258 - Modtager MERIDIAN - Gratis brugsanvisning og manual

BRUGSANVISNING 258 MERIDIAN

Important safety instructions

- Read the instructors.

- Keep these instructions

- Follow some limitations. - Do not use this record in your water.

- Clean only with a supply chain

• Ielschelb in accordance with the manufacturer's instructions.

- Roter all servicing to approved service personnel

WARNING: TO REPLACE THE RISK OF EFE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

This series are best described with Class 1, conclusions and

This apparatus has been designed with class I constructed and must be connected to a main socket outlet with a protective

scirring connection (the third grounding pin).

This generation, now a circle rule measure watch. As a result it is

not isckled from AC using power when stahloned off at the rear

panel. The appendix may be isolated from trans power either by

unplugging the power connector from the rear of the unit, or by

unplugging the connector at the epoxy end of the power cord

or cable from its supply outlet. As a result, either at both of these

connectors should have

Safety warnings

Caution: To reduce the risk of electric shock, or not remote cover. No user sensitive parts inside. Refer sending to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of unisubject 'margorous valents' within the product's enclosure, then may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclusion point will be an expensive way: a intended to start the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appearance.

IP20 Equipment

Climate

The equipment has been designed for use in moderate climates and in dramatic silhoues.

Only use at an altitude not exceeding 200cm.

Safety warnings

- Do not choose the unit to drag up or splashing.

- I can not place any object that with liquid, such as a one, on the unit

- Do not place naked flame sources, such as lighted candles, on

the unit.

To avoid overheating

- Do not position the product in direc sunlight.

- Do not position the product reset test sources, such as a

radator.

- Leave at least 10cm around the product to ensure sufficient

•en/kli

Siting

Do not place the power amplifier.

•

• Friday 80 Right • New York on you

- Real news sources, such as a radiois.

- Lira sol. 801956, such as 9 September.

Radio interference

EOG Waiting: This is an organic product with a positive rate

frequency energy and if nor in-halad and used comedy in

accordance with our instructions may cause interference to radio

communications of radio and television reception. It has been

^7 po-tested and examples with the limits set out in Subpart I,

Part 10 at FCC rules for a Class II computing device. These limits are allowed to provide reversible operation required each

where the interest to provide reasonable protection against such antagonists in home popularity.

CE

CEO: This product has been designed and type-lesed to comply with the limits set out in EN50027015 and EN50024010 - A19016.

Introduction

The Mendon Eight Channel Amplifier 200 is a powerful, high-performance, cool-running Class-D amplifier that can deliver more than 100W per channel into 40, or more than 70W per channel into 80.

The featured high efficiency ( >95% ) Class D amoliters procure

very little heat, allowing farless operation with eight independent

character is a 11 enclosure; it is true by designed to allow

Huppe 25-105.

The 253 uses andophile components, resulting in a level of

performance, typically associated with paracor-equifers officers.

at a significantly higher price. Separate revenue of 1 cupdators one for the employees of a multi-grown construction in a compact

The gradual change in the course of this construction is a part of the process. This also requires signal patterns and improvements.

solution between

The 255 uses a linear power supply, which provides isolation from the AC supply and offers both sound quality and intrinsic durability. It is based on a massive low noise thermal power transformer with an electronic tip for protection against short circuit or overlapping. An indicator on the front panel shows the status at standby, on, or hot. Back panel indicators show the status or each channel.

Unpacking

The Eight Channel Amplifier 250 is supplied with the following

8171:88

Power cord.

- Self-schesive feet for non-rack installation

- kiting -pasket operators.

- This manual.

If any of these items are missing please contact your retailer

NOTE: You should retain the according to case you once he

I cannot be until

Stanley

Once set up, the power amplifier can be left in standby as it

consumes minimal power in this mode.

it you are not going to use the power amplifier for a period of

several days you should switch off the unit completely, at the

back panel and disconnect i. from the AC power supply

Back panel

The following diagram gives details of the back pane connections:

Output 5 Output 7 Output 6 Output 5 Output 4 Output 3 Output 2 Output 1 Fuse

Audio inputs

Use this input To connect to this

log 1.1 in size & The matrix of source cells

moderate ad hoc ad hoc plan

注：

Loudspeaker outputs

Use this output To connect to this

Output 1 +/- to Output 2 +/- Load speakers of between -1Ω

my: RQ, using Pheno plugodin

2-way terminal blocks, 120/NG/

205

Communications connections

Use this connection To connect to this

1. 2017

precompfeier or control system

which else is also being

the power amplifier out of

standy

Indicators

An indicator for each channel on the back panel shows that the

another is out of standby and that the Class D modulator for this

cassous is n.00ng

Operation

After supplying power the amplifier comes out of standby

sulatively after four seconds.

The indicator on the final point shows the value:

Indicator	Status	Explanation
Blue	Sundry	Press the button to switch the second letter between an and another.
White	Normal	Normal operation.
Red	Crudeload	Outputs must.
		The output of a sample when the supplier has cooled down.
Black	Treaded	Amplify off, caused by a fault just as set up with a DC shelf as a solution outlet.
		Connect the fault, then reset by turning off the power of the back panel and then on again.

To connect to four Meridian 218 Zone Controllers

graph TD
    A["Raw Material Input"] --> B["Material 1"]
    B --> C["Material 2"]
    C --> D["Material 3"]
    D --> E["Material 4"]
    E --> F["Material 5"]
    F --> G["Material 6"]
    G --> H["Material 7"]
    H --> I["Material 8"]
    I --> J["Material 9"]
    J --> K["Material 10"]
    K --> L["Final Product Output"]

    subgraph Inputs
        M["Raw Material Input"] --> N["Material 1"]
        N --> O["Material 2"]
        O --> P["Material 3"]
        P --> Q["Material 4"]
        Q --> R["Material 5"]
        R --> S["Material 6"]
        S --> T["Material 7"]
        T --> U["Material 8"]
        U --> V["Material 9"]
        V --> W["Material 10"]
    end

    subgraph Quality Control
        X["Quality Control"] --> Y["Quality Control"]
        Y --> Z["Quality Control"]
        Z --> AA["Quality Control"]
        AA --> AB["Quality Control"]
        AB --> AC["Quality Control"]
        AC --> AD["Quality Control"]
        AD --> AE["Quality Control"]
        AE --> AF["Quality Control"]
    end

    style Inputs fill:#f9f,stroke:#333
    style Quality Control fill:#ccf,stroke:#333

To connect to a zone matrix switch

graph TD
    A["Input Data"] --> B["Data Processing 1"]
    B --> C["Data Processing 2"]
    C --> D["Data Processing 3"]
    D --> E["Output Data"]
    style A fill:#f9f,stroke:#333
    style E fill:#bbf,stroke:#333

Use this application to connect up a four zone system using four Meridian 216 Zone Controllers, using the 256 Multi Charne
- Santa Amelita in parse and part of the back-stakes for this idea.
- Connect the outputs from the Mul Channel Power Amplifier to loudspeakers, using loudspeaker cables.
- Connect the Analogue Out sockets on each Zone Controller to two of the Input sockets on the Multi Charne Power Amplifier.
- Connect the Analogue in select to each Zone Contralier to the analogue source for last zone.
- Connect the Network sockets en each Zone Controller to an Internet Hauer.
You can now control the system via the network from a Meidian Service system.

Use the application to connect an 6-zone audio matrix switch to two 258 Multi Clums Power Amplifiers, which include the role of loudscapers in each of eight zones.

• Connect the outputs from the Multi Channel Power Amplifier to loud-pockers using loud-pocker tables.
• Connect the analogue outputs for such zone on the matrix switch to two of the input sockets on the Multi Channel Power Amplifier.
• Connect the analogue source for each node to the corresponding analogue inputs or the matrix switch.
• Connect the network input on the main switch to the Internet Router.

Specifications

Audio inputs

• ECG-RCA input (16x0)

1.24 RMS

Audio outputs

• First terminal blocks supplied

with using researchers

suitable for 12 24 AWG wire

Characteristics

• >0GW per channel into O

or >70W per channel info

ên.

Control signals

- Trigger input: 3.5mm

3/402
Controls
- Sandby solar with m color
for standing/en/rel
- Black panel indicators for
each amplifier.

Acknowledgements

Maides is a registered lock.

mark of Martian Audio Ltd.

Speaker Link is a trade mark of Microsoft Audio Ltd.

(1) AD = BD = 2AB,AB = AC

Copyright © 2018 Meridian Funds Ltd.

AOS Ltd

Pat number: P89450

Designed and manufactured

In the UK by Meridian Auto

Ltd. Meridian Audio reserves

He right to make changes

and improvements could

The planker described in the

Figure 4.1.3.2017

Rajasthan pair Median Fig

Channel/MPaper 250 st:

www.cidl-90-sada.com/

841301

Physical

- Dimensions: 480mm x 44mm

< 860mm (18.9" x 1.75" x

14.1门

(W×H×D)

• m_1 + m_2 + m_3 + m_4 + m_5

- Stand-store of mo

10.23

Power

• Linear power supply with

trip

• 3W standby, 520V max.

This product is available history

prosed in the following vellops

cptice

1704.20.50.894

• U.S. 40-52-60H

2016年10月3日

(2) 10.4.16

Meridian Audio reserves

the right to amend product

specifications at any time.

Sales and service in the UK

Mendin Audio Ltd

Lalbany Bocel

Huangood

PEV OYE EX

7.1.16.20:12:14

Tel: [phone]

(52)4-101497440380

Visit us or the Web

http://www.cifis-suho.com/

Eight Channel Amplifier 258

User Guide

MERIDIAN