KID XP - Bilstol Britax-Römer - Gratis brugsanvisning og manual

BRUGSANVISNING KID XP Britax-Römer

PAGE I

1. PRODUCT OVERVIEW
   

③ Belt holder (dark red) ④ Belt guide (bright red)
Seat cushion XP-PAD
02 Adjusting handle of the headrest 03 Storage compartment
Backrest

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating instructions of your vehicle. This seed can be used in vehicles with a 3-point ball. Please find the information on the seats approved for child safety seats of the weight, because to 30 kg in the operating instructions of your vehicle.

The KID XP is approved for one method of installation:

Symbol installation type Approval type
	with the vehicle a 3-point seatbelt	universal

You can use your child safety seat as follows:

(1) 2017年1月1日

In the direction of travel yes
against the direction of travel no	31
with 2-point belt	no
with 3-point belt2	yes
in front passenger seat	yes32
on outer rear seat	yes
on centre rear seat (with 3-point belt)	yes33

1) Use is permitted on a nearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect of an airbag.

2) The safety belt must be approved

bell with an "E" or "a" in a circle).

3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions in vehicle owner's manual.

4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.

5. CARE AND MAINTENANCE

Please ensure that you only use the original BRITAX ROMER replacement seat covers, as the seat cover is an integral part of the child safety seat and tullife important functions to ensure the smooth operation of the system. Replacement seat covers are available from your dealer or from an ADAC office.

- The cover can be removed and washed with a mild detergent in the delicates programme of the washing machine (30 °C). Please observe the instructions on the washing label of the cover.

- The plastic parts and the XP-PAD can be cleaned with a soap and. Do not use any caustic clearing agents (such as solvents).

DANGER! The child seat must not be used without the seat cover.

Removing the seat cover

1. Moving the headrest of the vehicle seat into the top position.

2. Unhook the cover hook 18 on the rear of the backrest.

3. Remove the top part of the cover and fold it forwards to the spot surface.

4. Unlook the cover hook 19 on the front of the backrest

5. Pull the cover all of the head surfaces

Removing the headrest cover

1. Unlock the cover loop 20 on the rear of the backrest.

1. Unknut the cover book 18 on the front of the backrest.
2. Pull off the cover of the headrest 22.

The power can now be washed, please observe the

Re-fitting the cover

Proceed in reverse order to pull on the cover

2. INTRODUCTION

We are delighted that our KID XP can safely accompany your child through a new stage in its life.

In order to protect your child correctly, the KID XP must always be used and installed as described in these instructions.

If you have any further questions regarding its use, please feel free to contact us: BRITAX HOMEII

Konzescheret GmbH Blaubauer Straße 71 D-2007 Ulm Germany T: +49 (2) 73: 5045-12 E: +48 (7) 78: 6845-21 C: [e-mail] www.romer.ru

BRITAX EXCELSIOR LIMITED 1 Church: Way West Andover Hamashing SP10 3L7N United Kingdom T: [phone] F.: 144 (5) 1264 334148 E: hr pl reff. k bftcm europe com sene lae.

These instructions use the following symbols stated below:

Symbol	Keyword Explanation
⚠️	DANGER! Risk of severe personal injury
⚠️	WARNING! Risk of minor personal injury
⚠️	CAUTION! Risk of material damage
⚠️	TIP! Useful notes

Instructions that follow a set sequence are numbers.

Example: 1. Press the button...

Bell guide colours

For better differentiation, the two vehicle seat bells are highlighted in different colours. The diagonal seat bell for in dars red and the top bell

15 in bright red. The colour of the bell guidee on the child safety seat follows the same colour

scheme.

6. DISASSEMBLY AND DISPOSAL

UNFASTENING YOUR CHILD:

1. To unfason your child, use the release button of your vehicle seat buckle. TIP! The XP-PAD can remain applied for easier use on the diagonal belt of your vehicle, the diagonal belt must be reforested before every journey; sac: Section 10 step 12 [page II].

REMOVAL:

1. Operate the release key of your vehicle seat buckle

2. Open the XP PAD 04 on the Velcro fastener and

3. Open the dark red bell holder 01 by pressing backwards the key on the bell holder 01 and unthreading the diagonal bell (c)

01 The child safely seal can now be removed.

DANGER! the child safely seal must always be secured when it is in the vehicle, even if no child is being transported.

DISPOSAL:

Please observe the waste disposal regulations in your country.

Disposal of packaging	Container for cardboard boxes
Seat cover	Residual waste, thermal utilisation
Plastic parts	According to the labeling in the corresponding container.
Metal parts	Container for metals
Beit straps	Container for polyester
Buckle end tongue	Residual waste

1. Certification

BRITAX RÖMERChild safety seat	Testing and certificationIn accordance with ECE® R 44/04
	Group	Body weight
KID XP	II + III	15 to 36 kg

* LCL = European Slenders for Child Safety Equipment

The child safety seat has been designed, tested and certified according to the requirements of the European Standard for Child Safety Equipment (ECE R 44/03). The seat of approval E (in a circle) and the approval number are located on the orange approval label (sticker on the child safety seat).

DANGER! The approval will be invalidated if you make any modifications to the child safety seat. Only the manufacturer is permitted to make modifications to the only safety seat.

WARNING! Use the KID XP exclusively for securing your child in your vehicle. It is in no way suitable as a seal or loy in the home.

DANGER! Never secure your child or the child safely seat with a 2-point belt. If you secure your child in the child seat, with only a 2-point belt, then in the event of an accident this may cause serious injuries to your child, possibly resulting in death.

15 to 36 kg (\~4 to 12 years of age)

KID XP

User instructions

GB

Illustration of a car comfort seat with red ribbon (no text or symbols)

www.britax.eu

PAGE II

7. SAFETY NOTES

Please take the time to read these instructions carefully and keep them to hand in the intended storage compartment. On the child safety seat at all times! The instructions must be with the child safety seat if the latter is passed on to a third party.

△ DANGER! For the protection of your child:

- In the event of an accident with a collision speed of more than 10 km/h, the child safety seat may be damaged without the damage becoming immediately visible. In this case the child safety seat must be replaced. Please dispose of it properly.

- Have your child safety seat checked as a rule if it was damaged (e.g. if it fails to the ground).

- Regularly check all important parts for damage. Ensure that all mechanical parts, in particular, are fully functional.

- Never applicate in part of the child seat. - Name: www.veu. child unallocated in the child seat in the vehicle.

- Let your child in and out of the vehicle from the pavement side as a rule.

- Protect the child safety seat against intensive direct sun radiation.

as long as this for it uses. This third safety shall turn beyond. Very high under direct sun radiation. Child skin is sensitive and could thereby be injured.

- The more angry the harness fits over your child's body, the better your will be protected. Therefore avoid pulling think dollars on your child under the bell. - Take regular breaks on long journeys in order to give your child the opportunity to play around.

- Use on the rear seat. Push the front seat forwards sufficiently so that the feet of your child do cannot hit the backrest of the front seat (to avoid the disc of injury).

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or objects may cause injury to other vehicle occupants. Please always check that...

- the backrests of the vehicle seats are locked (i.e., that a foldable rear seat bench latch is engaged).

- all heavy or sharp-caged objects in the vehicle (e.g. on the parcel shelf) are secured.

- all persons in the vehicle have their seatbelts fastened - the child safety seat is always secured when it is in the vehicle, even if no child is being transported.

WARNING! For your protection when handling the child seat:

- Never use the child safely seat frog-standing, not even for test sitting. - When swiveling up the backrest 67, nothing must come between the backrest 67 and the seat cushion 63. You or your child could pinch your fingers, injuring them.

- To avoid damage, ensure that the child safety seat is not jammed in between hard objects (car door, seat rails, etc.).

- Keep the child safety seat in a safe place if it is not in use. Do not place any heavy objects on the seat and do not store it directly next to sources of heat or in direct sunlight.

CAUTION! To protect your vehicle:

- Certain car seat covers made from more sensitive materials (e.g. colour, leather, etc.) may sustain signs of wear and tear when using child safety seats. For the optimum protection of your car seat covers, we recommend using the BRITAX ROMER child safety seat surface from our accessories programme.

8. ADJUSTING THE HEADREST

A correctly sat headrest 22 ensures that the diagonal seat belt section 10 is pulmately positioned, and gives your salt platinum protection.

The headrest 22 must be adjusted so that there is a space two fingers wide between the headrest 22 and your child's shoulders.

To adjust the height of the headrest to fit your child:

1. Reach into the adjustment handle us on the back of the headrest 22 and pull it towards you. This university the headrest

2. You can now move the unlocked headrest 22 to the desired height. As soon as you release the adjustment handle (as, the headrest 22 will lock into place.

3. Place the child safety seat on the vehicle seat.

4. Have your child sit down in the child safety seat and check the height. Repeat the procedure until the headrest 22 has the correct height.

9. INSTALLATION

With 3-point belt

The KID XP is not installed permanently in the vehicle. It is simply secured together with your child using the vehicle's 3-point scalbert.

1. Carry out the steps in Section 8, ADJUSTING THE HEADREST.

2. Place the XP-PAD 04 on the side of the child safety seal closer to the vehicle door.

3. Guide the elastic holding strap of the XP-PAD 04 into the dark red belt holder of the headrest until it lies completely in the belt holder (1) and is not twisted.

4. Place the child seat on the vehicle seat. Ensure that the beckrest 07 is flush with the beckrest of the vehicle seat.

TIP! If the headrest of the vehicle seat gets in the way, turn if the other way.

1. Carry out the steps in Section 10, SECURING YOUR CHILD'.

10. SECURING YOUR CHILD

1. Let your child sit in the child safety seat and place the XP-PAD 34 over the chest area of your child.
2. Pull out the vehicle belt and guide it in front of your child to the vehicle seat buckle 18.

⚠️ DANGER! Ensure the vehicle belt is not twisted, as otherwise the full protective effect of the retaining system is not ensured.

1. Engage the buckle tongue in the vehicle seat buckle 18 with a CLICK

2. Place the diagonal seat belt section 16 and lap belt section 15 on the side of the vehicle seatbelt buckle 18 into the light red belt guide 02 of the seat cushion.

DANGER! The vehicle seatbelt buckle is must not be positioned between the light red belt gilda (gand the armrest

1. Also place the lap belt section 15 on the other side of the seat cushion in the light red belt guide 02. DANGER! The lap belt section 5 must lie as low as possible over your child's hips on both sides.

1. Guide the diagonal seat belt section 18 into the dark red belt holder 91 of the headrest 22 until it has completely in the belt holder 67 and is not twisted. TIP! If the beckrest 67, conceals the belt holder 61, you can adjust the headrest 22 upwards. The diagonal seat belt section 10 can now be easily inserted. Now return the headrest 22 to the proper height.

1. Ensure that the diagonal belt 16 runs over the collarbone of your child and is not on the neck and that the key on the belt holder is (1) fully closed. ① TIP! You can still adjust the height of the headrest. 22 again here in the vehicle.

1. Open the Veloro fastener on the XP-PAD 04 and fold the top part of the XP-PAD 04 to the side.
2. Insert the diagonal ball 16 in the die nubby surface of the XP-PAD 04

1. Close the XP PAD 64 again by forcing the forced part back and closing the Velcro fastener.

△ DANGER! The diagonal seal bell section 10 must run diagonally backward. You can adjust the course of the bolt with your vehicle's adjustable belt deflector. △ DANGER! The diagonal bolt must never be directed forwards to the bolt deflector on the vehicle. In this case, use the child safety seat on the back seat only.

1. Tighten the vehicle seat belt by pulling on the diagonal seat bell section 16.

For the safety of your child, before every journey in the car check that...

the child safety seat is securely fastened;

the lap bell runs in the bright red bell guides on both sides of the seat cushion cc.

- the diagonal seat belt section on the side of the vehicle seat belt buck

In 15. Max runs through the light red belt guard 02 of the seat cushion. ▶ the diagonal seat belt, sectional runs through the dark red belt holder 01 of the headrest.

the diagonal seal bel, section 8 runs diagonally backward.

the straps are light and not twisted,

the XP-PAL is installed and used correctly.

The seatbell bucket must not be positioned on the red belt guide 62 in the seat cushion.

DANGER! If your child tries to open the vehicle till buckle 16, stop immediately as soon as possible. Check whether the child safety seat is correctly fastened and ensure that your child is correctly secured. Explain to your child the dangers associated with his actions.

UNFASTENING YOUR CHILD AND REMOVAL:

To unfaster your child or to remove the child safety seat, observe the steps in Section II „REMOVAL" [PAGE 1]

If you have any further questions regarding its use, please feel free to contact

BRITAX RÖMER

Knörsliche GmbH

D-5902711m

Germany

BRITAX EXCELSIOR

LIMITED

1 Churchill Way West

Hampshire SP102UW

Uales: Kirgazin

T.160(3)219345189

E. 96756 bilayer (100%)

WALO (1978) N

1+6)7(2013353)

F. 144121254324148 E. 192506-192507ay.com

www.hk.com