supply to this machine should include either a residual source device
It will intend to the canopy if the equipment support to each exceeds 300kA for 30ms or decels that will
provide the route of guide.
Never touch the main delivery or power outlet with other hands.
About disposed out the car from the power outlet when using the machine unscrapped.
The product used to be commenced to receive the machine without shock that protection. Once
Leased and rational planning regulations before connecting the machine in the machine's main modes.
Do not operate the machine at an automobile above a diagnosis.
Paradmissioned and used, it shall be suitable for outdoor sea, and the connection was to be kept dry
are of this group. It is recommended that this is accomplished by means of a corn roll, often keeps
the onset of fire for him down the ground.
It is recommended that a random gate to note itself minimum durations of 12mm (a mile) or the limit
curcement.
WARNING: The procedure is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Unless they have been given supervision or instruction. You go in children amounts be explained to ensure that they could not wish with the procedure. WARNING: Right pressure injection injuries are considered to be medical emergencies. In the even of a high pressure injection into your setting, each medicine acetic immediately. WARNING: 1. Simplified to use Pressure Washers or measures containing bacteria. Patient seeds, fruits, oils, etc. Large numbers of databases that may be released into double, loading instruments health hazard. If ensure that the materials you are prescribing, it's recircumbrant that you proceed with local sound or governance, authority. Before conjoining a tool to a greater source limiting section of main point optopics, conduct, test, be sure that do so easily supply the same as that specif of the macrophiles of the level. Upper sources with voltage greater than that superior. In terms of any result, in serious injury to the case, as well as damage to the tool. In both, no drug play in the task. During a power source which with voltage less than the maniples, adding it harmful to the matter. Unsafe operation of your high pressure charger could lead to severe shock or drain to two or more. The large survivors of a powerful clearing staff could look like on a small. Improve care of all handover can result in links to self-care and complete damage. Reactive force for the same can result in purification movement, potentially causing the operator to sink, fail or misticled charges. Reasons similar with the operator and controls of the pressure charger. Keep hidden how over the pressure cleans or all hands. Never modify or remove the safety measures of this product. Do not operate no machines with missing, broken or unachieved parts. Never leave and understand whole units spending. Keep work without notice of expenses. Stand an audience of shares and giving guidance rules. Beyond the gym to take back book or engaged. Do not use to pump withdrawals or expensive liquids such as toilet, fuel, or waterless containers or timents. Prims should only use with liquid supplies compatible with pressure washer components material.

Gerni 7000 - SPECIFICATIONS - 2

COMPONENTS
Gerni 7000 - SPECIFICATIONS - 3
For general purpose cleaning.
- For removing ingrained dirt. - High impact rotating jet. - Covers a larger area.
- 15" Fan shaped spray. - Twist to adjust pressure. - For general purpose cleaning.

CONNECT TO TAP TAKE A BREAK

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 1
WARNING! High pressure jets can be dangerous if not used properly. Do not direct the jet at persons, animals, live electrical equipment or the pressure washer itself.
WARNING! Perform the procedure below if taking a break for more than 5 minutes. Failure to do so may damage the pump or cause the equipment to overheat and malfunction.
WARNING! High pressure jets can be dangerous if not used properly. Do not direct the jet at persons, animals, live electrical equipment or the pressure washer itself.

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 2

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 3

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 4

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 5

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 6

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 7

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 8

text_image WARNING! High pressure jets Do not direct the jet at persons the pressure washer itself. *NOSE NOT INCLUDED WATER MAX: 1MPa/10bar 40°C

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 9

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 10

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 11

Gerni 7000 - CONNECT TO TAP TAKE A BREAK - 12

STORAGE CARE & CLEANING

Gerni 7000 - STORAGE CARE & CLEANING - 1

flowchart
graph TD
    A["1. Switch off (0)."] --> B["2. Switch off & unplug."]
    B --> C["3. Disassemble accessories."]
    C --> D["4. Rinse accessories."]
    D --> E["5. Clean Nozzles."]
    A --> F["6. Remove Inlet Filter."]
    B --> G["7. Rinse Inlet Filter."]
    C --> H["8. INSPECT; REPLACE IF DAMAGED"]
    D --> I["9. Dry parts before storage."]

Gerni 7000 - STORAGE CARE & CLEANING - 2

text_image Read instruction manual Double insulated Regulatory compliance mark Warning! Wear eye protection Wear gloves Not suitable for connection to potable water mains Warning! High pressure jets can be dangerous if not used properly. Do not direct the jet at persons, animals, live electrical equipment or the pressure washer itself V Volts Hz Hertz ~ Alternating Current W Watts L/min Litres per minute psi Pounds per square inch Mpa Mega Pascals IPX5 Ingress protection from water

Gerni 7000 - STORAGE CARE & CLEANING - 3

flowchart
graph TD
    A["1: Turn off tap."] --> B["2: Switch off (0)."]
    B --> C["3: Drain water from Spray Gun."]
    C --> D["4: Remove water hose."]
    D --> E["5: Disconnect Spray Gun."]
    E --> F["6: Switch on (1)."]
    F --> G["7: Drain High Pressure Hose."]
    G --> H["8: Switch off (0)."]
    H --> I["9: Switch off & unplug."]
    I --> J["10: Dry parts before storage."]
Vejledningsassistent
Drevet af Anthropic
Venter på din besked
Produktinformation

Mærke : Gerni

Model : 7000

Kategori : Højtryksrenser