Grand Prix C0 - Tørretumbler WHIRLPOOL - Gratis brugsanvisning og manual

BRUGSANVISNING Grand Prix C0 WHIRLPOOL

GRAND PRIX CO GB

QUICK REFERENCE GUIDE

Please also carefully read the

"Instructions for Use".

Water channel Kaleon Extra double - Kastline -* Synthetoch LW10 single - Kastline -* Methodeine - Extra-delican Start Phase + 100 +40 +40 Kwadherat Start Substrate pump Dachemeter Epsene Zimmer 400 gm 6 Kg

	Very Wet Load	Wet Load	LoadKg	Drying options		Gentle & Rapid cannot be selected together		Buzzer & Anti-Crease cannot be selected together
	Indicative drying times (in minutes)			Fabric programmes & Drying levels		Beschermen Gentle Reduces drying intensity (recommended for delicate items)	Expres Rapid Shortens drying duration (recommended for small items)	Zoemer Buzzer Signals/ Sounds end of drying cycle at Intervals	Anti-kreuk+ Anti-Crease Prevents laundry from creasing	Start Selectie uren Start Delay Delays the drying cycle start
Cotton	85'150'	70'120'	3.06.0	CottonKatoenMax 6 kg	Extra droog Cupboard dry +	Katoen	Katoen max 3.5 kg	Katoen	Katoen	Katoen
	80'130'	60'110'	3.06.0		Kastdroog Cupboard dry *	Katoen	Katoen max 3.5 kg	Katoen	Katoen	Katoen
	60'110'	50'85'	3.06.0		Strijkdroog Iron dry *	Katoen	Katoen max 3.5 kg	Katoen	Katoen	Katoen
Synthetics	30'55'	25'45'	1.02.5	SyntheticsSynthetischMax 2.5 kg	Extra droog Cupboard dry +	Synthetisch	-	Synthetisch	Synthetisch	Synthetisch
	25'45'	20'35'	1.02.5		Kastdroog Cupboard dry *	Synthetisch	-	Synthetisch	Synthetisch	Synthetisch
	20'35'	15'25'	1.02.5		Strijkdroog Iron dry	Synthetisch	-	Synthetisch	Synthetisch	Synthetisch
Delicate Plus	30' 20' 1.5			Delicate PlusExtra-delicaat1.5 kg	Specially indicated for very delicate garments.	-	-	Extra-delicaat	Extra-delicaat	-
Airing	-	-	-	Airing Koudefase	Laundry is aired and refreshed for 30 minutes without heating.	-	-	Koudefase	Koudefase	Koudefase
Time	-	-	-	20'40'60'	Completes drying or dries single items (suitable for all fabrics).	-	-	20'40'60'	20'40'60'	20'40'60'

Start Pause Start (Pauze)	Starts the drying cycle. The drying indicator lamp is blinking during the selection phase. Press to confirm the final selection.
	Delays the drying cycle start from 1 up to 9 hours. To select the start delay turn the programme selector knob to the desired programme, select the desired options and press the start delay button. With each touch of the start delay button, drying cycle start is delayed by one hour. Press the Start/ Pause button to confirm your final selection. Start delay indicator blinks and the count-down is running by reducing the time in one hour steps. The count-down is indicated by the blinking of the start delay indicator located in the button. During count-down the drum will turn from time to time to redistribute the laundry and the pump may be heard working for a short time. To cancel or to change the previously set time turn programme selector knob to "0" or open the door.
Start delay Start Selectie uren
Remaining time indication Bestityd wen run 2-20 wen	After cycle start a default drying time is indicated depending on the selected drying programme. After 15 seconds the time will be adjusted to the real expected remaining time, depending on size, type and humidity of the load.
Anti-Crease Protection Anti-kreuk+	Re-distributes laundry in the drum. When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs. During the count-down the drum will turn from time to time to redistribute the laundry.
Filter Pluizenzeef	The indicator lamp lights up when the filter needs cleaning. Clean the filter at the end of every cycle.
Water Container Water container	Lights up when water container needs to be emptied. The drying cycle is automatically interrupted. Empty the water container. Press the Start/ Pause button to restart the dryer and to continue the programme.
Overdry protection Sense	The indicator lamp lights up when a humidity controlled program is selected, to indicate the working protection function. Function is not active in time controlled programs 20 and 60 Airing.
PROGRAMME SEQUENCE INDICATORS
Overdry Protection Drying End Anti-crease Anti-Crease	Lit: Overdry protection is working Lit: programme is running. Lit: End of programme. Lit: Anti-Crease is running.

* Test programmes according IEC 61121

5019 307 00327

PREPARING THE LAUNDRY

1. Check that all fastenings are closed and that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make sure it doesn't become tangled.

Sort laundry as follows:

A) By care symbols (on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only

Do not tumble dry

B) By amount and thickness/weight Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C) By type of fabrics Cotton/linen: Towels, cotton jersey, bed and table linen made of cotton or linen. Synthetics/Easy Care: Blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D) By drying level - Sort into: iron dry, cupboard dry, etc. Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryer-safe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer.

SELECTING A PROGRAMME & OPTIONS

Programme and Options:

- To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, "Indicating that the cycle needs to be started.

- To select an option, press the corresponding button. The indicator light in the button lights up confirming that the selection has been made.

- Press the option button again to cancel the option.

STARTING & COMPLETING A PROGRAMME

1. Having selected the desired programme and options, press the Start/Pause button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing. This Anti-Crease cycle can be extended up to 12h when Anti-Crease option has been selected.
2. On completion of the programme, set the programme selector knob to position "0".

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The Start/Pause indicator lamp is blinking “◇”

To operate the new programme, press the Start/Pause button.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1. Set the programme selector knob to Airing.

2. Press the Start/Pause button. Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3. To restart, after door opening, close the door and press the Start/Pause button again.

DAILY MAINTENANCE & CLEANING

Clean the lint filter at the end of every drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Open the filter.

4. Remove lint using a soft brush or your fingertips.

5. Close the filter.

6. Push the filter back into place .

Empty the water container at the end of every drying cycle.

1. Pull the handle to remove the water container.

2. Empty the water container.

3. Replace the water container when empty by pushing it completely back in place.

DRAINAGE SYSTEM

The 6 kg cotton programmes are made for matching a 6 kg washed load of cotton spun at more than 1000 rpm. With a 6 kg load spun at lower speed than 1000 rpm, we recommend to connect your dryer to an external drainage hose for direct water drainage to avoid water container emptying. This is also valid for testing according the standard IEC/EN 61121

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

- Was the correct programme selected?

- Was the inserted laundry too wet?

- Is the lint filter dirty (filter indicator lamp on)?

- Is the heat exchanger dirty? (refer to the Instructions for use)

• Is the ambient temperature too high?

The dryer does not operate:

(after a power failure and/or interruption to the mains supply, always press the Start/Pause button).

- Is the plug properly inserted into the mains electricity socket?

• Is there a power failure?

- Has the fuse blown?

- Is the door properly closed? - Has the programme been selected? - Has the Start/Pause button been pressed?
Lint filter or water container indicator lamp light on:
- Is the lint filter clean?
- Is the water container empty?
- Is the water container correctly positioned?
- Is the heat exchanger clean?

Water droplets underneath the dryer:

• Is the heat exchanger correctly positioned?

- Has any fluff on the heat exchanger seal been wiped away?

- Has any fluff on the door seal been wiped away?

- Has the water container been positioned correctly?

All programme sequence indicators blinking:

• Service call necessary.

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

- The service code (the number after the word Service on the adhesive rating plate) on the right-hand side when the door is open.

- Your full address and phone number.

SERVICE

0000 000 00000