Special-T

Sienna SIEN-30 - Bord Special-T - Gratis brugsanvisning og manual

Find enhedens vejledning gratis Sienna SIEN-30 Special-T i PDF-format.

📄 1 sider Dansk DA ⬇ Download 💬 AI-spørgsmål
Notice Special-T Sienna SIEN-30 - page 1
1 / 1
Pick your language and provide your email: we'll send you a specifically translated version.

Brugerspørgsmål om Sienna SIEN-30 Special-T

0 spørgsmål om dette apparat. Besvar dem du kender, eller stil dit eget.

Stil et nyt spørgsmål om dette apparat

E-mailen forbliver privat: den bruges kun til at underrette dig, hvis nogen svarer på dit spørgsmål.

Ingen spørgsmål endnu. Vær den første til at stille et.

Download vejledningen til din Bord i PDF-format gratis! Find din vejledning Sienna SIEN-30 - Special-T og tag din elektroniske enhed tilbage i hånden. På denne side er alle dokumenter nødvendige for brugen af din enhed offentliggjort. Sienna SIEN-30 af mærket Special-T.

BRUGSANVISNING Sienna SIEN-30 Special-T

Round and Square Bases (Sienna Table) Assembly Instructions

Parts Included:

  1. Top Plate

  2. Column

  3. Floor Plate

  4. Hardware: Hex Head Bolts (3)

Special-T Sienna SIEN-30 - Parts Included: - 1

Special-T Sienna SIEN-30 - Parts Included: - 2

Special-T Sienna SIEN-30 - Parts Included: - 3
Flat Head

Special-T Sienna SIEN-30 - Parts Included: - 4

Special-T Sienna SIEN-30 - Parts Included: - 5

Washer (3)
Special-T Sienna SIEN-30 - Parts Included: - 6
Hex Wrench (1)

If you are missing parts or have any questions, please call Customer Service at 888-705-0777.

Special-T Sienna SIEN-30 - Parts Included: - 7

Hex Key (1)
Special-T Sienna SIEN-30 - Parts Included: - 8

Base Assembly

Special-T Sienna SIEN-30 - Base Assembly - 1

natural_image Technical line drawing of a circular component mounted on a square base with mounting holes (no text or symbols)

Table Assembly

Special-T Sienna SIEN-30 - Table Assembly - 1

natural_image Pure diagram of a mechanical or electrical component with no text, numbers, or symbols

ATTENTION: Due to sensitive nature of the stainless steel, use extreme care when assembling a base to avoid accidental dents and scratches.

Instructions

You will need 2 people to assemble this base.

Base Assembly

  1. Place mounting plate on one end of a column. Insert lock washers inside the hex head bolts. Start 3 hex head bolts with lock washers inside by hand first, then tighten with a hex wrench.

  2. Turn the column over and place mounting plate on the floor. Carefully place center of the floor plate over the column, and align the holes. Use the remaining 4 flat head bolts to secure the column. Tighten the bolts with the hex key.

Table Assembly

  1. Lay table top upside down on cardboard or carpeted surface.
  2. Position assembled base(s) in the center of the table top or align holes in mounting plate(s) with pre-drilled holes in the top. Use wood screws to attach the top. Use every hole in the mounting plate(s).
  3. Holding onto the edges of the top, carefully turn the table over in the upright position.
  4. Use stainless steel cleaner and soft cloth to remove finger prints or stains from the base. Enjoy your table!

09.2014

Indholdsfortegnelse Klik på en titel for at få adgang til den
Vejledningsassistent
Drevet af Anthropic
Venter på din besked
Produktinformation

Mærke : Special-T

Model : Sienna SIEN-30

Kategori : Bord