SLBCAM20 - Babyalarm SereneLife - Gratis brugsanvisning og manual

BRUGSANVISNING SLBCAM20 SereneLife

SereneLife

Two modern baby care devices, one displaying a sleeping photo and the other a digital camera (no visible text or symbols)

SLBCAM20EU - SLBCAM20UK

VIDEO/AUDIO BABY SECURE MONITOR

Portable Wireless Baby Secure Monitor

Powered By Two-Way Microphones & Speakers

USER MANUAL

TABLE OF CONTENTS

1. Safety Instructions 6
2. Getting Started 7
   2.1 Baby Unit Power Supply 7
   2.2 Parent Unit Power Supply 8
3. Using the Baby Monitor 9
   3.1 Setting Up 9
   3.2 Pairing Camera 10
   3.3 VOX Function 10
   3.4 Music Player 10
   3.5 Talk Function 10
   3.6 Adjusting the Volume 10
4. Monitoring Screen Icons 11
5. Monitor Scott 12
6. Menu Options 12 5.1 Main Menu 12
   5.1 Main Menu 12 5.2 Course Curriculum 13
   5.2 Camera Registration 13 5.2 AI 13
   5.3 Alarm 13 5.4 Settings 14
   5.4 Settings 14 5.5 VOY 15
   5.5 VOX 15 5.6 Languages 15
   5.6 Languages 15 5.7 System Info 15
   3.7 System info 16

7. TECHNICAL FEATURES 16

8. TECHNICAL FEATURES

This User's Guide provides you with all the information you need to get the most from your product. Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

1 x Parent Unit

1 x Baby Unit

2 x Power adapter

1. Safety Instructions

WARNING:

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.
  • This product is not a toy.
  Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm's reach of the baby (at least 1 meter away).
• Keep the cords out of reach of children.
• Do not use the baby monitor near water or a heat source
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

Overview of your Parent unit

1. Power Key
2. Power adapter connector
3. Lcd display
4. Microphone
5. Power / Signal indicating led
6. Charging indicating led
7. VOX Key
8. Music play on/ off key
9. PTT Key
10. Speaker
11. OK / Menu Key
12. Return Key
13. Volume + / Up
14. Volume - / Down

Overview of your Baby unit

1. Light Sensor
2. Camera Lens
3. Power indicating LED
4. Microphone
5. Infrared LED
6. Power Key
7. Power adapter connector
8. Temperature Sensor
9. Pair key
10. Speaker

2.2 Parent unit Power Supply
2. Getting Started 2.1 Baby unit power supply

Line drawing of a handheld device with a cable and screen (no text or symbols)

1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket.

NOTE: Only use the power adapter provided

1. A blue light led will display indicates the baby unit is working.

Line drawing of a portable electronic device connected to a cable (no text or symbols)

Charging the parent unit fully before use is recommended. This will allow the unit to operate battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket

NOTE: Only use the power adapter provided

1. The charging LED will illuminate means the battery starts charging
2. Push the power key ON to turn on the parent unit.

3. Using the Baby Monitor

3.1 Setting Up

Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

Technical line drawing of a camera and its side panel assembly (no text or symbols)

NOTE

Do not place the baby unit within baby's reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.

9

3.2 Pairing camera

The enclosed baby unit has already been registered, You do not need to register it again unless the baby unit loses its link with the parent unit. See section "5.2 Camera Registration" for more details.

3.3 VOX Function

Press VOX key will turn on VOX mode, The VOX mode automatically puts the display in sleep mode to save battery. It reactivates automatically, when it detects noise in the baby's room.

3.4 music player

Press music key will turn on the music player and play lullaby through the baby unit; press music key again will turn off it.

5 Talk function

Press and hold PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.

3.6 Adjusting the volume

When the video is playing mode, press Volume-key to decrease volume or Volume+ key to increase volume. The display will show the current volume for 5 seconds.

10 11 12

1. Monitoring Screen Icons
   

1. Signal strength indicator
2. Temperature of the baby's room
3. Lullaby is playing
4. Vox function activated
5. Alarm activated
6. Battery indicator
7. PTT function activated

8. Date and time (HH:MM AM/PM DD/MM)

9. Menu Options
   5.1 Main menu
   

Press "OK/Menu" key at monitoring screen will

enter the main menu, It contains 6 items:

1. Camera
2. Alarm
3. Settings
4. VOX
5. Languages
6. System info

You can press the "Up" key or "Down" key to move the cursor to select an item and press "Menu" key will enter the sub-menu which you selected.

Press "Return" key will back to monitoring screen

5.2 Camera Registration

Press "OK/Menu" key to entry registering screen, then push the pair key on the back of baby unit within 10 seconds.

5.3 Alarm

Press "PTT" key to move the cursor and "Up/Down" key to change value.

5.4 Settings

5.4.1 Time and date

There are contains 2 items in this menu

Set time/date

Set format

Press "PTT" key to move the cursor and "Up/Down" key to change value.

4.2 Temperature unit

Switch the unit to Celsius or Fahrenheit

5.4.3 Anti-flicker

You are able to adjust the frequency of 50/60 HZ to suit your lighting for anti-flicker

5.4.4 LCD backlight

You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.

5.5 VOX

5.5.1 System mode

This menu allows you to choose the working

mode from the following:

Normal mode/VOX mode

5.5.2 VOX Sensitivity

Switch the Vox sensitivity at Low/Medium/High level

5.6 Language

Language setting menu allows you to choose your language from the following:

English

French ( Francais )

Spanish (Espanol)

Portuguese ( Portugues )

Italian ( Italiano )

German (Deutsch)

Turkey (Turkce)

5.7 System info

Contains system information such as Project id,

Hardware version, software version, build date etc.

6. TECHNICAL FEATURES

• Frequency: 2.4 GHz Digital
- Modulation Mode: GFSK
- Operating temperature: -10 to +45°C
- Operating Humidity: <85%
- Wireless Operation Range: Up to 260meter (850' ft.)

MONITOR

• LCD: 3.2 " TFT LCD
  • Resolution: 320X240@20fps
  • Battery: Li-Polymer 750mAh
  • Dimensions (L x W x H): 11.9 x 1.78 x 7.11 cm

CAMERA

• Sensor: 0.3Mega pix CMOS
  • Minimum Illumination: 0Lux (IR on)
  • Night Vision Distance: 15ft (5m)
• Lighting Sensor
  • Temperature sensor
  • Dimensions (L x W x H): 6.60 x 2.54 x 10.6 cm

Questions? Issues?

We are here to help!

Phone: [phone] Email support@pyleusa

Email: [e-mail]

14 15 16

This product can expose you to a chemical or group of chemicals, which may include "Nickel Carbonate" which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.